XPiQ inc NMF0505S, NMF1215S, NMF2405S, NMF2415S, NMF4805S Datasheet

8

DESCRIPTION

The NMF Series is a family of miniature fully regulated isolated DC/DC converters.
Units are available with 5, 12, 24, and 48 VDC inputs and outputs of 5, 9, 12, 12.75,
and 15 VDC. Delivered power is 1 Watt, input to output isolation of 1000 VDC with
units occupying only 0.18 square inches of board space.

The NMF0512S and NMF0513S are specifically designed for use with flash memory.
A control pin is provided for remote in-circuit electrical erasure and reprogramming of
flash memory devices.

5VDC 100mA NMF0505S NMF1205S NMF2405S NMF4805S
9VDC 100mA NMF0509S NMF1209S NMF2409S NMF4809S

12VDC 83mA NMF0512S NMF1212S NMF2412S NMF4805S

12.75VDC 78mA NMF0513S
15VDC 67mA NMF0515S NMF1215S NMF2415S NMF4815S

MODELS CHART

NMF SERIES

1 WATT

Flash Memory Programming

SHOWN
ACTUAL
SIZE

DC/DC Converters

OUTPUT OUTPUT PART NUMBERS

VOLTAGE(S) CURRENT(S) 5VDC INPUT 12VDC INPUT 24VDC INPUT 48VDC INPUT

FEATURES

• Remote Flash Programming • 1000 VDC Isolation

• 0.18 in

2

Board Space • 5, 9, 12, 12.75, and 15 VDC Outputs

• Fully Regulated Outputs • 100% Tested/Burned-In

• 5, 12, 24, and 48 VDC Inputs • Surface Mount Available

260 Hopping Brook Road

Holliston, Massachusetts 01746

Tel. [phone] Fax [phone]

http://www.intlpower.com

International

Power Sources, Inc.

ELECTRICAL SPECIFICATIONS

DIMENSIONS AND CONNECTIONS

TYPICAL APPLICATIONS

9

Input voltage range ±5%
Input reflected noise (20MHz BW) 40mV p-p

Output voltage accuracy ±5%
Line regulation (10% to 100% Load) .25%/1% of Vin
Load regulation (10% to 100% Load) 1.5% max.
Output ripple and noise (20 MHz BW) 60mV p-p max.
Efficiency at full load, 9V, 12V and 15V outputs 62% typical, 55% min.
Efficiency at full load, 5V output 50% typical, 45% min.
Total output power (any output) 1 Watt
Short circuit protection Indefinite

Switching frequency 100 KHz
Input output isolation 1000VDC (1000 megohms) min.
Temperature coefficient 0.03% per °C max.
Operating temperature range -50°C to 125°C

0°C to 70°C (no derating)

Storage temperature range -55°C to 125°C

All specifications typical at nominal line, full load and 25°C

* 24 & 48 VDC Input 0.300 MAX. Pins .01 x .02 inches

Dimensions in inches.
Specifications subject to change.
Unit requires 10mm of air space.