XPiQ inc SDS60UD01, SDS60UD01B, SDS60UD01C, SDS60UD01D, SDS60UD04 Datasheet

•

•

Input

AC Input Voltage • 90-264 VAC
Input Frequency • 47-63 Hz
DC Input Voltage • 115-280 VDC
Inrush Current • <15 A at 115 VAC, <30 A at 230 VAC
Input Current • 1.6 A max at 115 VAC,

1.0 A max at 230 VAC

Output

Output Voltage • See Table
Output Voltage • ±10% V1 only

Adjustment
Voltage Accuracy • ±2%
Switching Frequency • 60khz
Output Power • 63 Watts, see table
Minimum Load • 0 minimum for single output models

See table for multiple output models
Line Regulation • ±1% from low line to high line
Load Regulation • ±3%, typical, ±5% max on multiple

output models
Ripple & Noise • ±1% max at low line, full load
Transient Response • 4% max deviation, 500 µs

recovery time for a 25% load change
Temperature • ±0.04% per°C

Coefficient
Hold Up Time • 20ms typical
Start Up Time • 1 second typical
Overvoltage • 112% to 132%

Protection
Overcurrent • 110% to 150%

Protection

General

Efficiency • >75% typical
Power Density • 3.5 W/in3
Switching Frequency • 60 kHz
MTBF • 100,000 hrs minimum
Leakage Current • 0.45 mA max at 240 VAC
Withstand Voltage • 3000 VAC Input to Output

1500 VAC Input to Ground

500 VAC Output to Ground
LED Indicator • Green DC OK LED
Size • 3” x 5.0” x 1.2”
Weight • 250 grams

Environmental

Operating • 0°C to 70°C
Temperature Derate from 100% load at 50°C

to 50% at 70°C
Cooling • Convection cooled
Humidity • 5% to 95% RH, non-condensing
Storage • -40°C to +85°C

Temperature

Safety and EMC

Safety Approvals • UL1950, CSA C22.2 No 234

EN60950, CE Mark LVD
EMI/EMC • EN55022 (CISPR 22) Class B

and FCC Part 15

Level B conducted

60 Watts

SDS60 Series

AC/DC Open Frame

Specification

•

Intelligent Design Quality Product

XPiQ inc.

High Efficiency, Greater than 75%

•

Universal AC Input

•

Low 1.20 Inch Profile

•

Quad Output Versions

•

Worldwide Safety Approvals

•

CE Mark for LVD

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA

www.XPiQ.com

SDS60.qxd 6/6/03 2:55 pm Page 1

Model Output Voltage Output Current Total Regulation Max Output Power

SDS60US03 3.3 VDC 15.1 A 5% 50 W
SDS60US05 5.0 VDC 11.0 A 5% 55 W

SDS60US07 7.0 VDC 8.6 A 4% 60 W
SDS60US09 9.0 VDC 7.0 A 3% 63 W

SDS60US12 12.0 VDC 5.2 A 3% 63 W
SDS60US15 15.0 VDC 4.2 A 3% 63 W

SDS60US19 19.0 VDC 3.3 A 3% 63 W
SDS60US24 24.0 VDC 2.6 A 2% 63 W
SDS60US30 30.0 VDC 2.1 A 2% 63 W
SDS60US36 36.0 VDC 1.8 A 2% 63 W
SDS60US48 48.0 VDC 1.3 A 2% 63 W

OUTPUT VOLTAGE & CURRENT RATINGS (SINGLE OUTPUT) SDS60

Model Max Output Output 1 Output 2 Output 3 Output 4

Number Power Vout/Imax Io Min3Vout/Imax Io Min Vout/Imax Io Min Vout/Imax Io Min
SDS60UD01 63.0 W 5.0V/7.0 A 0.7 A 12.0V/3.0 A 0.3 A
SDS60UD04 48.0 W 3.3V/7.0 A 0.7 A 5.0V/5.0 A 0.5 A
SDS60UT00 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A
SDS60UT01 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -5.0V/0.8 A 0.0 A
SDS60UT02 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A +5.0V/0.8 A 0.0 A

SDS60UT03 53.5 W 3.3V/5.0 A 0.5 A 5.0V/5.0 A 0.5 A +12.0V/1.0 A 0.0 A
SDS60UT04 53.5 W 3.3V/5.0 A 0.5 A 5.0V/5.0 A 0.5 A -12.0V/1.0 A 0.0 A
SDS60UT05 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A

SDS60UT06 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -5.0V/0.8 A 0.0 A
SDS60UT07 63.0 W 5.0V/6.0 A 0.6 A 15.0V/3.0 A 0.3 A -15.0V/0.8 A 0.0 A
SDS60UT08 63.0 W 5.0V/6.0 A 0.6 A 24.0V/2.0 A 0.2 A -24.0V/0.5 A 0.0 A
SDS60UT09 63.0 W 5.0V/6.0 A 0.6 A 24.0V/2.0 A 0.2 A -12.0V/0.8 A 0.0 A
SDS60UT10 63.0 W 5.0V/6.0 A 0.6 A 24.0V/2.0 A 0.2 A +12.0V/0.8 A 0.0 A
SDS60UQ00 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A -5.0V/0.8A 0.0 A
SDS60UQ01 63.0 W 3.3V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A +5.0V/0.8A 0.0 A
SDS60UQ02 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A -5.0V/0.8A 0.0 A
SDS60UQ03 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A +24.0V/0.8A 0.0 A
SDS60UQ04 63.0 W 5.0V/6.0 A 0.6 A 12.0V/3.0 A 0.3 A -12.0V/0.8 A 0.0 A -24.0V/0.8A 0.0 A
SDS60UQ05 63.0 W 5.0V/6.0 A 0.6 A 15.0V/3.0 A 0.3 A -15.0V/0.8 A 0.0 A -5.0V/0.8A 0.0 A
SDS60UQ06 59.3 W 5.0V/1.0 A 0.1 A 24.0V/1.8 A 0.2 A -15.0V/.01 A 0.0 A +12.0V/0.8A 0.0 A

OUTPUT VOLTAGE & CURRENT RATINGS (MULTIPLE OUTPUT) SDS60

Notes

1. Part numbers in BOLD type are standard stock models, all others are build to order.

2. Other output combinations available, consult factory.

3. 10% minimum load required on V1 & V2 of multi-output units to maintain regulation of ±5%. Regulation increases to ±10% with no load.

4. On multi output units V2 tracks V1, if V1 is adjusted by 5%, V2 changes by 5%.

•

Mechanical Details - 60 Watts

Notes:

1. Dimensions are shown in inches (mm).

2. Weight: 250gs approx.

3. Input connector mates with Molex 09-50-305 and 2878 series
crimp terminal.

4. Output connector mates with Molex housing 09-50-3061 or 09-50-3081
and Molex 2878 series crimp terminal.

Pin 1 2 3 4 5 6 7 8
Single Output Output Output Return Return Return N/A N/A
Output 1 1 1
Dual Output OutputOutput Comm Comm N/C N/A N/A
Outputs 2 1 1
Triple Output Output Output Comm Comm Output N/A N/A
Outputs 2 1 1 3
Quad Output Output Output Comm Comm Output Output Output
Outputs 2 1 1 3 4 4

1. Suffix C - Optional 2 pin AC input connector (Open Frame).

2. Suffix B - Optional U-Bracket assembly with 3 pin AC input connector.

3. Suffix D - Optional U-Bracket with Optional 2 pin AC input connector.

Standard product is open frame with a 3 pin AC input connector as shown.
The following build to order options are available.
Please add the correct suffix to the part number.
Consult factory for details and mechanical specifications.

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA

www.XPiQ.com

SDS60.qxd 6/6/03 2:55 pm Page 2