XPiQ inc SDS60UD01, SDS60UD01B, SDS60UD01C, SDS60UD01D, SDS60UD04 Datasheet

...
Input
AC Input Voltage 90-264 VAC Input Frequency 47-63 Hz DC Input Voltage 115-280 VDC Inrush Current <15 A at 115 VAC, <30 A at 230 VAC Input Current 1.6 A max at 115 VAC,
1.0 A max at 230 VAC
Output Voltage See Table Output Voltage ±10% V1 only
Adjustment Voltage Accuracy ±2% Switching Frequency • 60khz Output Power 63 Watts, see table Minimum Load 0 minimum for single output models
See table for multiple output models Line Regulation ±1% from low line to high line Load Regulation ±3%, typical, ±5% max on multiple
output models Ripple & Noise ±1% max at low line, full load Transient Response 4% max deviation, 500 µs
recovery time for a 25% load change Temperature ±0.04% per°C
Coefficient Hold Up Time 20ms typical Start Up Time 1 second typical Overvoltage 112% to 132%
Protection Overcurrent 110% to 150%
Protection
General
Efficiency >75% typical Power Density 3.5 W/in3 Switching Frequency • 60 kHz MTBF 100,000 hrs minimum Leakage Current 0.45 mA max at 240 VAC Withstand Voltage 3000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground LED Indicator Green DC OK LED Size 3” x 5.0” x 1.2” Weight 250 grams
Environmental
Operating 0°C to 70°C Temperature Derate from 100% load at 50°C
to 50% at 70°C Cooling Convection cooled Humidity 5% to 95% RH, non-condensing Storage -40°C to +85°C
Temperature
Safety and EMC
Safety Approvals UL1950, CSA C22.2 No 234
EN60950, CE Mark LVD EMI/EMC EN55022 (CISPR 22) Class B
and FCC Part 15
Level B conducted
60 Watts
SDS60 Series
AC/DC Open Frame
Specification
Intelligent Design Quality Product
XPiQ inc.
High Efficiency, Greater than 75%
Universal AC Input
Low 1.20 Inch Profile
Quad Output Versions
Worldwide Safety Approvals
CE Mark for LVD
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
SDS60.qxd 6/6/03 2:55 pm Page 1
Model Output Voltage Output Current Total Regulation Max Output Power
SDS60US03 3.3 VDC 15.1 A 5% 50 W SDS60US05 5.0 VDC 11.0 A 5% 55 W
SDS60US07 7.0 VDC 8.6 A 4% 60 W SDS60US09 9.0 VDC 7.0 A 3% 63 W
SDS60US12 12.0 VDC 5.2 A 3% 63 W SDS60US15 15.0 VDC 4.2 A 3% 63 W
SDS60US19 19.0 VDC 3.3 A 3% 63 W SDS60US24 24.0 VDC 2.6 A 2% 63 W SDS60US30 30.0 VDC 2.1 A 2% 63 W SDS60US36 36.0 VDC 1.8 A 2% 63 W SDS60US48 48.0 VDC 1.3 A 2% 63 W
OUTPUT VOLTAGE & CURRENT RATINGS (SINGLE OUTPUT) SDS60
Model Max Output Output 1 Output 2 Output 3 Output 4
Number Power Vout/Imax Io Min3Vout/Imax Io Min Vout/Imax Io Min Vout/Imax Io Min SDS60UD01 63.0 W 5.0V/7.0 A 0.7 A 12.0V/3.0 A 0.3 A SDS60UD04 48.0 W 3.3V/7.0 A 0.7 A 5.0V/5.0 A 0.5 A SDS60UT00 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A SDS60UT01 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -5.0V/0.8 A 0.0 A SDS60UT02 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A +5.0V/0.8 A 0.0 A
SDS60UT03 53.5 W 3.3V/5.0 A 0.5 A 5.0V/5.0 A 0.5 A +12.0V/1.0 A 0.0 A SDS60UT04 53.5 W 3.3V/5.0 A 0.5 A 5.0V/5.0 A 0.5 A -12.0V/1.0 A 0.0 A SDS60UT05 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A
SDS60UT06 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -5.0V/0.8 A 0.0 A SDS60UT07 63.0 W 5.0V/6.0 A 0.6 A 15.0V/3.0 A 0.3 A -15.0V/0.8 A 0.0 A SDS60UT08 63.0 W 5.0V/6.0 A 0.6 A 24.0V/2.0 A 0.2 A -24.0V/0.5 A 0.0 A SDS60UT09 63.0 W 5.0V/6.0 A 0.6 A 24.0V/2.0 A 0.2 A -12.0V/0.8 A 0.0 A SDS60UT10 63.0 W 5.0V/6.0 A 0.6 A 24.0V/2.0 A 0.2 A +12.0V/0.8 A 0.0 A SDS60UQ00 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A -5.0V/0.8A 0.0 A SDS60UQ01 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A +5.0V/0.8A 0.0 A SDS60UQ02 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A -5.0V/0.8A 0.0 A SDS60UQ03 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A +24.0V/0.8A 0.0 A SDS60UQ04 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A -24.0V/0.8A 0.0 A SDS60UQ05 63.0 W 5.0V/6.0 A 0.6 A 15.0V/3.0 A 0.3 A -15.0V/0.8 A 0.0 A -5.0V/0.8A 0.0 A SDS60UQ06 59.3 W 5.0V/1.0 A 0.1 A 24.0V/1.8 A 0.2 A -15.0V/.01 A 0.0 A +12.0V/0.8A 0.0 A
OUTPUT VOLTAGE & CURRENT RATINGS (MULTIPLE OUTPUT) SDS60
Notes
1. Part numbers in BOLD type are standard stock models, all others are build to order.
2. Other output combinations available, consult factory.
3. 10% minimum load required on V1 & V2 of multi-output units to maintain regulation of ±5%. Regulation increases to ±10% with no load.
4. On multi output units V2 tracks V1, if V1 is adjusted by 5%, V2 changes by 5%.
Mechanical Details - 60 Watts
Notes:
1. Dimensions are shown in inches (mm).
2. Weight: 250gs approx.
3. Input connector mates with Molex 09-50-305 and 2878 series crimp terminal.
4. Output connector mates with Molex housing 09-50-3061 or 09-50-3081 and Molex 2878 series crimp terminal.
Pin 1 2 3 4 5 6 7 8 Single Output Output Output Return Return Return N/A N/A Output 1 1 1 Dual Output OutputOutput Comm Comm N/C N/A N/A Outputs 2 1 1 Triple Output Output Output Comm Comm Output N/A N/A Outputs 2 1 1 3 Quad Output Output Output Comm Comm Output Output Output Outputs 2 1 1 3 4 4
1. Suffix C - Optional 2 pin AC input connector (Open Frame).
2. Suffix B - Optional U-Bracket assembly with 3 pin AC input connector.
3. Suffix D - Optional U-Bracket with Optional 2 pin AC input connector.
Standard product is open frame with a 3 pin AC input connector as shown. The following build to order options are available. Please add the correct suffix to the part number. Consult factory for details and mechanical specifications.
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
SDS60.qxd 6/6/03 2:55 pm Page 2
Loading...