XPiQ inc JPM120PS13R, JPM120PS13, JPM120PS12R, JPM120PS12, JPM120PS07 Datasheet
...
•
•
Input
AC Input Voltage • 85-264 VAC
Input Frequency • 47-63 Hz
DC Input Voltage • 120-370 VDC
Power Factor • 0.98 at 115 VAC, 0.96 at 230 VAC
Input Current • 2.2 A max at 115 VAC
Inrush Current • 40 A at 230 VAC cold start
Start-Up time • 600 ms
Rise Time • 30 ms
Output
Output Voltage • 3.3 V to 48 V single outputs
Output Power • 120 Watts, see table
Output Voltage • +10%, -5%
Adjustment
Minimum Load • 0 minimum load required
Tolerance • ±2% max
Line Regulation • ±0.5%
Load Regulation • ±1% max, see table
Ripple & Noise • 100mV typical, see table
Transient Response • 5% max deviation, 500 µs
recovery time for a 50% load change
Temperature • 0.05%/°C
Coefficient
Hold Up Time • 20 ms minimum at 230 VAC
Overvoltage • 110-135 %
Protection
Overcurrent • 140-170%, constant current
Protection auto restart
General
Efficiency • See Table
MTBF • 100,000 hrs min
Leakage Current • <2 mA at 240 VAC
Isolation Voltage • 3000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground
Size • 199 x 99 x 50 mm
Weight • 750 grams
Environmental
Operating • -10 °C to +50 °C
Temperature (see derating curves)
Cooling • Convection cooled
Humidity • 20-90% RH non condensing
Storage • -20 °C to +85 °C
Temperature
Shock & Vibration • 10-500 Hz 2G 10 min/cycle
for 60 min each axis
Safety and EMC
Safety • UL1950, CSA C22.2 No 950
per cUL EN60950, CE Mark LVD
EMI/EMC • Meets EN61000-3-2, -3, ENV50204,
CISPR22 (EN55022) Class B
Immunity & Surge • Meets EN61000-4-2, -3, -4,
-5, -6, -8, -11
120 Watts
JPM120 Series
AC/DC Industrial Type
Specification
•
Intelligent Design Quality Product
XPiQ inc.
CE Marked LVD
•
Low Cost
•
High Reliability
•
Power Factor Corrected
•
Low Ripple Noise
•
Adjustable Output
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Output Output Output Ripple & Noise Load Regulation Efficiency Model
Voltage Current Power
(1)
(Pk-Pk) Number
(2,3)
3.3 V 24.0 A 79 W 100 mV ±1.0% 67% JPM120PS03
5.0 V 24.0 A 120 W 100 mV ±1.0% 75% JPM120PS05
7.5 V 16.0 A 120 W 100 mV ±1.0% 79% JPM120PS07
12.0 V 10.0 A 120 W 100 mV ±0.5% 80% JPM120PS12
13.5 V 8.9 A 120 W 100 mV ±0.5% 80% JPM120PS13
15.0 V 8.0 A 120 W 100 mV ±0.5% 81% JPM120PS15
24.0 V 5.0 A 120 W 150 mV ±0.5% 83% JPM120PS24
27.0 V 4.4 A 120 W 150 mV ±0.5% 84% JPM120PS27
48.0 V 2.5 A 120 W 250 mV ±0.5 % 84% JPM120PS48
Mechanical Details - 120 Watts
Derating Graph 120 Watts
Dimensions (mm)
TERMINAL Pin No.Assignment
PIN 1,2: AC Input
Pin 3: FG
Pin 4,5: DC Output -V
Pin 6,7: DC Output +V
Weight: approx 750 grams
Notes
1. Max output increases to 125% of rated power when input voltage is between 180 VAC to 264 VAC and ambient temperature is less than 40°C convection
cooled or 47°C with 18°CFM airflow.
2. Part numbers in bold type are standard stock models, all others are build to order.
3 For optional Remote On/Off, add suffix “R” to part number. Example: JPM120PS03R On=3~15VDC, Off=<3VDC
•
OUTPUT VOLTAGE & CURRENT RATINGS JPM120
Optional Mounting
Tabs in 4 places.
Consult factory for
details
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Loading...