Xone 43C Quick Start Guide

XONE:K SERIES CONTROLLERS

The XONE:43C includes X:LINK allowing you to expand your
setup by connecting directly to the XONE:K Series MIDI Con­trollers.

X:LINK uses a standard RJ45 connector and distributes power
and MIDI data, without using additional USB ports.

Connecting a XONE:K Series Controller

Using the RJ45 patch lead supplied with the XONE:K Se­ries controller, connect the RJ45 cable to the X:LINK
OUT socket of the controller.

Connect the RJ45 cable to the X:LINK socket
of the XONE:43C mixer.

Download the K: Series User Guides from:
http://www.allen-heath.com/

XONE:43C Serato Compatibility Quick Start Guide AP9969 Issue 1

Copyright © 2015 Allen & Heath Limited. All rights reserved

http://www.allen-heath.com

SERATO COMPATIBILITY

QUICK START GUIDE

Publication AP9969

OVERVIEW

Thank you for purchasing the Allen & Heath XONE:43C DJ Mixer including
four stereo dual input channels, a Mic/Aux input channel, 45mm linear VCA
channel faders, XONE VCF filter, and X:FX external effects loop for send/
return functionality with wet/dry control.

SERATO

The XONE:43C DJ Mixer features Serato DJ support. Users wanting to take
advantage of this are required to purchase Serato DJ Club Kit available at:

http://serato.com/dj/clubkit

Serato Control Vinyl & CD

Vinyl is available from most DJ retailers and the Serato
Store in a variety of colours and collectors pressings:
http://store.serato.com/

You can burn your own Serato Control CDs or use the Control Signal .wav
file directly from a removable storage device.

Download: http://serato.com/controlcd/

Choosing DVS or Control CD with Serato DJ

The XONE:43C DJ Mixer includes on the rear panel four USB Line / Phono
select switches for easy user selection between Control vinyl or CD per in­put channel .

With your computer connected via USB to the XONE:43C, connect your
turntables / CD Media players to the Phono / Line inputs.

On the channel input that
has the turntable or CD Me­dia player connected, select
the appropriate USB select
switch for Phono or Line.

On the top panel, find the corresponding music channel and select the input
selector switch to USB (middle position).

CONNECTING XONE:43C

To connect the XONE:43C to a computer, download and install the latest
drivers for your computers operating system from our website:

http://www.allen-heath.com/xone43cdrivers

Connect the XONE:43C to your computer using the supplied type A-B USB
Lead.

OS X

The XONE:43C is class compliant on a Mac, however we strongly recom­mend using the dedicated driver for improved performance.

Windows

The XONE:43C with Windows computers requires a dedicated driver.

Serato DJ

Navigate to the 'Setup' screen in Serato
DJ.

1. Click 'Expansion Packs'

2. Click ‘Vinyl/CDJ Control’ to check
this is enabled

3. You are now ready to use CD
players or turntables with the
XONE:43C Mixer.