Xray XB2D (2019) Instruction Manual

2

The XRAY XB2 is a modern, high-competition premium luxury racing 1/10 electric 2WD off-road buggy
that is the epitome of high-performance and fine distinctive design. Your XB2 offers highest performance,
responsive handling, and traditionally exceptional XRAY quality, engineering, and design. The superb
craftsmanship and attention to detail are clearly evident everywhere on the XRAY XB2.

XB2 was designed around a no compromise platform; the attention to detail creates a low maintenance,
extra long life electric buggy. The ultra-low center of gravity (CG) and optimized weight balance makes
set-up, driving, and maintenance easy and quick.

The XRAY XB2 was created by blending highest-quality materials and excellent design. On high- speed flat
tracks or bumpy tracks, whether driving for fun or racing to win, the XB2 delivers outstanding performance,
speed, and precision handling.

We have made every effort to make these instructions as easy to understand as possible. However, if you
have any difficulties, problems, or questions, please do not hesitate to contact the XRAY support team at
[e-mail]. Also, please visit our web site at www.teamxray.com to find the latest updates, set-up
information, option parts, and many other goodies. We pride ourselves on taking excellent care of our
customers.

CUSTOMER SUPPORT

XRAY EUROPE

K Výstavisku 6992
91101 Trenčín
Slovakia, EUROPE
Phone: [phone]
Fax: [phone]
Email: [e-mail]

We have made every effort to make these instructions as easy to understand as possible. However, if you
have any difficulties, problems, or questions, please do not hesitate to contact the XRAY support team
at [e-mail]. Also, please visit our Web site at www.teamxray.com to find the latest updates,
set-up information, option parts, and many other goodies. We pride ourselves on taking excellent care
of our customers.
You can join thousands of XRAY fans and enthusiasts in our online community at: www.teamxray.com

XRAY USA

RC America, 2030 Century Center Blvd #15 Irving,
TX 75062
USA
Phone: [phone] * [phone]
Fax: [phone]
Email: [e-mail]

SAFETY PRECAUTIONS

Contains:
LEAD (CAS 7439-92-1) ANTIMONY (CAS 7440-36-0)
WARNING: This product contains a chemical known to the state of California to cause cancer and birth
defects or other reproductive harm.
CAUTION: CANCER HAZARD
Contains lead, a listed carcinogen. Lead is harmful if ingested. Wash thoroughly after using. DO NOT use
product while eating, drinking or using tobacco products. May cause chronic effects to gastrointestinal tract,
CNS, kidneys, and blood. MAY CAUSE BIRTH DEFECTS.

When building, using and/or operating this model always wear protective glasses and gloves.

Take appropriate safety precautions prior to operating this model. You are responsible for this model‘s
assembly and safe operation! Please read the instruction manual before building and operating this
model and follow all safety precautions. Always keep the instruction manual at hand for quick reference,

even after completing the assembly. Use only genuine and original authentic XRAY parts for maximum
performance. Using any third party parts on this model will void guaranty immediately.

Improper operation may cause personal and/or property damage. XRAY and its distributors have
no control over damage resulting from shipping, improper construction, or improper usage. XRAY
assumes and accepts no responsibility for personal and/or property damages resulting from the use of
improper building materials, equipment and operations. By purchasing any item produced by XRAY,
the buyer expressly warrants that he/she is in compliance with all applicable federal, state and local
laws and regulation regarding the purchase, ownership and use of the item. The buyer expressly agrees
to indemnify and hold harmless XRAY for all claims resulting directly or indirectly from the purchase,
ownership or use of the product. By the act of assembling or operating this product, the user accepts all
resulting liability. If the buyer is not prepared to accept this liability, then he/she should return this kit in
new, unassembled, and unused condition to the place of purchase.

IMPORTANT NOTES – GENERAL

• This product is not suitable for children under 16 years of age without the direct supervision of a
responsible and knowledgeable adult.

• Carefully read all manufacturers warnings and cautions for any parts used in the construction and use
of your model.

• Assemble this kit only in places away from the reach of very small children.

• First-time builders and users should seek advice from people who have building experience in order
to assemble the model correctly and to allow the model to reach its performance potential.

• Exercise care when using tools and sharp instruments.

• Take care when building, as some parts may have sharp edges.

• Keep small parts out of reach of small children. Children must not be allowed to put any parts in their
mouth, or pull vinyl bag over their head.

• Read and follow instructions supplied with paints and/or cement, if used (not included in kit).

• Immediately after using your model, do NOT touch equipment on the model such as the motor and
speed controller, because they generate high temperatures. You may seriously burn yourself seriously
touching them.

• Follow the operating instructions for the radio equipment at all times.

• Do not put fingers or any objects inside rotating and moving parts, as this may cause damage or
serious injury as your finger, hair, clothes, etc. may get caught.

• Be sure that your operating frequency is clear before turning on or running your model, and never
share the same frequency with somebody else at the same time. Ensure that others are aware of the
operating frequency you are using and when you are using it.

• Use a transmitter designed for ground use with RC cars. Make sure that no one else is using the same
frequency as yours in your operating area. Using the same frequency at the same time, whether it is
driving, flying or sailing, can cause loss of control of the RC model, resulting in a serious accident.

• Always turn on your transmitter before you turn on the receiver in the car. Always turn off the receiver
before turning your transmitter off.

• Keep the wheels of the model off the ground when checking the operation of the radio equipment.

• Disconnect the battery pack before storing your model.

• When learning to operate your model, go to an area that has no obstacles that can damage your

model if your model suffers a collision.

• Remove any sand, mud, dirt, grass or water before putting your model away.

• If the model behaves strangely, immediately stop the model, check and clear the problem.

• To prevent any serious personal injury and/or damage to property, be responsible when operating all
remote controlled models.

• The model car is not intended for use on public places and roads or areas where its operation can
conflict with or disrupt pedestrian or vehicular traffic.

• Because the model car is controlled by radio, it is subject to radio interference from many sources that
are beyond your control. Since radio interference can cause momentary loss of control, always allow a
safety margin in all directions around the model in order to prevent collisions.

• Do not use your model:

- Near real cars, animals, or people that are unaware that an RC car is being
driven.

- In places where children and people gather

- In residential districts and parks

- In limited indoor spaces

- In wet conditions

- In the street

- In areas where loud noises can disturb others, such as hospitals and
residential areas.

- At night or anytime your line of sight to the model may be obstructed or
impaired in any way.

To prevent any serious personal injury and/or damage to property, please be
responsible when operating all remote controlled models.

INTRODUCTION

FAILURE TO FOLLOW THESE INSTRUCTIONS WILL BE CONSIDERED AS ABUSE AND/OR NEGLECT.

3

IMPORTANT NOTES – ELECTRICAL

• Insulate any exposed electrical wiring (using heat shrink tubing or electrical tape) to prevent dangerous
short circuits. Take maximum care in wiring, connecting and insulating cables. Make sure cables are
always connected securely. Check connectors for if they become loose. And if so, reconnect them securely.
Never use R/C models with damaged wires. A damaged wire is extremely dangerous, and can cause
short-circuits resulting in fire. Please have wires repaired at your local hobby shop.

• Low battery power will result in loss of control. Loss of control can occur due to a weak battery in either
the transmitter or the receiver. Weak running battery may also result in an out of control car if your car‘s
receiver power is supplied by the running battery. Stop operation immediately if the car starts to slow
down.

• When not using RC model, always disconnect and remove battery.

• Do not disassemble battery or cut battery cables. If the running battery short-circuits, approximately
300W of electricity can be discharged, leading to fire or burns. Never disassemble battery or cut battery
cables.

• Use a recommended charger for the receiver and transmitter batteries and follow the instructions

correctly. Over-charging, incorrect charging, or using inferior chargers can cause the batteries to become
dangerously hot. Recharge battery when necessary. Continual recharging may damage battery and, in
the worst case, could build up heat leading to fire. If battery becomes extremely hot during recharging,
please ask your local hobby shop for check and/or repair and/or replacement.

• Regularly check the charger for potential hazards such as damage to the cable, plug, casing or other
defects. Ensure that any damage is rectified before using the charger again. Modifying the charger may
cause short-circuit or overcharging leading to a serious accident. Therefore do not modify the charger.

• Always unplug charger when recharging is finished.

• Do not recharge battery while battery is still warm. After use, battery retains heat. Wait until it cools
down before charging.

• Do not allow any metal part to short circuit the receiver batteries or other electrical/electronic device on
the model.

• Immediately stop running if your RC model gets wet as may cause short circuit.

• Please dispose of batteries responsibly. Never put batteries into fire.

WARRANTY

XRAY guarantees this model kit to be free from defects in both material and workmanship within 30 days
of purchase. The total monetary value under warranty will in no case exceed the cost of the original kit
purchased. This warranty does not cover any components damaged by use or modification or as a result
of wear. Part or parts missing from this kit must be reported within 30 days of purchase. No part or parts
will be sent under warranty without proof of purchase. Should you find a defective or missing part, contact
the local distributor. Service and customer support will be provided through local hobby store where you
have purchased the kit, therefore make sure to purchase any XRAY products at your local hobby store.
This model racing car is considered to be a high-performance racing vehicle. As such this vehicle will be
used in an extreme range of conditions and situations, all which may cause premature wear or failure of
any component. XRAY has no control over usage of vehicles once they leave the dealer, therefore XRAY
can only offer warranty against all manufacturer‘s defects in materials, workmanship, and assembly at
point of sale and before use. No warranties are expressed or implied that cover damage caused by what is
considered normal use, or cover or imply how long any model cars‘ components or electronic components
will last before requiring replacement.

Due to the high performance level of this model car you will need to periodically maintain and replace
consumable components. Any and all warranty coverage will not cover replacement of any part or
component damaged by neglect, abuse, or improper or unreasonable use. This includes but is not
limited to damage from crashing, chemical and/or water damage, excessive moisture, improper or no

maintenance, or user modifications which compromise the integrity of components. Warranty will not
cover components that are considered consumable on RC vehicles. XRAY does not pay nor refund shipping
on any component sent to XRAY or its distributors for warranty. XRAY reserves the right to make the final
determination of the warranty status of any component or part.

Limitations of Liability

XRAY makes no other warranties expressed or implied. XRAY shall not be liable for any loss, injury or
damages, whether direct, indirect, special, incidental, or consequential, arising from the use, misuse, or
abuse of this product and/or any product or accessory required to operate this product. In no case shall
XRAY‘s liability excess the monetary value of this product.

Take adequate safety precautions prior to operating this model. You are responsible for this
model’s assembly and safe operation.

Disregard of the any of the above cautions may lead to accidents, personal injury, or property
damage. XRAY MODEL RACING CARS assumes no responsibility for any injury, damage, or
misuse of this product during assembly or operation, nor any addictions that may arise from
the use of this product.
All rights reserved.

QUALITY CERTIFICATE

XRAY MODEL RACING CARS uses only the highest quality materials, the best compounds for molded parts
and the most sophisticated manufacturing processes of TQM (Total Quality Management). We guarantee
that all parts of a newly-purchased kit are manufactured with the highest regard to quality. However, due
to the many factors inherent in model racecar competition, we cannot guarantee any parts once you start

racing the car. Products which have been worn out, abused, neglected or improperly operated will not be
covered under warranty.
We wish you enjoyment of this high-quality and high-performance RC car and wish you best success on the
track!

In line with our policy of continuous product development, the exact specifications of the kit may vary. In the unlikely event
of any problems with your new kit, you should contact the model shop where you purchased it, quoting the part number.
We do reserve all rights to change any specification without prior notice. All rights reserved.

R/C & BUILDING TIPS

• Make sure all fasteners are properly tightened. Check them periodically.

• Make sure that chassis screws do not protrude from the chassis.

•

For the best performance, it is very important that great care is taken to ensure the free movement of all

parts.

•

Clean all ball-bearings so they move very easily and freely.

• Tap or pre-thread the plastic parts when threading screws.

• Self-tapping screws cut threads into the parts when being tightened. Do not use excessive force when

tightening the self-tapping screws because you may strip out the thread in the plastic. We recommended
you stop tightening a screw when you feel some resistance.

• Ask your local hobby shop for any advice.

Please support your local hobby shop. We at XRAY Model Racing Cars support all local hobby dealers.
Therefore we ask you, if at all possible, to purchase XRAY products at your hobby dealer and give them
your support like we do. If you have difficulty finding XRAY products, please check out www.teamxray.com to
get advice, or contact us via email at [e-mail], or contact the XRAY distributor in your country.

4

NOT
INCLUDED

To ensure that you always have access
to the most up-to-date version of the
Set-up Book you can download the
HUDY Set-up Book from their web site
at [www.hudy.net] By offering this online
version instead of including a hardcopy
printed version in kits, you will always
be assured of having the most current
updated version.

XRAY offers wide range of optional
tuning parts which are listed in a
table like this. Please refer to the
exploded view of each main section
to verify which part is included in
the kit while all other parts are
available only as an optional part
and must be purchased separately.

SYMBOLS USED

EQUIPMENT REQUIRED

EQUIPMENT
INCLUDED

HUDY Premium Silicone Oils

Oil 300cSt
(#106330)

Oil 350cSt
(#106335)

Transmitter Steering ServoReceiver

Lexan™ Paint Battery Charger Tires & Inserts

Graphite Grease

(HUDY #106210)

Bearing Oil

(HUDY #106230)

CA glue

SAMPLE OF
OPTIONAL PARTS

#32XXXX OPTION 1
#32XXXX OPTION 2
#32XXXX INCLUDED
#32XXXX OPTION 3

Speed Controller LiPo Battery

Pinion Gear with Setscrew

Electric Motor &

Double-sided Tape
(HUDY #107875)

L=R

2x

CA

OIL

Part bags used Assemble left and

right sides the

same way

Assemble in the

specified order

Pay attention

here

Assemble as many

times as specified

(here twice)

Apply CA glue

Apply oil

Optional

parts

TL

05

Tighten screw

gently

Completed

assembly

Detail

Apply

threadlock

Apply greaseScale Ensure smooth

non-binding

movement

Follow Set-Up Book

1:1

DETAIL

Apply cleaner

Arm Reamer 3.0mm

TOOLS REQUIRED

Side Cutters

(HUDY #189010)

Turnbuckle Wrench

3mm (HUDY #181030)

Reamer (HUDY #107600) or (HUDY #107601)

Tweezer

Combination Pliers

(HUDY #189020)

HUDY TOOLS:

Scissors

(HUDY #188990)

3.0 mm

Special Tool for

turnbuckles, nuts

(HUDY #181090)

Socket 5.5mm

Socket 7.0mm

Allen 2.0mm

Allen 1.5mm

Pocket Hobby Knife

(HUDY #188981)

Professional Multi Tool

(HUDY #183011)

5

XB2 TECH TIPS

SHOCK TOWER PROTECTION

Please follow the Instruction Manual and seal the edges of the shock towers with CA to reinforce them and help prevent
delamination.

Fine sandpaper

Use fine sandpaper to
sand smooth the edges of
all graphite parts.

Apply CA glue to all edges
of the graphite parts.

GRAPHITE PARTS PROTECTION

TIP

Protect all XB2 Graphite Parts:

• Front shock tower

• Rear shock tower

DRIVE SHAFT PIN SERVICING

TIP

To enjoy the longest possible lifespan of the drive shafts and diff outdrives, it is extremely important to properly service the drive shaft pins.
Inspect the pins after every 3 hours of runtime. If the pins show any wear, replace them with new pins.

For quick & easy drive pin replacements use
#106000 HUDY Drive Pin Replacement Tool
together with #106036 Ejector Pivot Pin &
Alternating Pivot 2.5mm.

To replace the worn pins use only
premium HUDY drive pins #106053.

Do not use drive shafts
when the pins are worn.

Press out the worn pins.

Press in new pins and
regularly inspect for wear.

6

930120

365080

305092

325072

365080

325053

325022

930126

325061

325012

930126

BA 2.6x6x1

GRAPHITE GREASE

(HUDY #106210)

2.0mm carbide balls (6x)

CUTAWAY VIEW

941014

941014

1. DIFFERENTIAL

30 5092 BALL DIFFERENTIAL SPRING
32 5002 BALL ADJUSTABLE DIFFERENTIAL FOR 2.5mm PIN SET - SPRING STEEL™
32 5012 BALL DIFF SHORT OUTPUT SHAFT - HUDY SPRING STEEL™
32 5022 BALL DIFF LONG OUTPUT SHAFT - HUDY SPRING STEEL™
32 5053 COMPOSITE BALL DIFFERENTIAL GEAR 53T
32 5061 SCREW FOR BALL DIFF ADJUSTMENT - SPRING STEEL™

32 5072 ALU BALL DIFFERENTIAL NUT
36 5080 DIFF WASHER 17 x 24.5 x 1 (2)
93 0120 CARBIDE BALL 2.4mm FOR BALL DIFF (12)
93 0126 CARBIDE BALL-BEARING AXIAL 2.6x6x1
93 0508 BALL-BEARING 5x8x2.5 STEEL SEALED - OIL (2)
94 1014 BALL-BEARING 10x15x4 RUBBER SEALED - GREASE (2)

BAG

930508

#324901
GEAR DIFFERENTIAL FOR 2.5mm PIN - SET

#325326
REAR DRIVE SHAFT 73mm WITH 2.5mm PIN
HUDY SPRING STEEL™

73mm

7

930508

BB 5x8x2.5

930120

B 2.4

941014

BB 10x15x4

DIFF GREASE
(HUDY #106211)

Square shape orientation on TOP side.

Round shape orientation on BOTTOM side.

NOTE ORIENTATION

2.0mm

THREAD LOCK

DIFF GREASE
(HUDY #106211)

CUTAWAY
VIEW

DIFF GREASE
(HUDY #106211)

2.0mm

DIFF GREASE
(HUDY #106211)

BEARING OIL
(HUDY #106230)

OIL

2.4mm carbide balls (12x)

1. DIFFERENTIAL

Use HUDY Ball-Bearing Grease

#106220 - STANDARD
#106221 - BLUE
#106222 - RED

8

BALL DIFF BREAK-IN & SET-UP INFO

BEFORE RACING, follow these steps to properly break in the differential.

Loosen the adjustment screw 1/2 turn (180° CCW).

2.0mm

2.0mm

2.0mm

(180° CCW)

½

LOOSEN THE ADJUSTMENT SCREW

FULLY TIGHTEN

FULLY TIGHTEN

LOOSEN THE ADJUSTMENT SCREW 1/8 TURN (45˚CCW).

2.0mm

LOOSEN THE ADJUSTMENT SCREW

(45˚CCW)

HOLD THE LEFT

REAR WHEEL

HOLD THE SPUR GEAR

ROTATE THE WHEEL IN THE
DIRECTION OF TRAVEL

TABLE

2x

BALL DIFFERENTIAL IS NOW READY

9

2. REAR TRANSMISSION

BAG

BAG

BAG

32 3015 COMPOSITE FRONT-MID MOTOR GEAR BOX (3 GEARS) - NARROW - SET
32 4012 ALU FRONT-MID MOTOR (3 GEARS) PLATE - SWISS 7075 T6 (3mm)
32 4110 ALU TOP SHAFT 20T - SWISS 7075 T6 - HARD COATED
32 4124 ALU 2-PAD SLIPPER CLUTCH PLATE - SWISS 7075 T6
32 4125 ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER
32 4190 ALU SLIPPER CLUTCH SHIM
32 4236 COMPOSITE GEAR 36T - GRAPHITE
36 4131 SLIPPER CLUTCH PAD “SLS” - V2 (2)
36 4181 SLIPPER CLUTCH SPRING C=45 - BLACK
36 5881 COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 81T / 48
90 2310 HEX SCREW SH M3x10 (10)

30 3141 ALU SHIM 3x5x1.0mm (10)
32 3016 COMPOSITE MID MOTOR GEAR BOX (3 GEARS) - NARROW - SET
32 4011 ALU MID & REAR MOTOR PLATE - SWISS 7075 T6 (3mm)
32 4225 COMPOSITE GEAR 25T - GRAPHITE

324190

365881

364131

324124

324125

981310

940613

324011

323016

902340

324012

980320

980320

324225

303141

325002

902320

902314

323016

981310

323016

323016

902316

364181

364131

930308

940512

324110

903308

323015

324236

981310

323015

323015

902310

930308

960040

90 2316 HEX SCREW SH M3x16 (10)
90 2320 HEX SCREW SH M3x20 (10)
90 3308 HEX SCREW SFH M3x8 (10)
93 0308 BALL-BEARING 3x8x4 STEEL SEALED - OIL (2)
94 0512 BALL-BEARING 5x12x4 RUBBER SEALED - OIL (2)
94 0613 BALL-BEARING 6x13x5 RUBBER SEALED - OIL (2)
96 0040 NUT M4 (10)
98 0320 PIN 3x20 (10)
98 1310 PIN 3x10 (10)

32 5002 BALL ADJUSTABLE DIFF FOR 2.5mm PIN - SET - HUDY SPRING STEEL™

3-PAD SLIPPER CLUTCH SPUR GEAR

#365875 75T / 48 OPTION
#365878 78T / 48 OPTION
#365881 81T / 48 INCLUDED
#365884 84T / 48 OPTION
#365887 87T / 48 OPTION

GEAR BOX

MIDDLE MOTOR POSITION

GEAR BOX

FRONT MOTOR POSITION

(For HIGH TRACTION track)

For Front motor Gear box assembly follow instructions on page 10 . For Middle motor Gear box assembly follow instructions on page 13 .

FRONT Motor Position

MIDDLE Motor Position

Top shaft in LOWER position

Top shaft in HIGHER position

(For LOW TRACTION track)

BAG

90 2314 HEX SCREW SH M3x14 (10)
90 2340 HEX SCREW SH M3x40 (10)

BAG

#323015-G
FRONT-MID MOTOR GEAR BOX (3 GEARS)
GRAPHITE - NARROW - SET

#323017
MID MOTOR GEAR BOX (4 GEARS)
NARROW - SET

#980320-T
TITAN PIN 3x20 (2)

#324100
SLIPPER ELIMINATOR - SET
(69T / 48 SPUR GEAR)

#325872
SLIPPER ELIMINATOR
SPUR GEAR 72T / 48

10

2. REAR TRANSMISSION

981310

P 3x10

980320

P 3x20

940613

BB 6x13x5

OIL

BEARING OIL
(HUDY #106230)

3x10mm

3x10mm

3x20mm

930308

BB 3x8x4

OIL

OIL

NOTE ORIENTATION

36T

GRAPHITE GREASE

(HUDY #106210)

BEARING OIL
(HUDY #106230)

BEARING OIL

(HUDY #106230)

GEAR BOX

FRONT MOTOR POSITION

(For HIGH TRACTION track)

#323015-G
COMPOSITE FRONT-MID
MOTOR GEAR BOX (3 GEARS)
GRAPHITE - NARROW - SET

11

2. REAR TRANSMISSION

902316

SH M3x16

902310

SH M3x10

902320

SH M3x20

940512

BB 5x12x4

OIL

GRAPHITE GREASE
(HUDY #106210)

BEARING OIL

(HUDY #106230)

"CLICK"

3x20mm

3x20mm

3x16mm

3x16mm

3x16mm

903308

SFH M3x8

Bearing with BLUE

rubber covers

12

2. REAR TRANSMISSION

0mm

DETAIL

960040

N M4

NOTE

ORIENTATION

3-PAD SLIPPER CLUTCH SPUR GEAR

#365875 75T / 48 OPTION
#365878 78T / 48 OPTION
#365881 81T / 48 INCLUDED
#365884 84T / 48 OPTION
#365887 87T / 48 OPTION

13

2. REAR TRANSMISSION

303141

SHIM 3x5x1

940512

BB 5x12x4

940613

BB 6x13x5

902340

SH M3x40

GEAR BOX

MIDDLE MOTOR POSITION

(For LOW TRACTION track)

981310

P 3x10

980320

P 3x20

3x20mm

3x10mm

3x10mm

930308

BB 3x8x4

OIL

OIL

NOTE ORIENTATION

25T

GRAPHITE GREASE

(HUDY #106210)

BEARING OIL

(HUDY #106230)

BEARING OIL
(HUDY #106230)

3x5x1mm

3x5x1mm

OIL

OIL

BEARING OIL

(HUDY #106230)

BEARING OIL

(HUDY #106230)

5x12x4mm

CLOSED

OPEN

6x13x5mm

BAG

Bearing with BLUE

rubber covers.

14

(Factory pre-assembled)

2. REAR TRANSMISSION

DETAIL

960040

N M4

Flush with
end of shaft

NOTE ORIENTATION

NOTE ORIENTATION

902314

SH M3x14

SLIPPER CLUTCH SPUR GEARS

#365875 75T / 48 OPTION
#365878 78T / 48 OPTION
#365881 81T / 48 INCLUDED
#365884 84T / 48 OPTION
#365887 87T / 48 OPTION