XPiQ inc IMP30-10, IMP30-18, IMP30-17, IMP30-16, IMP30-14 Datasheet

...
4000 VAC Isolation
Low Safety Leakage Current
100% Burn-in
Meets Medical EMI Requirements
Optional On/Off Switch
Input Surge Current Protection
Both Line and Neutral Fused for
Specification
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xp-iq.com
Holliston, MA 01746 USA
www.XP-iQ.com
Intelligent Design Quality Product
XPiQ inc.
Input
Input Voltage 85-264 VAC Input Frequency 47 to 63 Hz Inrush Current 30 A @ 230 VAC cold start maximum Efficiency 65% min on 5V and 7V models
70% min on all others
Output
Output Voltage See Tables Hold Up Time 20 msec at 115 VAC Line Regulation ±0.5% max at full load Ripple & Noise 1% pk-pk max Transient Response 4% max recovering to within 1%
of nominal in 500 µs for a 25% load step
General
Overvoltage Output voltage 112-132% Protection of nominal
Overcurrent Protected to short circuit conditions Protection
Isolation Input to Output 4000 VAC
Input to Ground 1500 VAC Output to Ground 500 VAC
MTBF 100,000 hrs (MIL-HDBK-217D)
300,000 hrs - 30 Watt model only (MIL-HDBK-217F)
Environmental
Operating 0°C to +70°C Temperature (derate linearly from full load to
half load from 50°C to 70°C)
Storage -40°C to +85°C Temperature
Humidity 5-95% non condensing Switching Frequency • 60-75 KHz
Safety and EMC
Safety Approvals UL2601-1, CSA 22.2 No. 601.1 per cUL
as cUL, IEC 601-1, EN60601-1 non-patient connected
EMC
EN55011 (CISPR11) class B FCC class B
30 Watts
IMP30 Series
Medical Switching Power Supply
IMP30 26/4/02 2:33 pm Page 1
Mechanical Details
OUTPUT VOLTAGE & CURRENT RATINGS IMP 30
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xp-iq.com
Holliston, MA 01746 USA
www.XP-iQ.com
Output Output Voltage Output Current Output Model
Power Nominal Minimum Maximum Tolerance Number
25 W 5 V 0.00 A 5.00 A 5% IMP30-10 27 W 7 V 0.00 A 3.80 A 5% IMP30-10-1 30 W 10 V 0.00 A 3.00 A 2% IMP30-11 30 W 12 V 0.00 A 2.50 A 2% IMP30-12 30 W 15 V 0.00 A 2.00 A 2% IMP30-13 30 W 18 V 0.00 A 1.70 A 2% IMP30-13-1 30 W 24 V 0.00 A 1.30 A 2% IMP30-14 30 W 30 V 0.00 A 1.00 A 2% IMP30-16 30 W 36 V 0.00 A 0.83 A 2% IMP30-17 30 W 48 V 0.00 A 0.63 A 2% IMP30-18
PIN CONNECTIONS
Pin Function
1 Return 2 Return 3 Output 4 Return 5 Output
NOTES:
1. For optional switch add suffix ‘S’ to model number.
2. Dimensions shown in inches (mm). Tolerance 0.02 (0.5) max.
3. Optional output connectors available, consult factory
4. Weight 1.3 lbs (0.6kgs) approx
IMP30 26/4/02 2:34 pm Page 2
Loading...