Xpress XPRESSO M1 Instruction Manual

Download

Page 1

INSTRUCTION MANUAL

1/10 RWD ELECTRIC M CHASSIS KIT

Page 2

2. XP-10008 Gear Differential Case (1)

1. XP-10008 Gear Differential Cover (1)

3. XP-10011 Differential Gasket (1)

4. XP-10051 Differential O-ring (Big) (1)

5. XP-10051 Differential O-ring (Small) (2)

6. XP-10009 Differential Bevel Gears (2)

7. XP-10011 Spacer 5x15.5x0.4mm (2)

8. XP-10011 Pin 2x9.7mm (2)

9. XP-10010

Alu. Gear Diff Outdrive Adapter (2)

1. GEAR DIFFERENTIAL

ATTENTION:

BAG A BAG o

Page 3

1. XP-10009 Differential Satellite Gears (4)

2. XP-10011 Spacer 3.5x9.5x0.2mm (4)

3. XP-10009 Composite Gear Diff Cross (1)

4. XP-10011

Flat Head Screw M2.5 x10mm (4)

5. 3000Cst Oil (1)

Fill 3000CST diff oil to differential up to the top of the diff pin. DO NOT fill the diff to the top of the housing

Page 4

2. Shock Body (4) Option Parts: XP-10057

7. XP-10051 O-Ring (Small) (4)

11. XP-10016 Shock Rod Guide (4)

4. XP-10039 Cylinder End (4)

5. XP-10051 Oil Seal (4)

6. XP-10051 O-Ring (Large) (4)

3. XP-10039 Cylinder Nut (4)

8. XP-10016 Pistons - 1 hole (2)

9. XP-10016 Pistons - 2 holes (2)

15. XP-10050 Shock Shaft (4)

14. XP-10015 Shock End (4)

13. XP-10015 Shock Head (4)

1. XP-10039 Cylinder Cap (4)

10. XP-10016 Spacer (4)

12. XP-40047 E-Clips 2.5mm (8)

16. 500Cst Oil (1)

BAG B BAG O

front rear

X2 X2

2. SHOCK ABSORBERS

1. Fully extend the piston rod so the bottom of the shock body.

2. Hold the shock upright and slightly overfill the shock body with shock oil.

3. Let the oil settle and allow air bubbles to rise to the top.

4. Slowly move the piston up and down to allow oil into all cavities within the shock body.

5. Extend the piston rod most of the way out of the shock body. Let the shock rest till no air bubbles visible in the oil.

6. Add shock oil as necessary.

Page 5

X2 X2

1. XP-10079 Shock Spring - White (2)

2. XP-10078 Shock Spring - Blue (2)

3. XP-10015 Spring Cup (4)

1 2

front rear

Page 6

1.50

Notice

1. XP-10012 Shock Mount - F (2)

3. XP-10042 Ball Stud 4.8 x 3.5mm (4)

5. XP-40035 Round Head M2.5 x 6mm (4)

6. XP-40036 Round Head M3 x 6mm (4)

4. XP-10043 Ball Stud 4.8 x 5mm (2)

7. XP-10090 Spacer 3 x 6 x 2mm (2)

2. XP-10012 Shock Mount - R (2)

10. XP-10094 Rear Lower Arm (2)

8. XP-10093 Front Lower Arm - Right (1)

9. XP-10093 Front Lower Arm - Left (1)

left right

3. FRONT LOWER ARM

4. REAR LOWER ARM

BAG c

Page 7

1. XP-10091 Main Chassis (1)

2. XP-10003 Arm Joint Spacer (8)

To Arm Joint

3. XP-10046 Ball Nut 5.5mm (8)

4. XP-40041 Flat Head Screw M3 x 6mm (4)

5. XP-40042 Flat Head Screw M3 x 7mm (4)

6. XP-40048 E-Clips 6mm (8)

7. XP-10090 Spacer 3 x 7 x 2mm (4)

To Arm Joint

BAG c

5. LOWER ARM TO CHASSIS

BAG p

Page 8

1. XP-10028 Front Bulkhead - Right (1)

3. XP-10030 Rear Bulkhead - Right (1)

4. XP-10029 Rear Bulkhead - Left (1)

5. XP-40038 Round Head M3 x 14mm (1)

6. XP-40036 Round Head M3 x 6mm (4)

7. XP-40041 Flat Head M3 x 6mm (6)

8. XP-40043 Ball Stud 4.8 x 5mm (4)

9. XP-10054 Ball Bearing 3 x 6 x 2.5mm (3)

10. XP-10090 Spacer 3 x 5 x 3mm (1)

2. XP-10027 Front Bulkhead - Left (1)

left

right

BAG d

6. BULKHEAD TO CHASSIS

BAG e

5 9

Page 9

1. XP-40050

Round Head M3 x 10mm (1)

13. XP-10036

Servo Saver Extender (1)

14. XP-10012

Servo Saver For KO / Sanwa (1)

15. XP-10012

Servo Saver For Futaba (1)

16. XP-10012

Servo Saver Arm (1)

2. XP-40037

Round Head M3 x 8mm (2)

3. XP-40036

Round Head M3 x 6mm (4)

4. XP-40041

Flat Head M3 x 6mm (6)

5. XP-10054

Ball Bearing 5 x 8 x 2.5mm (1)

6. XP-10006

Servo Spacer (4)

7. XP-10045

Ball Nut 4.8mm (2)

8. XP-10012

Servo Saver Spring - Small (1)

9. XP-10012

Servo Saver Spring - Middle (1)

10. XP-10012

Servo Saver Spring - Large (1)

11. XP-10034

Servo Mount - Rear (1)

12. XP-10035

Servo Mount - Front (1)

17. XP-10012

Servo Saver Cover (1)

Servo (NOT INCLUDED)

14 / 15

BAG f

7. STEERING

BAG g

Page 10

1.XP-10092 Upper Deck (2)

4. XP-10037

Upper Deck Post (1)

10. XP-10006

Driver Shaft Spacer (1)

11. XP-10044

Ball Stud 4.8 x 8mm (4)

12. XP-40036

Round Head M3 x 6mm (2)

13. XP-40037

Round Head M3 x 8mm (2)

14. XP-40044

Set Screw M3 x 3mm (2)

15. XP-10054

Ball Bearing 10 x 15 x 4mm (2)

16. XP-10054

Ball Bearing 5 x 9 x 3mm (2)

17. XP-10052

Driver Belt 189T (1)

3. XP-10006

Pulley 20T (1)

Driver Shaft (1)

Option Parts: XP-10085

5. XP-10031

Rear Upper Clamp - Right (1)

6. XP-10031

Rear Upper Clamp - Left (1)

7. XP-10002

Bearing Hub -15mm (2)

8. XP-10002

Bearing Hub -9mm (2)

9. XP-10033

Spur Gear Adapter (1)

Apply C.A.

BAG h

Page 11

1. XP-10020 Rear Shock Tower (1)

2. XP-10019 Front Shock Tower (1)

3. XP-40040 Round Head Screw 3 x 18mm (2)

4. XP-40039 Round Head Screw 3 x 16mm (2)

5. XP-40036 Round Head Screw 3 x 6mm (4)

6. XP-10038 Shock Post (4)

7. XP-10045 Ball Nut 4.8mm (4)

8. XP-10090 Spacer 3 x 6 x 1mm (2)

BAG i

9. SHOCK TOWER

Page 12

Normal Position

More Grip Position

Rear Suspension Check:

Default Setting : (Ride Height 4.0mm) A = 35.5mm B = 24.9mm

C = 45.7mm

Default Setting : (Ride Height 4.5mm) D = 39.1 mm E = 31.1 mm F = 37.5 mm(More Grip Position)

Rod Reference (Ride Height 4.5mm)

Rod Reference (Ride Height 4mm)

1. XP-10003

Upper Arm - Left (2)

2. XP-10003

Upper Arm - Right (2)

10. XP-10098

Turnbuckle M3 x 14mm (2)

11. XP-10098

Turnbuckle M3 x 18mm (2)

12. XP-10098

Turnbuckle M3 x 20mm (2)

13. XP-10098

Turnbuckle M3 x 24mm (6)

3. XP-10002

Ball End 4.8 x 15mm (8)

5. XP-10002

Ball End 4.8 x 13mm (4)

7. XP-10048

Pivot Ball (4)

9. XP-40037

Round Head Screw M3 x 8mm (4)

6. XP-10003

Ball End 4.8 x 8.5mm (2)

8. XP-10003

Ball End 4.8 x 10.5mm (4)

4. XP-10002

Ball End 4.8 x 10mm (4)

13 33

1 2

wrong less grip more grip

front

rear

BAG j

10. SUSPENSION

Page 13

2. XP-10097 Drive Shaft 28mm (2)

XP-10041 Front Axle (2)

7. XP-10004 Drive Shaft Cap (2)

4. XP-10026 Set Screw M3 x 3mm (2)

8. XP-10026 Pin 2 x 10mm - Flat (2)

9. XP-10026 Pin 2 x 10mm (6)

1. XP-10097 Drive Axle (2)

6. XP-10026 Axle Spring (2)

5. XP-10026 Cross Joint (2)

10. XP-10044 Ball Stud 4.8 x 8mm (2)

11. XP-10043 Ball Stud 4.8 x 5mm (4)

12. XP-10047 Ball Stud 5.5 x 3.8mm (4)

13. XP-10045 Ball Nut 4.8mm (2)

14. XP-40037 Round Head M3 x 8mm (2)

15. XP-40034 Cap Head M2 x 5mm (4)

16.

Wheel Adapter (4)

Option Parts: XP-10061

17.

XP-10054

Ball Bearing 5 x 10 x 4mm (8)

18. XP-10013 Front Knuckle Arm (2)

19. XP-10014 Rear Upright - Left (1)

20. XP-10014 Rear Upright - Right (1)

12 13

BAG k BAG l

Page 14

Tie Rod C (45.7mm)

Tie Rod F (37.5mm)

1. XP-10003

Arm Ball Joint - 5.5mm (4)

2. XP-40048

E-Clips - 6mm (4)

BAG G

Page 15

8 9

5. XP-10001 Bumber (1)

1. XP-10001 Body Post - Front (2)

2. XP-10001 Body Post - Rear (2)

4. XP-10001 Foam Plate (1)

10. XP-40041 Flat Head M3 x 6mm (13)

11. XP-40049 Flat Head M3 x 10mm (2)

9. XP-40036 Round Head M3 x 6mm (4)

8. XP-10053 Spur Gear (1)

3. XP-10095 Bumber Foam (1)

6. XP-10005 Battery Mount Cover (2)

7. XP-10005 Battery Mount (2)

12. XP-10055 Body Clips (4)

BAG m

11. FRONT & REAR ASSEMBLY

BAG n

Page 16

3. XP-10090 Spacer 3 x 6 x 1mm (2)

2. XP-40037 Round Head M3 x 8mm (2)

4. XP-10001 Antenna Holder (1)

1. XP-40041 Flat Head M3 x 6mm (1)

6. XP-10055 Body Clips (4)

5. XP-10001 Body Mount (4)

Motor (NOT INCLUDED)

Pinion Gear (NOT INCLUDED)

ESC (NOT INCLUDED)

Receiver (NOT INCLUDED)

Set Screw M3x3mm (NOT INCLUDED)

12. FINAL ASSEMBLY

Page 17

1. Wheel Nut (4)

2. XP-40041 Flat Head M3 x 6mm (2)

3. XP-10024 Gyro Plate (1)

Page 18

30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

90 5.70 5.52 5.34 5.18 5.03 4.89 4.75 4.62 4.50 4.38 4.28 4.17 4.07 3.98 3.89 3.80 3.72 3.64 3.56 3.49 3.42 3.35 3.29 3.23

91 5.76 5.58 5.40 5.24 5.09 4.94 4.80 4.67 4.55 4.43 4.32 4.22 4.12 4.02 3.93 3.84 3.76 3.68 3.60 3.53 3.46 3.39 3.33 3.26

92 5.83 5.64 5.46 5.30 5.14 4.99 4.86 4.72 4.60 4.48 4.37 4.26 4.16 4.07 3.97 3.88 3.80 3.72 3.64 3.57 3.50 3.43 3.36 3.30

93 5.89 5.70 5.52 5.35 5.20 5.05 4.91 4.78 4.65 4.53 4.42 4.31 4.21 4.11 4.02 3.93 3.84 3.76 3.68 3.61 3.53 3.46 3.40 3.33

94 5.95 5.76 5.58 5.41 5.25 5.10 4.96 4.83 4.70 4.58 4.47 4.36 4.25 4.15 4.06 3.97 3.88 3.80 3.72 3.64 3.57 3.50 3.43 3.37

95 6.02 5.82 5.64 5.47 5.31 5.16 5.01 4.88 4.75 4.63 4.51 4.40 4.30 4.20 4.10 4.01 3.92 3.84 3.76 3.68 3.61 3.54 3.47 3.41

96 6.08 5.88 5.70 5.53 5.36 5.21 5.07 4.93 4.80 4.68 4.56 4.45 4.34 4.24 4.15 4.05 3.97 3.88 3.80 3.72 3.65 3.58 3.51 3.44

97 6.14 5.95 5.76 5.58 5.42 5.27 5.12 4.98 4.85 4.73 4.61 4.50 4.39 4.29 4.19 4.10 4.01 3.92 3.84 3.76 3.69 3.61 3.54 3.48

98 6.21 6.01 5.82 5.64 5.48 5.32 5.17 5.03 4.90 4.77 4.66 4.54 4.43 4.33 4.23 4.14 4.05 3.96 3.88 3.80 3.72 3.65 3.58 3.51

99 6.27 6.07 5.88 5.70 5.53 5.37 5.23 5.08 4.95 4.82 4.70 4.59 4.48 4.37 4.28 4.18 4.09 4.00 3.92 3.84 3.76 3.69 3.62 3.55

100 6.33 6.13 5.94 5.76 5.59 5.43 5.28 5.14 5.00 4.87 4.75 4.63 4.52 4.42 4.32 4.22 4.13 4.04 3.96 3.88 3.80 3.73 3.65 3.58

101 6.40 6.19 6.00 5.82 5.64 5.48 5.33 5.19 5.05 4.92 4.80 4.68 4.57 4.46 4.36 4.26 4.17 4.08 4.00 3.92 3.84 3.76 3.69 3.62

102 6.46 6.25 6.06 5.87 5.70 5.54 5.38 5.24 5.10 4.97 4.85 4.73 4.61 4.51 4.40 4.31 4.21 4.12 4.04 3.96 3.88 3.80 3.73 3.66

103 6.52 6.31 6.12 5.93 5.76 5.59 5.44 5.29 5.15 5.02 4.89 4.77 4.66 4.55 4.45 4.35 4.25 4.16 4.08 3.99 3.91 3.84 3.76 3.69

104 6.59 6.37 6.18 5.99 5.81 5.65 5.49 5.34 5.20 5.07 4.94 4.82 4.70 4.60 4.49 4.39 4.30 4.20 4.12 4.03 3.95 3.87 3.80 3.73

105 6.65 6.44 6.23 6.05 5.87 5.70 5.54 5.39 5.25 5.12 4.99 4.87 4.75 4.64 4.53 4.43 4.34 4.24 4.16 4.07 3.99 3.91 3.84 3.76

106 6.71 6.50 6.29 6.10 5.92 5.75 5.59 5.44 5.30 5.16 5.04 4.91 4.80 4.68 4.58 4.48 4.38 4.29 4.20 4.11 4.03 3.95 3.87 3.80

107 6.78 6.56 6.35 6.16 5.98 5.81 5.65 5.49 5.35 5.21 5.08 4.96 4.84 4.73 4.62 4.52 4.42 4.33 4.24 4.15 4.07 3.99 3.91 3.84

108 6.84 6.62 6.41 6.22 6.04 5.86 5.70 5.55 5.40 5.26 5.13 5.00 4.89 4.77 4.66 4.56 4.46 4.37 4.28 4.19 4.10 4.02 3.95 3.87

109 6.90 6.68 6.47 6.28 6.09 5.92 5.75 5.60 5.45 5.31 5.18 5.05 4.93 4.82 4.71 4.60 4.50 4.41 4.31 4.23 4.14 4.06 3.98 3.91

110 6.97 6.74 6.53 6.33 6.15 5.97 5.81 5.65 5.50 5.36 5.23 5.10 4.98 4.86 4.75 4.64 4.54 4.45 4.35 4.27 4.18 4.10 4.02 3.94

111 7.03 6.80 6.59 6.39 6.20 6.03 5.86 5.70 5.55 5.41 5.27 5.14 5.02 4.90 4.79 4.69 4.58 4.49 4.39 4.30 4.22 4.14 4.06 3.98

112 7.09 6.86 6.65 6.45 6.26 6.08 5.91 5.75 5.60 5.46 5.32 5.19 5.07 4.95 4.84 4.73 4.63 4.53 4.43 4.34 4.26 4.17 4.09 4.02

113 7.16 6.93 6.71 6.51 6.31 6.13 5.96 5.80 5.65 5.51 5.37 5.24 5.11 4.99 4.88 4.77 4.67 4.57 4.47 4.38 4.29 4.21 4.13 4.05

114 7.22 6.99 6.77 6.56 6.37 6.19 6.02 5.85 5.70 5.55 5.42 5.28 5.16 5.04 4.92 4.81 4.71 4.61 4.51 4.42 4.33 4.25 4.17 4.09

115 7.28 7.05 6.83 6.62 6.43 6.24 6.07 5.91 5.75 5.60 5.46 5.33 5.20 5.08 4.97 4.86 4.75 4.65 4.55 4.46 4.37 4.28 4.20 4.12

116 7.35 7.11 6.89 6.68 6.48 6.30 6.12 5.96 5.80 5.65 5.51 5.38 5.25 5.13 5.01 4.90 4.79 4.69 4.59 4.50 4.41 4.32 4.24 4.16

20 38 1.90

Xpress Xpresso M1 (64Pitch-Spur Gear 90T~116T)

Pinion Gear

Spur Gear

Belt Pully =

Differential Pully=

Internal Gear Ratio =

Page 19

53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

69 2.47 2.43 2.38 2.34 2.30 2.26 2.22 2.19 2.15 2.11 2.08 2.05 2.02 1.99 1.96 1.93 1.90 1.87 1.85 1.82 1.80 1.77 1.75 1.73

70 2.51 2.46 2.42 2.38 2.33 2.29 2.25 2.22 2.18 2.15 2.11 2.08 2.05 2.02 1.99 1.96 1.93 1.90 1.87 1.85 1.82 1.80 1.77 1.75

71 2.55 2.50 2.45 2.41 2.37 2.33 2.29 2.25 2.21 2.18 2.14 2.11 2.08 2.04 2.01 1.98 1.96 1.93 1.90 1.87 1.85 1.82 1.80 1.78

72 2.58 2.53 2.49 2.44 2.40 2.36 2.32 2.28 2.24 2.21 2.17 2.14 2.10 2.07 2.04 2.01 1.98 1.95 1.93 1.90 1.87 1.85 1.82 1.80

73 2.62 2.57 2.52 2.48 2.43 2.39 2.35 2.31 2.27 2.24 2.20 2.17 2.13 2.10 2.07 2.04 2.01 1.98 1.95 1.93 1.90 1.87 1.85 1.83

74 2.65 2.60 2.56 2.51 2.47 2.42 2.38 2.34 2.30 2.27 2.23 2.20 2.16 2.13 2.10 2.07 2.04 2.01 1.98 1.95 1.93 1.90 1.87 1.85

75 2.69 2.64 2.59 2.54 2.50 2.46 2.42 2.38 2.34 2.30 2.26 2.23 2.19 2.16 2.13 2.10 2.07 2.04 2.01 1.98 1.95 1.93 1.90 1.88

76 2.72 2.67 2.63 2.58 2.53 2.49 2.45 2.41 2.37 2.33 2.29 2.26 2.22 2.19 2.16 2.12 2.09 2.06 2.03 2.01 1.98 1.95 1.93 1.90

77 2.76 2.71 2.66 2.61 2.57 2.52 2.48 2.44 2.40 2.36 2.32 2.29 2.25 2.22 2.18 2.15 2.12 2.09 2.06 2.03 2.00 1.98 1.95 1.93

78 2.80 2.74 2.69 2.65 2.60 2.56 2.51 2.47 2.43 2.39 2.35 2.32 2.28 2.25 2.21 2.18 2.15 2.12 2.09 2.06 2.03 2.00 1.98 1.95

79 2.83 2.78 2.73 2.68 2.63 2.59 2.54 2.50 2.46 2.42 2.38 2.35 2.31 2.27 2.24 2.21 2.18 2.14 2.11 2.08 2.06 2.03 2.00 1.98

80 2.87 2.81 2.76 2.71 2.67 2.62 2.58 2.53 2.49 2.45 2.41 2.38 2.34 2.30 2.27 2.24 2.20 2.17 2.14 2.11 2.08 2.05 2.03 2.00

81 2.90 2.85 2.80 2.75 2.70 2.65 2.61 2.57 2.52 2.48 2.44 2.40 2.37 2.33 2.30 2.26 2.23 2.20 2.17 2.14 2.11 2.08 2.05 2.03

82 2.94 2.89 2.83 2.78 2.73 2.69 2.64 2.60 2.55 2.51 2.47 2.43 2.40 2.36 2.33 2.29 2.26 2.23 2.19 2.16 2.13 2.11 2.08 2.05

83 2.98 2.92 2.87 2.82 2.77 2.72 2.67 2.63 2.59 2.54 2.50 2.46 2.43 2.39 2.35 2.32 2.29 2.25 2.22 2.19 2.16 2.13 2.10 2.08

84 3.01 2.96 2.90 2.85 2.80 2.75 2.71 2.66 2.62 2.57 2.53 2.49 2.46 2.42 2.38 2.35 2.31 2.28 2.25 2.22 2.19 2.16 2.13 2.10

85 3.05 2.99 2.94 2.88 2.83 2.78 2.74 2.69 2.65 2.60 2.56 2.52 2.48 2.45 2.41 2.38 2.34 2.31 2.27 2.24 2.21 2.18 2.15 2.13

86 3.08 3.03 2.97 2.92 2.87 2.82 2.77 2.72 2.68 2.64 2.59 2.55 2.51 2.48 2.44 2.40 2.37 2.33 2.30 2.27 2.24 2.21 2.18 2.15

87 3.12 3.06 3.01 2.95 2.90 2.85 2.80 2.76 2.71 2.67 2.62 2.58 2.54 2.50 2.47 2.43 2.40 2.36 2.33 2.30 2.26 2.23 2.20 2.18

88 3.15 3.10 3.04 2.99 2.93 2.88 2.83 2.79 2.74 2.70 2.65 2.61 2.57 2.53 2.50 2.46 2.42 2.39 2.35 2.32 2.29 2.26 2.23 2.20

89 3.19 3.13 3.07 3.02 2.97 2.92 2.87 2.82 2.77 2.73 2.68 2.64 2.60 2.56 2.52 2.49 2.45 2.42 2.38 2.35 2.32 2.29 2.25 2.23

90 3.23 3.17 3.11 3.05 3.00 2.95 2.90 2.85 2.80 2.76 2.71 2.67 2.63 2.59 2.55 2.51 2.48 2.44 2.41 2.38 2.34 2.31 2.28 2.25

91 3.26 3.20 3.14 3.09 3.03 2.98 2.93 2.88 2.83 2.79 2.74 2.70 2.66 2.62 2.58 2.54 2.51 2.47 2.44 2.40 2.37 2.34 2.31 2.28

92 3.30 3.24 3.18 3.12 3.07 3.01 2.96 2.91 2.87 2.82 2.77 2.73 2.69 2.65 2.61 2.57 2.53 2.50 2.46 2.43 2.39 2.36 2.33 2.30

93 3.33 3.27 3.21 3.16 3.10 3.05 2.99 2.95 2.90 2.85 2.80 2.76 2.72 2.68 2.64 2.60 2.56 2.52 2.49 2.45 2.42 2.39 2.36 2.33

94 3.37 3.31 3.25 3.19 3.13 3.08 3.03 2.98 2.93 2.88 2.83 2.79 2.75 2.71 2.67 2.63 2.59 2.55 2.52 2.48 2.45 2.41 2.38 2.35

95 3.41 3.34 3.28 3.22 3.17 3.11 3.06 3.01 2.96 2.91 2.87 2.82 2.78 2.73 2.69 2.65 2.62 2.58 2.54 2.51 2.47 2.44 2.41 2.38

20 38 1.90

Xpress Xpresso M1 (64Pitch-Spur Gear 95T~69T)

Spur Gear

Pinion Gear

Belt Pully =

Differential Pully=

Internal Gear Ratio =

Page 20

Strong

☐

Name:____________________ Date:_______________ City / Country: __________ Race: ________________ Track: _____________ Temperature Track: ______

Temperature Air: _______ Track Surface: ☐Carpet ☐Asphalt Track Layout: ☐Technical ☐Mixed ☐Fast

Best Lap: __________

Total Time__________Lap______

Memo:

Transmission

Differential Oil : ________________________

Gear Differential

: ☐

or Locker :

☐

Gear Ratio

Power Motor : ____________Esc : _____________

Batteries : ___________________________

Oil Weight : ___________________________

Pinion/ T:_______ Spur Gear/ T:_______

(Shaft Pulley : 38T / Diff. Pulley: 20T = 1.9 Internal Gear Ratio)

Front Suspension Rear

Shock Oil

Rebound

Spring

Piston

Foam Insert

Anti-Roll Bar

Front Wheel / Tires Rear

Tires

Additive Timing

Inserts

Treated Area

Body: ____________ Wing: ______________

Other

SpurGear

Pinion

x 1.9 = Finial Drive Ratio: ____:1

________

Esc Setting / Memo :

Memo :

Gyro: ______________ Memo :

Memo :

Front Left Front Right Rear Left Rear Right

Memo :

Rear Active Toe In Position Memo:

End Bell Timing: ______________________

Additive

Normal

☐

Front Rear

Cooling Fan: _________________________

SET-UP SHEET

Rear Active Toe In Position

CASTER

SHIM

CAMBER

RIDE HEIGHT

SHIM

HUB

DOWNSTOP

HUB

DOWNSTOP

SHIM

SHIMSHIM

SHIM

TOE DEGREE

Battery Mount Position

STEERING

TOE DEGREE

SHIM

Xpress XPRESSO M1 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual