XPiQ inc NME0505S, NME0512S, NME0515D, NME1215D, NME4805S Datasheet

4

ELECTRICAL SPECIFICATIONS

All specifications typical at nominal line, full load and 25°C

NME SERIES

1 WATT

SHOWN
ACTUAL
SIZE

DC/DC Converters

5VDC 200mA NME0505 NME1205 NME2405 NME4805

9VDC 110mA NME0509 NME1209 NME2409 NME4809
12VDC 84mA NME0512 NME1212 NME2412 NME4812
15VDC 67mA NME0515 NME1215 NME2415 NME4815

MODELS CHART

OUTPUT OUTPUT PART NUMBERS

VOLTAGE CURRENTS 5VDC INPUT 12VDC INPUT 24VDC INPUT 48VDC INPUT

Add suffix “S” for single-in-line package, suffix “D” for dual-in-line package.

Input voltage range ±10%
Input reflected noise (20MHz BW) 90mV p-p

Output voltage accuracy ±5%
Line regulation (10% to 100% Load) 1.2%/1% of Vin
Load regulation (10% to 100% Load) ±10%
Output ripple and noise (20 MHz BW) 150mV p-p max.
Efficiency at full load, 9V, 12V and 15V outputs 75% typical, 70% min.
Efficiency at full load, 5V outputs 70% typical, 65% min.
Short circuit protection 1 second max.

Switching frequency 100 KHz
Input output isolation 1000VDC (1000 megohms) min.
Temperature coefficient 0.03% per °C max.
Operating temperature range, 5V and 12V inputs –40°C to 85°C (no derating)
Operating temperature range, 24V and 48V inputs 0°C to 70°C (no derating)
Storage temperature range –55°C to 150°C

Specifications subject to change. Unit requires 10mm of air space.

FEATURES

• 0.12 in2board space • 5, 12, 24 and 48 VDC Inputs

• 75% Efficiency • SIP and DIL Packages

• 22 Watts per in

3

• 1000 VDC Isolation

260 Hopping Brook Road

Holliston, Massachusetts 01746

Tel. [phone] Fax [phone]

http://www.intlpower.com

International

Power Sources, Inc.

PIN CONNECTIONS

OUTPUT CHARACTERISTICS

MECHANICAL SPECIFICATIONS

5

5 VOLT INPUT MODELS

12 VOLT INPUT MODELS