XPower X-400, X-400A, X-430TF Owner's Manual

X-400 / X-400A / X-430TF / P-400
(115V / 60Hz)

Features:

• Low power draw with an high velocity air flow from 1,600 to 2000 CFM

• Super quiet motor and super lightweight.

• Easy clean filter system.

• Easy carrying handle and stackable up to 4 units high.

• Easy and quick to disassemble for thorough cleaning and service.

• Power cord lengths are 20’.

• Safety screens on open vents.

• 3-speed switch.

• 4 air-flow positions for models (0°, 20°, 45°, 90°).

XPOWER Blower / Fans are intended to move air and to dry
floors, walls, furniture, etc. Durable and easy to operate with
an effective balance of static pressure and airflow, the units
are suitable for a variety of applications.

1. XPOWER Blower / Fans are shipped ready-to-use.
Prior to plugging the unit into the power source, inspect
completely for any shipping damage.

2. Plug the electrical cord into a standard 3-prong outlet.

3. Carefully place the Blower / Fans on a stable, flat dry surface.

4. The unit is capable to be used at 4 different angles to direct
air flow.

5. Turn the switch to desired speed, while making sure unit
operates normally.

6. All Blower / Fans in operation must be supervised at all times.

( Applicable for X-430TF)

Air Movers can
be stacked
(up to 4) on
their sides for
storage.

NOTICE:

1.Stacking feature
is not secure for
transportation.

2.Remove the
filters before
stacking.
(For unit with filters)