XO boats CRUISER Owner's Manual

XO CRUISER
WWW.XOBOATS.FI
3
PREFACE
Congratulations on your new Finnish XO boat! We want to thank you for choosing XO and we hope you enjoy the time you spend aboard.
Please read the manual carefully and familiarize yourself with the boat before using it. Naturally, you cannot learn the skills of seamanship and safe boating by reading a User Manual.
If this XO is your first boat, or if you are changing to a type of boat you are not familiar with, for your own comfort and safety please ensure that you obtain handling and operating experience before assuming command of your boat. Your dealer, boating clubs and national sailing
and yacht federations will be pleased to advise you of local boating schools and competent instructors.
Make sure that your boat’s design category is appro­priate for the expected wind and wave conditions and that you and your crew are capable of handling the boat in such conditions. The wind and wave conditions specified for design category C may include gales and high winds, with risk of exceptional waves and gusts. Such conditions are dangerous and can be suciently handled only by a competent and fit crew in a well-main­tained boat. This User Manual is not a detailed main­tenance or troubleshooting guide. If a problem occurs, please contact your XO dealer. If a repair is required, use only the companies recommended by your XO dealer.
KEEP THIS MANUAL IN A SAFE PLACE AND HAND IT OVER TO THE NEXT OWNER IF YOU SELL THIS BOAT.
XO BOATS
4
TABLE OF CONTENT
Sisältö
XO BOATS ........................................................................3
1 BEFORE DEPARTURE ................................................ 7
1.1 WEATHER AND WEATHER FORECAST ...................... 7
1.2 LOAD CAPACITY .........................................................................7
1.3 PASSENGERS ............................................................................. 7
1.4 FUEL .................................................................................................. 7
1.5 ENGINE AND EQUIPMENT .................................................. 7
1.6 VENTILATION ............................................................................... 7
1.7 NAUTICAL CHARTS ................................................................. 7
1.8 DEPARTURE PROCEDURES .............................................. 7
2 GENERAL ...................................................................8
3 WARRANTY ...............................................................9
3.1 BEFORE USING YOUR BOAT ............................................. 9
3.1.1 REGISTRATION ......................................................................................9
3.1.2 INSURANCE ............................................................................................9
3.1.3 TRAINING ..................................................................................................9
4 BOAT CHARACTERISTICS ...................................... 10
4.1 PRINCIPAL BOAT DATA ....................................................... 10
4.2 MAIN DIMENSIONS AND CAPACITY .............................11
4.2.1 BUILDER’S PLATE .............................................................................. 11
4.3 MAXIMUM RECOMMENDED NUMBER OF
PERSONS....................................................................................................11
4.4 LOAD CAPACITY CATEGORY C ....................................... 12
4.5 ENGINE AND PROPELLER ................................................ 13
4.6 DRAINING SYSTEMS ............................................................13
4.7 BILGE PUMPS AND DRAINAGE ..................................... 14
4.8 STABILITY AND BUOYANCY .............................................16
4.9 HATCHES AND SEA-COCKS............................................16
5 SAFETY .................................................................... 18
5.1 MINIMIZING RISK OF FIRE AND EXPLOSION ....... 18
5.1.1 RESPONSIBILITY OF BOAT OWNER/OPERATOR ........ 18
5.2 FIRE EXTINGUISHER ............................................................ 19
5.2.1 SERVICING OF FIRE-FIGHTING EQUIPMENT ................. 19
5.3 GENERAL SAFETY DIAGRAM .........................................20
5.4 LIFE RAFT STORAGE ............................................................ 21
5.4.1 USE OF LIFE RAFT .............................................................................21
6 ELECTRICAL SYSTEM .............................................22
6.1 12 V DC SYSTEMS ................................................................. 22
6.1.1 BATTERIES ...........................................................................................23
6.2 NAVIOP LOOP SYSTEM ...................................................... 24
6.2.1 TECHNICAL PLACE MAIN SWITCHES ............................... 25
6.2.2 STEERING CONSOLE´S PANEL ............................................. 25
6.3 FUSES ...........................................................................................26
6.4 DIRECT SUPPLY SWITCHES ..........................................26
6.5 HEAVY DUTY FUSES ............................................................ 27
5
6.6 230 V SYSTEM ........................................................................ 28
6.6.1 SHORE POWER ................................................................................. 28
6.6.2 INVERTER ............................................................................................. 28
6.6.3 GENERATOR ........................................................................................28
7 BOAT HANDLING ..................................................... 31
7.1 HANDLING CHARACTERISTICS ....................................31
7.1.1 DRIVING AT HIGH SPEED .............................................................31
7.2 HANDLING DEVICES ...........................................................32
7.2.1 STEERING CONSOLE’S SWITCH PANEL ..........................33
7.2.2 WINDSCREEN WIPERS ............................................................... 33
7.3 NAVIGATION ..............................................................................34
7.3.1 VISIBILITY FROM THE STEERING POSITION ................. 34
7.4 SAFE OPERATION – OTHER RECOMMENDATIONS
AND INSTRUCTIONS ........................................................................35
7.4.1 PROTECTION FROM FALLING OVERBOARD AND
MEANS OF REBOARDING ............................................................................35
7.4.2 SECURING LOOSE EQUIPMENT ............................................ 35
7.5 ANCHORING, MOORING AND TOWING ...................36
7.6 TRAILERING ...............................................................................38
8 THE BOAT’S DEVICES AND TECHNICAL SYSTEMS 40
8.1 FUEL SYSTEM ........................................................................... 41
8.1.1 FUEL SYSTEM SERVICING AND REFUELLING ............42
8.1.2 FUEL POWERED DEVICES AND VENTILATION ............42
8.2 WATER SYSTEM .....................................................................43
8.2.1 HOT-WATER TANK ...........................................................................43
8.3 SEPTIC SYSTEM .....................................................................44
8.3.1 WC .............................................................................................................44
8.3.2 SHOWER TROUGH ......................................................................... 44
8.4 BOW THRUSTER ....................................................................45
8.5 ANCHOR WINDLASS ...........................................................46
8.6 HEATING ......................................................................................46
8.6.1 HEATER ..................................................................................................46
9 SERVICE, REPAIRS AND WINTER STORAGE .........47
9.1 INSTALLATION OF OPTIONAL EXTRAS ...................48
9.2 RESPECT FOR THE ENVIRONMENT ..........................48
10 APPENDIX 1 TECHNICAL SPECIFICATIONS .......... 49
10.1 TECHNICAL INFORMATION .............................................49
10.2 NOTIFIED BODY ........................................................................51
10.3 CERTIFICATION DATA: ..........................................................51
11 APPENDIX 2 GENERAL REQUIREMENTS ............. 53
12 APPENDIX 3 ENGINE INFORMATION ................... 55
13 APPENDINX 4 ELECTRICAL DIAGRAMS ................57
6
BOAT MODEL: XO CRUISER
Craft identification number - Cin:
Engines make and model:
First name:
Surname:
Domicile:
Year of purchase:
First name:
Surname:
Domicile:
Year of purchase:
First name:
Surname:
Domicile:
Year of purchase:
First name:
Surname:
Domicile:
Year of purchase:
First name:
Surname:
Domicile:
Year of purchase:
First name:
Surname:
Domicile:
Year of purchase:
I Owner IV Owner
II Owner V Owner
III Owner VI Owner
7
Read this User Manual carefully. Before each departure, check at least the following:
1.1 WEATHER AND WEATHER FORECAST
Take the wind, waves and visibility into account. Is your boat’s design category, size and equipment, as well as the skills of the helmsman and crew adequate for the waters you are about to boat?
1.2 LOAD CAPACITY
Do not overload the boat and always distribute the load properly. To avoid diminishing your boat’s stability, do not place heavy items too high up.
1.3 PASSENGERS
Make sure that a life jacket is available for each person on board. Before departure, agree on the tasks to be performed by each person during the outing.
1.4 FUEL
Make sure that there is enough fuel on board, including a sucient reserve in case of bad weather, for example. You should have at least a 20% reserve to allow for the unexpected.
1.5 ENGINE AND EQUIPMENT
Check the operation and condition of steering, electrical
devices and battery, and perform all daily inspection procedures specified in the engine manual. Check the boat’s seaworthiness in general: check the boat for fuel and water leaks, make sure that the necessary safety equipment is on board, etc. Check that the bilge water level is at the minimum.
1.6 VENTILATION
Make sure that the fuel tank compartment is properly ventilated to minimize the risk of fire. Securing of equip­ment Make sure that all items on board are secured so that they remain in place in rough seas and high wind.
1.7 NAUTICAL CHARTS
If you are not fully familiar with the planned route, make sure that you have nautical charts that cover a large enough area.
1.8 DEPARTURE PROCEDURES
Agree with the crew on whose task it is to detach each line, etc. Make sure that the mooring lines or any other lines do not get caught in the propeller during manoev­ring.
1 BEFORE DEPARTURE
8
The purpose of this User Manual is to help you famil­iarize yourself with the characteristics of your new boat. Separate manuals for the equipment installed on the boat are attached and also referred to in a number of sections of this manual. Naturally, you can complement this manual with manuals of any device installed later on. There is also space reserved for your own notes at
the end of this manual. The units used in this manual are in accordance with the SI system. In some cases, however, other units are added in brackets. An exception to the above is the wind force, which is expressed in the Beaufort scale in the Recreational Craft Directive (RCD). In this User Manual the right side of the hull is called/ abbreviated STB and the left side is called Port.
2 GENERAL
DANGER !
Indicates a serious hazard that will most likely result in death or permanent injury unless appropriate precautionary measures are taken.
NOTE !
Indicates a reminder of safe practice or directs atten­tion to a dangerous practice that could result in injury or damage to the boat or its components.
WARNING !
Indicates a hazard that could result in injury or death unless appropriate precautionary measures are taken.
The warnings and precautions in this manual are defined as follows:
9
This boat and the equipment installed by the boat builder are covered by a warranty as specified in detail in the enclosed warranty clause. The engine, trim tabs, compass, any navigation devices and other retrofitted devices are subject to any warranty of their respec­tive manufacturers. Separate warranty cards for these devices and appropriate supplier information are included as an attachment. For other warranty issues, please contact your XO dealer indicated on the front cover.
3.1 BEFORE USING YOUR BOAT
3.1.1 Registration
In many countries, even a small motor boat must be registered. Contact the local authorities for the regis­trtion requirements in your country. To drive a regis­tered boat, one must usually meet the requirements for minimum age and also possibly have a separate boat­driver’s license.
3.1.2 Insurance
Boat insurance can cover for damage when the boat is in use, transported or stored. Remember to check the insurance coverage separately for lifting operations.
Insurance also has an indirect eect on safety at sea: in the event of a serious accident, you can focus fully on the essential – saving lives above all else. More detailed information on various insurance alternatives is avail­able from insurance companies.
3.1.3 Training
There is a lot of boating literature available, and a great deal of beneficial and practical information can also be gained from boating clubs and by attending naviga­tion courses. These can provide a sound basis for your skills, but sureness in handling, navigating, mooring and anchoring the boat is only acquired through practice.
3 WARRANTY
10
This User Manual is not intended to be a comprehensive maintenance guide or repair manual. Instead, the purpose is to help you familiarize yourself with the char­acteristics of your new boat and show you how to use it properly.
4.1 PRINCIPAL BOAT DATA
Principal boat data includes the following: Boat type: XO CRUISER Design category: C Maximum recommended load: 1646 kg See also sections ”Load capacity”
CATEGORY A:
This boat is designed for conditions in which the wind force can exceed 8 on the Beaufort scale and the signifi­cant wave height may exceed 4 m. (see NOTE! 1), and the boat is mostly independent. Extreme climate conditions are not taken into account. Such conditions can occur in long distances, for example when crossing an ocean, or in the proximity of a shore that is unprotected from wind and waves for a distance of hundreds of nautical miles
CATEGORY B:
This boat is designed for conditions in which the wind
force is no higher than 8 on the Beaufort scale and the waves are consistent with the wind force (the signifi­cant wave height 4 m at the most). Such conditions may occur in long distances at open sea, or in the proximity of a shore that is unprotected from wind and waves for a distance of dozens of nautical miles. Such conditions may also occur in freshwater in case of an area large enough for the forming of waves of this size.
CATEGORY C:
The boat is designed for conditions in which the wind force does not exceed 6 on the Beaufort scale (about 14 m/s) and waves are consistent with the wind force (the significant wave height must not exceed 2 m, with occa­sional waves of 4 m maximum). Such conditions can occur in open water on lakes, estuaries, and in coastal­waters in moderate weather.
CATEGORY D:
The boat is designed for conditions in which the wind force does not exceed 4 on the Beaufort scale and waves are consistent with the wind force (the significant wave height must not exceed 0,5 m) Such conditions can occur in freshwater and in coastal waters in decent weather.
4 BOAT CHARACTERISTICS
11
4.2 MAIN DIMENSIONS AND CAPACITY
The length, beam, draught, total weight, etc., and fuel tank capacity of the boat are described in Appendix 1 ‘Technical specifications’.
4.2.1 Builder’s plate
Part of the above information is indicated on the build­er’s plate attached to the boat in the vicinity of the helm station. More detailed information is given in the appropriate sections of this manual. Please note that, for example, the maximum load capacity indicated on the builder’s plate does not include fuel, but the fuel is included in the maximum recommended load specified by the manufacturer.
4.3 MAXIMUM RECOMMENDED NUMBER OF PERSONS
The maximum recommended number of persons on this boat is 10. The designated seating arrangement is shown in Figure 1.
NOTE !
The significant wave height is the average height of the highest third of the waves. This roughly corr­sponds to an experienced observer’s estimate of the wave height. Waves of double this height may occa­sionally be experienced.
WARNING !
Never exceed the maximum recommended load when loading your boat. Always load up the boat carefully and distribute the load properly so that the designed waterline is maintained (approximately on an even keel). Avoid placing heavy weight in a high position.
WARNING !
Do not exceed the maximum recommended number of persons on board. Irrespective of the number of persons on board, the total weight of the persons and equipment must never exceed the maximum recom­mended load (see sections ’’Load capacity’’) . Always use the seats in the boat. If your boat is not equipped with seats for 10 people, the passenger must sit on the sole in the positions indicated in the figures 1.
12
4.4 LOAD CAPACITY CATEGORY C
Weight of the boat without load mLC 4045 kg
The maximum number of persons board: 10 hlö Total weight of all persons 750 kg Personal luggage 49 kg Fresh water 105 kg Fuel 499 kg Septic tank 81 kg Diesel fuel 30 kg Life raft 32 kg Margin for future additions 50 kg Other load of equipment 50 kg Maximum load allowed mL 1646 kg Weight with maximum load mLDC 6461 kg
The unladen weight of the boat includes the engine.The quantity of fluid in the tank reduces the load the boat can carry.
13
4.5 ENGINE AND PROPELLER
The maximum rated engine power is 2 x 350 hv (524 kW). When starting the engine, check that the cooling water flows properly and make sure that the gear is in the neutral position. If the engine starts when the gear is not in neutral, contact your nearest service centre.
4.6 DRAINING SYSTEMS
Draining system type in your craft is so called self-draining deck for rain water and splashing or from breaking waves that allow water to drain through the drain holes in the aft deck.
Your craft aren´t equipped and installed with separate draining holes or sea-cocks. Boat is desgined with draining systems for the purpose of draining the craft during normal driving and docking conditions.
NOTE!
The self-emptying open space is meant for the removal of such water that ends up on the deck through rain, splashing or from breaking waves. A part of the rain water as well as water condensation in the bilge may end up in the bilge. Do not leave the boat unattended in the water for a long time. Observe the floating position of the boat and empty the bilge when necessary. Leaving the boat unattended in the water for a long time may cause damage.
14
4.7 BILGE PUMPS AND DRAINAGE
The boat is equipped with three bilge pumps. The aft of the boat has one electric and one hand-operated bilge pump.
The location of draining devices is shown in Figure . The bilge pumps are positioned as close to the bottom plate as is practically possible. Despite this, it is completely normal that a small amount of water remains in them bilge so that it cannot be discharged by the bilge pump.
The fore bilge pump (1) is positioned in the technical space and can be accessed by opening the service hatch under the cockpit sofa. The electric bilge pumps are equipped with a float which triggers them automatically if there is water in the bilge space. The electric pumps have direct supply switches, which allow the pump to come on even if the power is switched o in the boat. The pumps can also be used manually via the switches (3) on the switchboard.
The boat’s bilge pumps are equipped with an indicator light that notifies the helmsman if any water has accu­mulated in the bilge. The light is connected to the bilge pump, which ensures that it comes on when the pump
switches itself on. The indicator light is positioned in the steering console’s switchboard.
The manual bilge pump (2) is meant to be used in case the electric bilge pump is out of use. The pump can be operated by opening the lid and attaching the separate handle located next to the pump to the bilge pump.
Regularly check all bilge pump inlet and remove any debris.
NOTE!
Regularly check the operation of the bilge pump. If you notice that the bilge pump does not operate properly, remove any debris from the pump inlet and contact your XO dealer if necessary
NOTE!
Check the amount of bilge water by emptying the bilge manually with the spring-loaded switch located on the switch panel every time before use. It is recom­mended to have at least one bucket or bailer on board
15
2
3
1
1
1
Bilge pump 1 Model: Ultima Bilge 1000 Eciency: 64 l/min Function: Automatically and manual
Bilge pump 2 Brand: Whale Model: Urchin PB 9013 25-38 Eciency: 45 l/min (Depending on pumping speed) Function: Manual
WARNING !
The bilge pump system is not designed to deal with a leak resulting from running aground or other damage. Do not close the drain holes when using the boat.
16
4.8 STABILITY AND BUOYANCY
The stability of your XO boat is excellent due to its hull design and weight distribution. However, remember that high breaking waves always represent a serious danger to stability. Also note that the stability of your boat will be compromised if any weight is placed in a high posi­tion. Any changes in the positioning of dierent weights in the boat can have a significant impact on the stability, trim and performance of your boat. If you are planning such changes, please contact the boat manufacturer. The amount of bilge water should be kept at a minimum because freely moving water in the boat always impairs the boat’s stability. Also note that stability can be dimin­ished when towing or being towed.
4.9 HATCHES AND SEA-COCKS
There are several inlets through the boat that include taps for opening and closing the inlets. It is recom­mended to keep these closed if the boat is out of use for a long time, and to open them again when the boat is used again. The taps of the draining systems in the aft and fore decks must be open when the boat is in the water.
It’s recommended to keep the windows, doors, deck hatches and vents shut while driving. However, on occa­sion and depending on the weather they can be kept open. In stormy weather, always keep deck hatches, storage room doors and openings closed to minimize the risk of water getting into the boat.
In certain conditions and speeds it is possible that water is sprayed inside through canopies, hatches or other openings, due to negative pressure or other eects. This can be prevented by closing the canopies, hatches or other openings. The taps and hatches presented in the following picture must be kept shut when under way.
Exact location and function of the sea-cocks (2-4) are shown in the section Septic system.
WARNING !
Front cabin door must be close during driving
17
7
5
4
8 8
9
3
2
1
6
1. Draining holes
- Manual bilge pump draining
- Automatic bilge pump draining
- Shower pump draining
2. Toilet seat water inlet sea-cock
3. Septic tanks seawater sea-cock
4. Generator water inlet sea-cock
5. Storage room of sofa
6. Midstorage box
7. Cabin door
8. Foredeck hatch
9. Boq anchor box hatch
18
5.1 MINIMIZING RISK OF FIRE AND EXPLOSION
If there is a fire in your craft, it usually starts with an explosion. Most common fire sources are the engine and the stove. Fire spreads usually very fast, so extin­guishing the fire mist proceed quickly. Fire should be put down by extinguishing, i.e. stopped the oxygen. Use the fire extinguisher in your craft. The exact location can be found from the General safety diagram. Using water in fuel-based fires does not help.
If the fire starts to get out of control, leave the burning craft to save lives, because if the fire reaches fuel containers, it may cause an explosion and cause even a large area around the boat to burn. Switch the power o when leaving your boat. Fire in the technical place can be extinguish via check hatches which are located front of outboard motors.
Keep the bilge always clean; check it periodically for fuel fumes and oil leakages. Do not drape any curtains or other flammable material near a stove or heater.
We recommend that the owner/user of the boat makes
sure that there is easy access to a fire bucket with a line and fire blanket attached to it on the boat. Place of the blanket is shown General safety diagram. Make sure that the fire extinguishing equipment is easily acces­sible also when the boat is loaded.
Inform all members of the crew are aware of the location and operation of the fire extinguishing equipment. Keep the bilge clear of fuel and check the fuel system for leaks regularly. The smell of fuel is a definite sign of leaking fuel. In case your boat is equipped with a heater, please refer to the heater manufacturer’s instructions for its safety instructions.
5.1.1 Responsibility of boat owner/operator
It is the responsibility of the boat owner/operator to ensure that fire-fighting equipment is readily accessible when the boat is occupied, and to inform members of the crew about
• the location and operation of fire-fighting equipment,
• the location of discharge openings into the engine space, and
• the location of routes and exits that is shown section
5.3
5 SAFETY
Loading...
+ 40 hidden pages