XPiQ inc IFC200-45C, IFC200-45B, IFC200-44C, IFC200-44B, IFC200-41C Datasheet

•

•

Input

Input Voltage • 90-264 VAC
Input Frequency • 47 to 63 Hz
Inrush Current • 20 A at 115 VAC or 40 A at 230 VAC
Power Factor • >0.95 typical

Output

Output Voltage • See Table (accuracy ±2% output

1, ±4% others)
Hold up Time • 12 msec min at 110 VAC
Line Regulation • ±0.5% max
Ripple & Noise • 2% pk-pk max
Transient Response • <4% deviation for 25% load change,

recovery <500 µs

General

Overvoltage • Output 1 only 112-132% of nominal
Protection

Overcurrent • All outputs protected to short
Protection circuit conditions

Efficiency • 70% min

Environmental

Operating • 0°C to +70°C
Temperature (derate linearly from

100% at 50°C to 50% at 70°C)

Storage • -40°C to +85°C
Temperature

Temperature • 0.04%/°C
Coefficient

MTBF • 300,000 hrs MIL-HDBK-217F

Safety and EMC

Safety Approvals • UL1950, CSA C22.2 No. 950,

IEC950 (EN60950)

EMC •

CISPR 22 (EN55022) level B,
FCC 20780 class B
EN61000-3-2, -3 compliant

200 Watts

IFC200 Series

AC/DC U-Channel

Specification

•

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA

www.XPiQ.com

Intelligent Design Quality Product

XPiQ inc.

CE Marked LVD

•

Universal Input

•

Power Factor Corrected

•

Optional Fan & Cover

•

Power Fail Signal

•

Single & Multi Outputs

•

Floating 4th Output

•

EN61000-3-2 -3 Compliant

OUTPUT VOLTAGE & CURRENT RATINGS IFC200

Mechanical Details

Notes

1. Add suffix "B" for U-bracket or "C" for enclosed i.e. IFC200-45C.

2. On Output #2 peak current is 12A on +12V, 9A on +15 V and 6A on +24V.

3. Output #4 is floating. It can be connected externally for positive or negative output.

4. 200 watts for "C" version with a cover-and-fan assembly. 150 watts for "B" version without moving air
(maximum current of output #1 & #2 derated to 70%), or 200 watts with 25 CFM forced air provided by user.

•

Output #1 Output #2 Output #3 Output #4 Model

Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Number

5 V 3.0 A 40.0 A 2% IFC200-10
12 V 1.2 A 16.7 A 2% IFC200-12
15 V 1.0 A 13.4 A 2% IFC200-13
24 V 0.6 A 8.4 A 2% IFC200-14
30 V 0.5 A 6.7 A 2% IFC200-16
48 V 0.5 A 4.2 A 2% IFC200-18

+5 V 3.0 A 30.0 A 2% +12 V 0 A 8 A 4% IFC200-23
+5 V 3.0 A 30.0 A 2% +15 V 0 A 6 A 4% IFC200-24
+5 V 3.0 A 30.0 A 2% +24 V 0 A 4 A 4% IFC200-25
+5 V 3.0 A 30.0 A 2% +12 V 0 A 8 A 4% -5 V 0 A 6 A 4% IFC200-30
+5 V 3.0 A 30.0 A 2% +12 V 0 A 8 A 4% -12 V 0 A 4 A 4% IFC200-31
+5 V 3.0 A 30.0 A 2% +15 V 0 A 6 A 4% -15 V 0 A 4 A 4% IFC200-32
+5 V 3.0 A 30.0 A 2% +15 V 0 A 6 A 4% -12 V 0 A 4 A 4% IFC200-33
+5 V 3.0 A 30.0 A 2% +12 V 0 A 8 A 4% -12 V 0 A 4 A 4% F 5 V 0 A 6 A 4% IFC200-40
+5 V 3.0 A 30.0 A 2% +15 V 0 A 6 A 4% -15 V 0 A 4 A 4% F 24 V 0 A 4 A 4% IFC200-41
+5 V 3.0 A 30.0 A 2% +12 V 0 A 8 A 4% -12 V 0 A 4 A 4% F 12 V 0 A 4 A 4% IFC200-42
+5 V 3.0 A 30.0 A 2% +12 V 0 A 8 A 4% -15 V 0 A 4 A 4% F 15 V 0 A 4 A 4% IFC200-44
+5 V 3.0 A 30.0 A 2% +12 V 0 A 8 A 4% -12 V 0 A 4 A 4% F 24 V 0 A 4 A 4% IFC200-45

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA

www.XPiQ.com

Rev 1.0

NOTES:

1. Dimensions in inches (mm).

2. Tolerance 0.02 (0.5) max.

3. Input connector P1 is Beau Inc. part no. 72-5-03C with
#6-32 screws.

4. Main output studs HS7 and HS8 use M5 x 0.8 screws.

5. P3 mates with Molex housing 22-01-1043 and Molex 40455

series crimp terminals.

6. P4 for DC fan rated 24V/0.12A for models IFC200-14, IFC200-

16, IFC200-25) or 12V/0.22A for other models.

7. Weight: 1.25 Kgs approx. for B version, 1.5 Kgs approx.

for C version.

8. P2 Connector is Beau 72-5-09C with 0.375” centers

P1
1 - Line
2 - Neutral
3 - Ground

Model PIN 1, 2 3, 4, 5 6 7 8 9 1 2 3 4

IFC200-10, IFC200-12 -SENSE COM OUTPUT OUTPUT OUTPUT +SENSE P.F.D. COM. COM. FAN
IFC200-13, IFC200-14 RET. #1 #1 #1 RET. RET.
IFC200-16, IFC200-18

IFC200-23, IFC200-24 OUTPUT COM. OUTPUT N.C. N.C. N. C. P.F.D. COM. COM. FAN
IFC200-25 #1 RET. #2 RET. RET.

IFC200-30, IFC200-31 OUTPUT COM. OUTPUT OUTPUT N.C. N.C. P.F.D. COM. COM.
IFC200-32, IFC200-33 #1 RET. #2 #3 RET. RET.

FAN

IFC200-40, IFC200-41 OUTPUT COM. OUTPUT OUTPUT OUTPUT OUTPUT P.F.D. COM. COM. FAN
IFC200-42, IFC200-44 #1 RET. #2 #3 #4 #4 RET. RET.
IFC200-45 RETURN

Pin Chart

P2

P3