How it Works
XM Satellite Radio
Loading...
XDRC2V1KC
User Manual
61 pgs5.35 Mb0

XM Satellite Radio Xpress RCi, XDRC2V1KC User Manual

Download
Page 1
User Guide
Page 2
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features. . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Safety and Care Information . . . . . . . . . . . . . . . . . 7
What’s in the Box? . . . . . . . . . . . . . . .. . . . . . . . . . . 9
RCi
Functions. . . . . . . . . . .. . . . . . . . . . . . . 10
Remote Control Functions . . . . . . . . . . . . . .. . . . . 11
Control Knob and Select Button Basics. . . . . . . .12
PowerConnect Vehicle Dock. . . . . . . . .. . . . . . . . .13
Vehicle Installation . . . . . . . . . . . . . . . . . . .15
Step 1: Choose a Location for Your Radio . . . . . .16
Step 2: Install the Dash or Vent Mount . . . . . . . 18
Step 3: Mount the Magnetic
Mount Antenna . . . . . . . . . . . . .. . . . . . . . . . . . 22
Step 4: Route the Magnetic Mount
Antenna Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Step 5: Connect the Magnetic Mount Antenna
and PowerConnect Power Adapter. . . . . . . . 39
Step 6: Connect the Audio . . . . . . . . . . . . . . . . . .40
Activation. . . . . . . . . . . . . . . . . . . . . . . . . . .51
RCi
Xpress
. . . . . . . . . . . . . . . . . . . . . . . . . . . 53
The Main Display . . . . . . . . . . . . . . .. . . . . . . . . . . . 54
Navigation Basics . . . . . . . . . . . . . . . . . . . . . . . . . .56
Listening to Satellite Radio. . . . . . . . . . . . . . . . . . 59
FM Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Skip a Channel. . . . . . . . . . .. . . . . . . . . . . . . . . . . . 66
Block xL (Explicit Language) Channels . . . . . . . 67
Special Features. . . . . . . . . . . . . . . . . . . . . 69
Pause and Replay . . . . . . . .. . . . . . . . . . . . . . . . . . 70
TuneSelect . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
GameSelect . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 75
Stock Quotes . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . 78
SongSaver. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .80
Where Else Can You Use Your
RCi
Xpress
Configuring your Xpress
Radio ID. . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .86
Find Available FM Channels in
Your Area . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .87
Turn FM Transmitter On/Off . . . . . . . . . . . . . . . . . 90
Set and Select FM Channels. . . . . . . . . . . . . . . . .92
Set Audio Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Signal Indicator . . . . . . . . . . . . . .. . . . . . . . . . . . . .96
Display Settings. . . . . . . . . . . . . . . . .. . . . . . . . . . . 97
Set Time . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . .99
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Factory Settings . . . . . . . . . . . . . . . . .. . . . . . . . . 104
Demo Mode. . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . 105
? . . . . . . . . . . . . . . . . . . . . . . . . 83
RCi
. . . . . . . . . . . 85
Troubleshooting . . . . . . . . . . . . . . . . . . . . 107
Product Specifications . . . . . . . . . . . . . . . 113
Patent Information . . . . . . . . . . . . . . . . . . . . . . . . .115
Environmental Information. . . . . . . . . . . . . . . . . .115
Owner’s Record . . . .. . . . . . . . . . . . . . . . . . . . . . . .118
3
Page 3
Introduction
4 5
Page 4
Introduction
Features
Congratulations on your purchase of the Xpress
The Xpress experience:
Please read the entire user guide before using your Xpress
6 7
RCi
has these exciting features to enhance your overall listening
• Large vibrant colour display: View artist name, song title, and channel information on a display with stylish colour backgrounds and graphics.
• Split screen display mode: Split the screen to simultaneously view what’s playing on the current channel and up to 3 other channels, or view what’s playing on the current channel and the last channel you were listening to at the same time.
• Improved audio connection options: Use either the included Aux In Cable, or the new PowerConnect technology to receive clear sound through your vehicle’s stereo system.
• Enhanced real-time channel guide: Browse programs, artists, and songs playing on other channels, without having to change the channel you are on.
• Pause and Replay: Pause, rewind, and replay up to 60 minutes of live radio.
• TuneSelect and GameSelect: Don’t miss your favourite artists and songs
when they are on live radio. And view scores and stats of your teams anytime, plus get alerts when they are playing.
• SongSaver: Store up to 10 songs so you can listen to them later.
• Stock Ticker: Track the price and daily movement of your favourite stocks.
RCi
!
i
RC
!
Safety and Care Information
IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or damage to your device. XM Radio Inc. disclaims all responsibility for damage from data loss due to breakdown, repair, or other causes.
• Do not expose to extreme temperatures (above 60˚C or below
-20˚C, or above 140˚F or below -4˚F).
• Do not expose to moisture. Do not use device near or in water.
• Do not let any foreign matter spill into device.
• Do not store in dusty areas.
• Do not expose to chemicals such as benzene and thinners. Do not
use liquid or aerosol cleaners. Clean with a soft damp cloth only.
• Do not expose to direct sunlight for a prolonged period of time, and do not expose to fire, flame, or other heat sources.
• Do not try to disassemble and/or repair device yourself.
• Do not drop your device or subject it to severe impact.
• Do not place heavy objects on device.
• Do not subject device to excessive pressure.
• If the LCD screen is damaged, do not touch the liquid crystal fluid.
Page 5
Introduction
Warning!
What’s in the Box?
• Opening the case may result in electric shock.
• If the liquid crystal fluid comes in contact with your skin, wipe the skin area
with a cloth and then wash the skin thoroughly with soap and running water. If the liquid crystal fluid comes into contact with your eyes, flush the eyes with clean water for at least 15 minutes and seek medical care. If the liquid crystal fluid is ingested, flush your mouth thoroughly with water. Drink large quantities of water, and induce vomiting. Seek medical care.
• Make sure that you insert the PowerConnect Power Adapter all the way into the vehicle’s cigarette lighter or power adapter socket.
• Do not insert several devices into the same power socket.
• Use the PowerConnect Power Adapter and Vehicle Dock away from water
sources to avoid fire or electric shock.
Xpress
RCi
Radio
info
display
menu
fm
direct
+
mute
2
1
3
5
4
6
8
7
9
jump fav
0
Remote Control
Aux In Cable
• Do not touch the device with wet hands.
• When using this product, it is always important to keep your eyes on the
road and hands on the wheel. Not doing so could result in personal injury, death, and/or damage to your device, accessories, and/or to your vehicle or other property.
• Vehicle installation and radio configuration functions should not be
PowerConnect
Vehicle Dock
Dash Mount
Vent Mount
and Extended
Vent Clamps
performed while driving. Park your vehicle in a safe location before beginning installation.
Your device should be placed in your vehicle where it will not interfere with the function of safety features, e.g., deployment of airbags. Failure to correctly place device may result in injury to you or others, if the unit becomes detached during an accident and/or obstructs the deployment of an airbag.
PowerConnect Power Adapter
Magnetic Mount
Antenna
Antenna & Dash Mount
Alcohol Preparation Pads
8 9
Page 6
Introduction
Xpress
Control Knob
Scroll through lists and preview channels; also highlight menu options.
Number Buttons
Select your favourite channels; also enter a channel number directly; also access songs saved in SongSaver.
RCi
Functions
Pause and Replay Buttons
Pause, rewind, and replay up to 60 minutes of live radio.
i
Info Button
View either sports or stock information.
Jump
Switch between current channel and previous channel.
Display
Customize the way you view content on the display.
Power Button
Turn radio on and off.
Select Button
Press to confirm selection for channel and menu items; also press and hold to GameSelect, to TuneSelect, or to save a song.
Left and Right Arrows
Search for channels by category; also when in Replay mode, rewind or fast-forward through content.
Menu Button
Access advanced features and configuration options; also press and hold to access FM presets.
Fav Button
Choose among the different tuning modes: Direct, Favourite Channels, and SongSaver.
Remote Control Functions
Power Button
Turn radio on and off.
Pause and Replay Buttons
Pause, rewind, and replay up to 60 minutes of live radio.
Select Button
Press to confirm selection for channel and menu items; also press and hold to GameSelect, to TuneSelect, or to save a song.
Info Button
View either sports or stock information.
— / FM Button —: Change channels, or
decrease volume for Sound System (sold separately).
FM: Not used in Xpress
Number Buttons
Select your favourite channels; also enter a channel number directly; also access songs saved in SongSaver.
Jump Button
Switch between current channel and previous channel.
RCi
.
info
fm
1
4
7
jump
display
mute
Arrow Buttons
Use up/down arrow buttons to scroll through lists and preview channels; also highlight menu options. Use left/right arrows to search for channels by category; also when in Replay mode, rewind or fast-forward through content.
Display Button
Customize the way you view content on the display.
Menu Button
Access advanced features
menu
direct
+
2
3
5
6
8
9
fav
0
and configuration options; also press and hold to access FM presets.
+ / Direct Button +: Change channels, or
increase volume for Sound System (sold separately). Direct: Not used in
RCi
.
Xpress
Mute Button
Silence live radio, saved songs, and replayed content.
Fav Button
Choose among the different tuning modes: Direct, Favourite Channels, and SongSaver.
10 11
Page 7
Introduction
Control Knob and Select Button Basics
Turn the Control knob clockwise or counter-clockwise
PowerConnect Vehicle Dock
Colour-Coded Connections
to scroll through a list and highlight an item in the list.
The PowerConnect Vehicle Dock has colour-coded connectors to assist you in connecting the cables to the correct connector.
Rear View
Press the center of the Select
button to make a selection.
Press the edge to tilt the Select button to select , , display, or jump.
AUDIO ANT PWR FM
PWR (Red) Connection for PowerConnect Power Adapter.
FM (Blue) Connection for optional FM Direct Adapter (sold separately).
Tilt Right: Tilt Left:
Tilt Up: display Tilt Down: jump
AUDIO (Green) Connection for Aux In Cable or optional Cassette Adapter (sold separately).
ANT (Silver) Connection for the Magnetic Mount Antenna.
12 13
Page 8
Introduction
Wire Guide
The PowerConnect Vehicle Dock has a wire guide at the top rear that can help you to organize the cables and wires connected to the dock. If you need to bring a cable or wire from one side of the dock to the other, utilize the wire guide by looping the cable though the wire guide as shown.
Wire Guide
Vehicle Installation
14 15
Page 9
Vehicle Installation
Option 3
Step 1: Choose a Location for Your Radio
When installing the Xpress
RCi
in your vehicle, choose a location where it will not
Option 3
block your vision, interfere with the controls, or obstruct the air bag. The location
display
should be easily accessible and provide good visibility of the display, and should not be located where it will be in direct sunlight, which will affect the visibility of
A.
A.
u en m
M
F
jump
menu
info
jump
direct
fav
0
0
9
9
8
8
7
7
6
6
5
4
5
3
4
3
2
1
2
1
the display screen.
RCi
Several examples of the Xpress
mounted in a vehicle are shown: A is the on dash
method using the Dash Mount, and B is the vent clip method using the Vent Mount.
Option 4 Option 5
Option 1 Option 2
A.
m enu
FM
jump
1
2
3
4
5
6
7
8
9
0
direct
m
en u
A.
FM
jump
1
2
3
4
5
6
7
8
9
0
direc
t
Option 4 Option 5
B.
B.
m e nu
FM
jump
1
2
3
4
5
6
7
8
9
0
direc
t
display
enu m
FM
jump
menu
info
jump
direct
fav
0
0
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
B.
B.
16 17
Page 10
Knob Adhesive Foot Dock Mounting Plate
Vehicle Installation
Step 2: Install the Dash or Vent Mount
Depending on your situation, you can either choose to use the Dash Mount or the Vent Mount.
IMPORTANT! When you install the chosen mount, do not attach the dock to the mount. All cables should be attached to the dock prior to connecting the dock to the mount.
3 The dock mounting plate can be tilted in different directions.
Adjust as necessary for your particular vehicle. When the orientation is correct, tighten the knob.
Installing the Dash Mount:
CAUTION! The adhesive used on the Dash Mount may be difficult to remove. Do not install this mount on leather surfaces and make sure the air temperature is at least 15ºC (60ºF) during installation.
1 Locate a flat surface for the Dash Mount. Make sure there is ample
room for the PowerConnect Vehicle Dock and Xpress installed.
2 Set the orientation of the Dash Mount before adhering it. Loosen the
knob and adjust the adhesive foot for the location you selected in “Step 1: Choose a Location for Your
I II
Radio” on page 16.
•Option 1 & 3 should be oriented as I.
RCi
Radio when
4 Clean the surface with the
alcohol preparation pad and let it dry thoroughly.
5 Peel off the adhesive liner.
Position, press, and hold the Dash Mount in place for 30 seconds.
IMPORTANT! Once the mount is attached to the dash, let the adhesive cure (dry) for 24 hours before attaching the dock and radio to the mount.
TIP! To remove, carefully lift the adhesive pad with your fingers or a spoon. Warming the pad with a hair dryer for several minutes will help soften the adhesive.
•Option 2 should be oriented as II.
18 19
Page 11
Vehicle Installation
Slide Short Vent Clamps Out
Remove End Cap
Extended Vent Clamps
Installing the Vent Mount:
3 Push the Vent Mount onto the vehicle vent as shown (1) until it
hooks on the rear of the vent louver (2).
1 Locate a vent with horizontal
louvers sturdy enough to hold your PowerConnect Vehicle Dock and radio.
2 If the vent louvers in your vehicle
are recessed, you may need to use
Short Vent
Clamps
the longer vent clamps with the Vent Mount. If so, remove the shorter vent clamps and install the longer ones into the Vent Mount. Be sure to observe the orientation of the vent clamps as shown.
4 Rest the foot against the bottom of the vent (2), and adjust the
tilt of the Vent Mount by repositioning the foot to a different adjustment hole (3).
1 2 3
Dash
HOOKED
Vent
TILT
ADJUSTMENT
HOLES
Dash
PUSH
Foot
Dash
Vent
Louver
To remove the Vent Mount, push the mount into the vent. Then lift up until
Vent
disengaged from the rear of the vent louver, and remove the Vent Mount.
Slide Extended Vent Clamps In Replace End Cap
20 21
Page 12
Vehicle Installation
Step 3: Mount the Magnetic Mount Antenna
The Magnetic Mount Antenna contains a strong magnet which will stick to any metal part of your vehicle, but will not damage the vehicle.
To install the Magnetic Mount Antenna:
1 Choose the best location for your antenna considering
your vehicle type. Pay particular attention to any accessories that you may have like luggage racks and how frequently you may use them.
Sedan/Coupe: We recommend mounting the antenna just above either the front windshield or the back window as shown.
22 23
Magnet
SUV: We recommend mounting the antenna at the rear of the roof as shown.
Convertible: We recommend mounting the antenna at the leading edge of the trunk as shown.
Pickup Truck: We recommend mounting the antenna just above the front windshield as shown.
2 Clean the surface of the selected
mounting location using the alcohol preparation pad and let it dry thoroughly.
Page 13
Vehicle Installation
3 Place the antenna in the location you selected. Follow the Tips and
Cautions shown on the next several pages.
TIP! Mount the antenna on the roof (for most vehicles) or trunk (for convertibles) where it has a clear view of the sky in all directions.
CAUTION! Don’t mount the antenna inside the vehicle, for example, on the dashboard.
CAUTION! Don’t mount the antenna on any of the vehicle’s front, back or side pillars.
CAUTION! Don’t mount the antenna close to a roof rack. Adjust the rack so it’s further away from the antenna or move the antenna closer to the center of the roof.
24 25
Page 14
Vehicle Installation
CAUTION! Don’t mount the antenna close to another antenna. Mount it at least 7.5 cm (3 inches) away.
Step 4: Route the Magnetic Mount Antenna Cable
Before you begin routing the antenna cable, read these general instructions for how to route and hide the antenna cable. Then route your antenna cable according to the instructions which follow for your specific type of vehicle.
Use a blunt plastic putty knife, a credit card,
a plastic knife, or a similar blunt tool to lift the
Feed cable under rubber moulding around window
rubber window moulding
Tuck the cable under the
moulding around the window
26 27
Page 15
Bring cable out of weatherstripping and into trunk
Route cable out from under rear windshield
Route cable through weatherstripping
Vehicle Installation
moulding and tuck into weatherstripping around trunk opening Avoid sharp bends by running cable through weatherstripping for several inches
Pull weatherstripping from trunk opening
Tuck cable into weatherstripping.
several inches to avoid sharp bends
Pull cable out of weatherstripping and route through trunk to cabin
Route cable along trunk wall and into cabin through gap or conduit, along existing wiring harness
Route cable out of window moulding and into weather­stripping around trunk opening
28 29
Route cable along trunk wall and into cabin
Page 16
Vehicle Installation
Use a blunt plastic putty
knife or similar blunt tool
to lift edge of interior
trim and tuck cable
under trim. Continue
towards front of vehicle
Route cable under trim or upholstery
Continue routing cable under trim or carpet towards front of vehicle
Route cable from trunk under interior trim, into cabin and towards front of vehicle
Continue routing cable under carpet or console to radio location
Coil excess Pull carpet or mat back
Bring cable out from trim and route under carpet to dashboard or console
TIP! Always be careful to include enough slack in your cable to accommodate open doors or trunk lids. Use things typically found around the home, like electrical tape, to secure cables in areas so that hinges do not pinch the cable with the door. Hide any excess cable in the trim.
cable under
carpet or mat
Bring cable out from trim
30 31
Page 17
Vehicle Installation
• Sedan/Coupe With Antenna Placed at the Rear of the Roof:
1. Feed the antenna cable from the antenna underneath the rubber molding around the rear window. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the rear window and tuck the antenna cable underneath the molding. Route the antenna cable around and down the window to the lowest point. If your rear window does not have rubber molding, we recommend consulting a professional installer.
2. Route the antenna cable out of the window molding and into the rubber weather stripping around the trunk opening. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. To avoid sharp bends in the cable, run the cable inside the weather stripping for a few inches, then remove the cable from the weather stripping inside the trunk. Keep the cable away from hinges, gears, etc., that could damage it.
3. Route the cable out from the rubber weather stripping and along the trunk wall. Continue routing the cable into the vehicle cabin through a conduit or along an existing wiring harness.
4. Route the cable through the main cabin area under the interior trim, towards the front of the vehicle. Use a blunt plastic putty
32 33
knife or similar blunt tool to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the doors. Airbag locations are marked with “SRS” logos. Be careful not to crimp or cut the cable.
5. Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties (purchased separately).
6. Bring the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock.
7. Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 39.
Page 18
Vehicle Installation
•Sedan/Coupe With Antenna Placed at the Front of the Roof:
1. Feed the antenna cable from the antenna underneath the rubber molding around the windshield. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneath the molding. Route the antenna cable around and down the windshield to the lowest point.
2. At the lowest corner of the windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Run the cable inside of the weather stripping to the bottom of the door opening.
3. Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties.
4. Bring the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock.
34 35
5. Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 39.
•SUV:
1. Feed the antenna cable underneath the rubber weather stripping of the rear tailgate window/door and route the cable along the rear hatch. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Pull the cable out from weather stripping and route it into the cabin under the interior trim. Avoid hinges or gears that could crimp or cut the cable.
2. Route the cable through the SUV’s main cabin area under the interior trim, towards the front of the vehicle. Use a blunt plastic putty knife or similar blunt tool to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the doors. Airbag locations are marked with “SRS” logos. Be careful not to crimp or cut the cable.
3. Bring the cable out from the trim near the front of the cabin and route it under
Page 19
Vehicle Installation
the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties (purchased separately).
4. Bring the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock.
5. Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 39.
•Convertible:
1. Bring the antenna cable from the antenna into the trunk at the front edge of the trunk lid. Keep any bends in the cable loose. Tape or tie the cable along the inside of the trunk lid to the trunk lid hinge strut.
2. Allow enough slack in the cable so the trunk lid can easily open and close and keep the cable away from hinges, gears, etc., that could crimp or cut it. Route the cable along the trunk wall and into the cabin through a conduit or along an existing wiring harness.
3. Route the cable through the main cabin area under the interior trim, towards the front of the vehicle. Use a blunt plastic putty knife or similar blunt tool to lift the plastic trim just enough to tuck the cable
36 37
under underneath. Avoid side airbag locations on back pillars and above the doors. Airbag locations are marked with “SRS” logos. Be careful not to crimp or cut the cable.
4. Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties (purchased separately).
5. Bring the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock.
6. Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 39 .
•Pickup Truck:
1. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneath it.
2. Continue tucking the cable underneath the windshield molding around the windshield to the lowest corner.
3. At the lowest corner of the
Page 20
Vehicle Installation
windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Run the cable inside of the weather stripping to the bottom of the door opening.
4. Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties.
5. Bring the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock.
6. Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 39.
38 39
Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter
1 Plug the Magnetic Mount Antenna
into the silver ANT connector on the PowerConnect Vehicle Dock.
2 Insert the PowerConnect Power Adapter
into your vehicle’s cigarette lighter or power adapter socket.
3 Plug the PowerConnect Power
Adapter into the red PWR connector on the dock.
AUDIO ANT PWR FM OUT
AUDIO ANT PWR FM OUT
Page 21
Vehicle Installation
Step 6: Connect the Audio
To play audio through your vehicle’s stereo or FM radio, decide on one of the following audio connection options:
Option 1: Aux In Cable Installation Instructions
1 Plug one end of the Aux In Cable into the green AUDIO connector
on the dock.
•Option1: Best: Use the Aux In Cable if your vehicle’s stereo system has an auxiliary input connection. Refer to your vehicle’s owners manual to find the location of the auxiliary input jack, or consult the vehicle dealer.
TIP! The auxiliary input jack may be located on the face plate of the vehicle radio, on the back of the radio, anywhere on the front dash panel, inside the glove compartment, or inside the center console in between the front seats.
•Option2: Better: Use a Cassette Adapter if your vehicle has a built- in cassette player. Cassette Adapters are sold separately and can be purchased from an electronics retailer, or go to xmradio.ca/accessories.
RCi
•Option3: Good: Use the PowerConnect feature in the Xpress
.
PowerConnect plays the audio through your vehicle’s FM radio.
•Option4:Best:Use the FM Direct Adapter. If none of the previous three audio connection options will work in your vehicle, then you will need to use the FM Direct Adapter (FMDA) (sold separately). The FMDA needs to be installed by a professional installer and directly connects the Xpress your vehicle’s FM radio.
Follow the installation instructions in the next several sections for the audio connection option that you have selected.
2 Plug the other end
into the auxiliary input jack connection of your vehicle’s stereo system.
3 Insert the dock into the
mount.
RCi
to
4 Insert your Xpress
the dock.
5 Power on your Xpress
RCi
into
RCi
by pressing the
Power button.
6 Be sure the vehicle is outside and the antenna
AUDIO ANT PWR FM OUT
has a clear view of the sky. Verify that you are receiving the XM signal. There should at least
40 41
Page 22
S
E
L
Vehicle Installation
be one bar on the top left corner of the main display screen that
Signal Indicator
denotes antenna signal strength. You can also press menu and then turn the Control knob to scroll to
ATELLIT
and highlight Signal Indicator. Press the Select button. The Satellite and Terrestrial bars show the strength
TERRESTRIA
of the signal being received. If the signal reception is good, press and hold menu to return to the main display screen.
7 Ensure Xpress
RCi
is tuned to channel 1. Upon power up, Xpress
RCi
should tune to channel 1 by default, when it’s not yet activated. If it’s not on channel 1, refer to “Listening to Satellite Radio” on page 59 to learn about how to tune a channel.
8 Turn on your vehicle’s stereo system. Set it to play input from the
auxiliary input source.
9 You should hear XM channel 1 through your vehicle’s stereo system. You
are now ready to activate your Xpress
10 The audio level output of the Xpress
RCi
.
RCi
can be increased or decreased as necessary to match the audio levels of other sources in your vehicle. Refer to “Set Audio Level” on page 95.
If the signal reception is good, but there is no audio when tuned to channel 1, be sure the vehicle’s stereo system is set to the correct source, i.e., auxiliary input
Option 2: Cassette Adapter Installation Instructions
1 Plug the Cassette
Adapter into the green AUDIO connector on the dock.
2 Insert the Cassette
Adapter into the vehicle’s cassette deck. You may need to turn on your vehicle’s stereo system in order to do so.
3 Insert the dock into the
mount.
4 Insert your Xpress
RCi
the dock.
5 Power on your Xpress
the Power button.
6 Be sure the vehicle is outside and the antenna
has a clear view of the sky. Verify that you are receiving the XM signal. There should at least be one bar on the top left corner of the main
into
RCi
by pressing
AUDIO ANT PWR FM OUT
source (step 8). Also be sure that the audio level is set high enough to be heard (step 10). Refer to “Troubleshooting” on page 107 for additional help.
42 43
Page 23
S
E
L
S
E
L
Vehicle Installation
display screen that denotes antenna signal strength. You can also press
Signal Indicator
menu and then turn the Control knob to scroll to and highlight Signal
ATELLIT
Indicator. Press the Select button. The Satellite and Terrestrial bars show the strength of the signal being received. If the signal reception is
TERRESTRIA
good, press and hold menu to return to the main display screen.
7 Ensure Xpress
1. Upon power up, Xpress
RCi
is tuned to channel
RCi
should tune to channel 1 by default, when it’s not yet activated. If it’s not on channel 1, refer to “Listening to Satellite Radio” on page 59 to learn about how to tune a channel.
8 If you haven’t done so, turn on your vehicle’s stereo system. Set it to
play input from the cassette source.
9 You should hear XM channel 1 through your vehicle’s stereo system.
You are now ready to activate your Xpress
10 The audio level output of the Xpress
RCi
.
RCi
can be increased or decreased as necessary to match the audio levels of other sources in your vehicle. Refer to “Set Audio Level” on page 94.
If the signal reception is good, but there is no audio when tuned to channel 1, be sure the vehicle’s stereo system is set to the correct source, i.e., cassette source (step 8). Also be sure that the audio level is set high enough to be heard (step 10).
Refer to “Troubleshooting” on page 107 for additional help.
44 45
Option 3: PowerConnect Installation Instructions
1 Insert the dock into the
mount.
2 Insert your Xpress
the dock.
3 Power on your Xpress
by pressing the Power button.
4 Be sure the vehicle is outside and the antenna
has a clear view of the sky. Verify that you are receiving the XM signal. There should at least be one bar on the top left corner of the main display screen that denotes antenna signal strength. You can also press menu and then turn the Control knob to scroll to and highlight
Signal Indicator. Press the Select button. The Satellite
and Terrestrial bars show the strength of the signal being received. If the signal reception is good, press and hold menu to return to the main display screen. You are ready to make the audio connection.
RCi
into
RCi
Signal Indicator
TERRESTRIA
ATELLIT
Page 24
Vehicle Installation
5 You’ll first need to find an available FM channel. An available FM
channel is one that’s not being used by an FM radio station in your area. When you tune your FM radio to an available channel, you should only hear static or silence – not talk or music. To find an available FM channel:
• ManuallytunethroughyourlocalFMchannelsonyourvehicle’sFM
radio. Locate and create a list of channels that aren’t being used by any
8 Set your Xpress
have selected in step 7:
Press menu.
Press the Select button to select Vehicle Mode.
Press the Select button to select FM Transmitter
which will turn yellow.
RCi
to transmit on the same FM channel that you
FM radio station. Write down the list. Once you have created your list of available FM channels, you will need to find the one that provides the best match for Xpress
TIP! You’ll need to use the ‘Manual’ tune function on your vehicle’s FM radio to tune through every FM channel one-by-one. Turn on your vehicle’s FM radio. Start at 88.1 and use the ‘Manual’ tune function on your vehicle’s FM radio to tune through each FM channel one-by-one (88.1 followed by 88.3 etc.) to locate channels that aren’t being used by a local FM radio station. Write down each FM channel that has only static or silence on it, until you reach 107.9.
6 Ensure Xpress
RCi
is tuned to channel 1. Upon power up, Xpress tune to channel 1 by default, when it’s not yet activated. If it’s not on channel 1, refer to “Listening to Satellite Radio” on page 59 to learn about how to tune a channel.
7 Pick the first FM channel on your list from step 5. Turn on your vehicle’s
RCi
.
RCi
should
Turn the Control knob clockwise to display On and press
the Select button.
IMPORTANT! The Xpress programmed with 97.9 as the default FM channel.
RCi
is shipped with the FM Transmitter Off, and is
FM radio (if you have not already done so) and tune it to this FM channel.
46 47
Page 25
Vehicle Installation
To set and select an FM preset:
1. Press menu.
2. Press the Select button to select
Vehicle Mode.
3. Scroll to highlight FM Channels and press the Select button.
4. Scroll to highlight the storage location (FM-1 to FM-5) you want to set and press the Select button. You can choose among the following options:
i. If the chosen storage location is empty (denoted by “---“), or if
the storage location contains the FM preset currently being used (denoted by “Current”), then a list of FM channels is displayed.
ii. If the chosen storage location has an FM preset that is not currently
being used, and you want to edit it, scroll to highlight Edit Channel and press the Select button to see the list of FM channels.
TIP! You can also preset a new FM preset in a storage location without having to start using it right away. Just press menu and exit the screen.
7. The chosen FM channel will be confirmed on the display screen and the Xpress
RCi
will tune to that FM channel.
Press the Select button to continue.
8. Set your vehicle’s FM radio to same FM channel.
IMPORTANT! You’ll first need to find an unused FM channel that is available in your area.
iii. If the chosen storage location has an FM preset that is not
currently being used, and you want to start using it, press the Select button to select Start Using. Skip to step 7.
5. Scroll to highlight the desired FM channel from the list and press the Select button.
6. If you are editing the storage location that has the “Current” FM channel, skip to step 7. Otherwise press the Select button to select
Option 4: FM Direct Adapter (FMDA) Installation
The FMDA needs to be installed by a professional installer. Professional installation can help improve your radio’s reception and significantly reduce the visibility of wires. To learn more, check with the retailer where you bought your radio, or go to xmradio.ca/accessories.
Start Using.
48 49
Page 26
Activation
50 51
Page 27
Activation
Using Your Xpress
Before you can enjoy Commercial-Free Music, plus Sports, News, Talk & Entertainment, you need to activate your Xpress
1 Make sure your Xpress
RCi
is properly installed and receiving the XM
RCi
.
signal so that you can hear the audio on channel 1.
2 Make a note of your XM Radio ID. You can find it on channel 0, on a
label on the bottom of the gift box, and on the label on the back of your
RCi
Xpress
NOTE! The XM Radio ID does not use the letters I, O, S, or F.
.
3 Activate your service:
•Online: Go to www.xmradio.ca and click on “ACTIVATE RADIO” in the
top right corner
OR
•By phone: Call 1-877-GET-XMSR (1-877-438-9677)
TIP! You can follow the built in activation wizard in your
RCi
. If your radio has not been activated, press menu
Xpress and the first item in the list will be Activate Radio. Press the Select button. A series of screens will guide you through the activation process. Follow the instructions on each screen. Press the Select button to advance to the next screen, or menu to cancel and return to the main display screen.
4 When your service is activated, your Xpress
RCi
will receive all channels
Welcome
The next few screens will help you activate your satellite radio. Please press Select to continue with the activation of your radio, or press menu to cancel activation at this time.
Press Select to continue
to which you have subscribed. At this time, if you turn the control knob, you can scroll and tune into other channels. Activation usually takes 10 to 15 minutes, but may take up to an hour. We recommend that your radio remain on until activated.
52 53
RCi
Page 28
Using your Xpress
Antenna Signal
RCi
The Main Display
When listening to a channel, information about the channel is displayed.
Changing the Display Mode
You can split the screen to simultaneously view what’s playing on the current channel and up to 3 other channels in any category, or view what’s playing on the current channel and the last channel you had tuned at the same time.
Strength
Tuning Mode
Time
Choose from:
Channel Name & Logo Channel Number
Artist Name or Talk Show Host or Sports Teams/Score
split screen with current channel and three other channels
split screen with current channel and previous channels
or to change
Song Title
or Talk Show Schedule
or Game Time/Game Details
main display screen with current channel
To change the display mode, press display.
TIP! When in split screen with the channel list, you can scroll through the list of channels, just like when it appears on the full screen, by turning the Control knob clockwise or counter-clockwise. Press categories. Press the Select button to select a channel.
TIP! Press jump to change to the previous channel.
54 55
Page 29
Using your Xpress
...
RCi
Navigation Basics
Power Button
Pressing the Power button turns the Xpress
Control Knob and Select Button
Navigate the Xpress
• Control knob: Turning it clockwise or counter-clockwise scrolls through lists and highlights an item in the list.
• Select button (press and release): Pressing it on the center selects a highlighted item.
• Select button (press and hold): Pressing it on the center displays the SongSaver/TuneSelect menu.
When the Select button is pressed at the top, bottom, left, or right edges (instead of the center), it selects display, jump,
• Display: Changes the display mode between main display screen and split screen.
• Jump: Tunes to the previously tuned channel.
or : Displays the channel categories such as Sports, Comedy, Rock, etc.
• Repeated presses cycle through the categories one at a time. In Replay mode, rewinds or fast-forwards through the temporarily stored content.
56 57
RCi
using the Control knob and Select button:
RCi
On or Off.
, or respectively.
Info Button
Pressing info toggles the display to show the sports ticker or the stock ticker at the bottom of the screen.
• Sports Ticker: Displays information about upcoming games and scores for games in progress that have been selected with GameSelect. Refer to “GameSelect” on page 75.
• Stock Ticker: Displays the stock value of up to 20 selected stocks.
TIP! Refer to “GameSelect” on page 75 to add sports teams to the Sports Ticker. Refer to “Stock Quotes” on page 78 to add stocks to the Stock Ticker.
Menu Button
Pressing menu displays various options to make setup and feature changes. Pressing menu when in menu options returns to the previous menu option until menu options is exited.
Pressing and holding menu displays the FM Channels menu, where a preset FM channel can be easily selected.
Number Buttons
In Favourite Channels mode, each number button stores a favourite channel in its button location and provides one touch access to it afterward. In Direct mode, number buttons directly tune to a channel when the channel number is entered. In SongSaver mode, a number button plays the saved song in its button location.
Page 30
Using your Xpress
RCi
Fav Button
Pressing fav toggles between the different tuning modes: Direct mode, Favourite
Listening to Satellite Radio
Tune a channel:
Channels mode, and SongSaver mode.
1. Turn the Control knob clockwise or counter-clockwise to scroll
• Direct mode: The 0-9 buttons directly tune to a channel when the channel number is entered.
• Favourite Channels mode: Pressing one of the 0-9 buttons tunes to a channel that has been saved as a favourite channel to that button location.
• SongSaver mode: Selecting one of the 0-9 buttons plays a song that has been saved to that button location.
TIP! Refer to “Favourite Channels” on page 63 to learn more about Favourite Channels. Refer to “SongSaver” on page 80 to learn more about SongSaver.
forward or backward through the list of channels.
2. You’ll first see the channel logo and current artist. As you pause on a channel, after a few seconds the current song title appears. While you pause, it will toggle between song title and artist name.
3. Press the Select button to select a highlighted channel.
Pause and Replay Buttons
Replays up to 60 minutes of live radio. plays/pauses, fast-forwards through temporarily stored content.
TIP! Refer to “Pause and Replay” on page 70 to learn more about Pause and Replay.
58 59
rewinds, and
TIP! You can configure the Xpress channel after 3 seconds. Refer to “Auto Tune” on page 62 for instructions.
RCi
to automatically tune to the highlighted
Page 31
Using your Xpress
RCi
View a category:
Channels are organized into categories to make it easier for you to find the ones that suit your taste.
1. To view a category, press
2. Scroll through the category to find the channel you want.
3. Press the Select button to select the channel, or press
the previous or next category.
TIP! To briefly listen to each channel in the category, select Scan near the end of the category list and then press the Select button. Refer to “Scanning Channels in a Category” on page 64 to learn more about Scan.
60 61
or .
or to view
Direct Tune
A channel can be tuned directly by entering the channel number using the number buttons.
RCi
1. Before entering a channel number, put the Xpress Direct mode. Ensure “Direct” appears at the top of the display screen. If not, press fav until it is displayed.
2. Use the number buttons (0-9) to enter the channel number and wait a moment until the channel is tuned, or press the Select button to immediately tune to the channel.
in the
Page 32
Using your Xpress
RCi
Auto Tune
The Auto Tune feature allows you to tune to a channel when scrolling through the channel list, without having to press the Select button. When a channel is highlighted in the channel list, after 3 seconds the radio automatically tunes to that channel. The Auto Tune feature is off by default.
To turn Auto Tune on (or off):
1. Press menu.
2. Scroll down to highlight Channel Access and press the Select button.
3. Press the Select button to select Auto Tune which will change to
yellow.
4. Turn the Control knob clockwise until On is displayed (or counter- clockwise until Off is displayed) and press the Select button.
Jump
Press jump to listen to the last channel you were listening to.
TIP! You can view what’s playing on both the current channel and the previous channel at the same time. Refer to “Changing the Display Mode” on page 55.
62 63
Favourite Channels
You can set up to 10 of your favourite channels so you can easily access them. Each favourite channel can be assigned to a number button.
To assign a favourite channel to a number button:
1. Tune to the desired channel.
2. Be sure you are in Favourite
Channels mode. Press fav until “Favourite Channels” appears at the top of the display screen.
3. Press and hold the number button 0-9 you want to assign to that favourite channel.
To listen to a favourite channel:
1. Be sure you are in Favourite Channels mode. Press fav until “Favourite Channels” appears at the top of the display screen.
2. Press the number button 0-9 that was assigned to the desired favourite channel.
TIP! To see your list of favourite channels when in the Favourite Channels mode, press display. Scroll to highlight a favourite and press the Select
button to listen to that channel.
Page 33
Using your Xpress
RCi
Scanning Channels in a Category
You can scan a category and listen to each channel for 3 seconds before the next channel is automatically tuned. If you want to stay tuned to a channel and stop the scan, just press the Select button.
To scan a category:
1. Press
2. Scroll down to highlight the next to last item in the category which will
be Scan and the category name.
3. Press the Select button. The scan will begin.
4. Press the Select button to stop the scan and listen to the channel that
was last scanned.
or until the desired category is displayed.
FM Presets
FM presets make it easy to quickly access stored FM channels and choose a new FM channel from them.
Use FM presets when you use PowerConnect to listen to your Xpress through your vehicle’s FM radio. (Refer to “Option 3: PowerConnect Installation Instructions” on page 45 for more information.)
To start using a different FM preset:
1. Press and hold menu until FM Channels is displayed.
2. Scroll to highlight the desired FM preset and press the Select button.
3. The new choice will be confirmed and the Xpress
RCi
RCi
will tune to the chosen FM preset. Press the Select button to return to the main display screen.
IMPORTANT! You need to ensure that the FM Transmitter in the Xpress turned On, and that your vehicle’s FM radio is tuned to the same FM channel.
TIP! To configure the list of preset FM channels, you need to find available FM channels in your area. Refer to ”Find Available FM Channels in Your Area” on page 87. Next, refer to “Set and Select FM Channels” on page 92 to program your FM presets.
RCi
is
64 65
Page 34
Using your Xpress
RCi
Skip a Channel
Channels can be removed from the channel list. Once a channel is set to be skipped, it will not appear in any channel list but the channel can still be tuned by using Direct Tune.
You can also add back a channel you had previously designated to be skipped.
To skip (or add) channels:
1. Press menu.
2. Scroll to highlight Channel
Access and press the Select button.
3. Scroll to highlight Channel Skip/ Add and press the Select button.
4. Each channel preceded by 3 will appear in the list of channels. To remove a channel from the list, scroll to highlight the channel and press the Select button.
5. Each channel preceded by add a channel back to the list, scroll to highlight the channel and press the Select button so it is once again preceded by a 3.
6. When finished press menu repeatedly to exit.
66 67
does not appear in the list of channels. To
Block xL (Explicit Language) Channels
Some channels may contain explicit language. When xL appears in the channel logo, explicit language may be heard on that channel. If you do not want explicit language channels, they can be removed from the channel list.
To skip all explicit language channels:
1. Press menu.
2. Scroll to highlight Channel Access and press the Select button.
3. Scroll to highlight xL Channels and press the Select button. xL
Channels will change to yellow.
4. Turn the Control knob clockwise until Off is displayed. Press the Select button.
5. None of the explicit language channels will appear on the channel list or on the channel skip/add list when xL Channels is set to Off.
To add explicit language channels to the channel list:
1. Press menu.
2. Scroll to highlight Channel Access, and press the Select button.
Page 35
Using your Xpress
3. Scroll to highlight xL Channels, and press the Select button. xL Channels will change to yellow.
4. Turn the Control knob counter-clockwise until On is displayed and press the Select button.
5. The explicit language channels will now appear on the channel list and on the channel skip/add list.
RCi
Special Features
68 69
Page 36
Special Features
Pause and Replay
Pause and Replay gives you the opportunity to “hear that again” by temporarily storing and letting you access content played during the last 60 minutes. Pressing
or places the Xpress
TIP! This feature applies to the current listening session only. Turning off your
RCi
removes the temporarily stored content from the radio.
Xpress
Both display modes (main display screen and split screen) can display previously played tracks. When in Replay mode you can turn the Control knob to view and scroll up and down the Replay List. Press the Select button to listen to the highlighted selection. The Replay List is displayed from newest to oldest.
To pause:
1. Press
.
2. To resume play, press
RCi
into Replay mode.
again.
3. Press and release to rewind through a song in increments, or press and hold
TIP! Press and hold track.
to continuously rewind through a song.
for 3 seconds to skip all the way back to the first
To listen to the next track:
1. Press
2. Press and release
to fast-forward to the next track.
to fast-forward through a song in increments
or press and hold
TIP! To return to live broadcast, press and hold
TIP! If you press mode.
to continuously fast-forward through a song.
or
in live mode, the Xpress
until “Live” appears.
RCi
will be put in Replay
To listen to the previous track:
1. Press
to rewind to a previous
track.
2. If the current track has been playing for longer than 5 seconds, it is played from its beginning. If the current track has been playing for less than 5 seconds, the previous track is played.
70 71
Page 37
Special Features
TuneSelect
TuneSelect finds your favourite artist and song whenever they’re being played on any channel. Xpress and songs.
To save a favourite artist or song:
1. When you hear a favourite artists or songs, press and hold the Select button for 2 seconds.
2. Scroll to highlight TuneSelect Artist to be notified when any song by the artist is played on any channel, or scroll to highlight TuneSelect Song to be notified when the song is played on any channel. Press the Select button.
3. When an artist or song on your TuneSelect list plays on any channel, you’ll hear an alert tone and see a message that informs you about the artist/song and the channel the song is being played on. To switch to that channel, press the Select button.
RCi
can track up to a combination of 20 of your favourite artists
To remove an artist or song from your TuneSelect list:
1. Press menu.
2. Scroll to highlight Edit Alerts, and press the Select button.
3. Press the Select button to select Edit TuneSelect.
72 73
Page 38
Special Features
4. Scroll to highlight the artist or
song you want to remove from your TuneSelect list, and press the Select button.
GameSelect
GameSelect lets you select up to 50 of your favourite sports and/or teams to view their scores and stats at any time. In addition, you can choose to be notified when they play on any channel.
5. Scroll to highlight Do Not Alert to disable the alert for that artist or
To add sports teams to GameSelect:
song. Press the Select button.
6. Scroll to highlight Delete to
remove the artist or song from your list. Press the Select button.
TIP! You can switch between Alert on Artist and Alert on Song at the “Edit
Alerts > Edit TuneSelect” sub menu.
•Toalertonanartistname,scroll
to highlight a song title and choose Alert on Artist. Press the Select button.
•Toalertonasongtitle,scrollto
highlight an artist name and choose Alert on Song. Press the Select button.
TIP! You can also TuneSelect artists and songs in both Replay and SongSaver modes.
1. Press menu.
2. Scroll to highlight Info Extras and press the Select button.
3. Scroll to highlight Sports and press the Select button.
4. Scroll to highlight a favourite sport, and press the Select button.
5. If your favourite sport is played by teams, scroll to highlight your
favourite team, and press the Select button.
6. A check mark 3 appears next to sports/teams you have selected.
7. To view current scores and stats for the sports and teams on your list, enable the sports ticker by repeatedly pressing info until Sports is displayed at the bottom left of the display screen.
74 75
Page 39
Special Features
8. When a sport/team on your GameSelect list plays on any channel, you’ll hear an alert tone and see a message that informs you about the sport/team and the channel it is playing on. To switch to that channel, press the Select button.
TIP! You can also set a GameSelect by pressing and holding the Select button for 2 seconds while listening to your favourite team or sport.
NOTE! If an event occurs on more than one channel simultaneously, a list of channels will be displayed.
To remove a sport or team from your GameSelect list:
1. Press menu.
2. Scroll to highlight Info Extras and press the Select button.
3. Scroll to highlight Sports and press the Select button.
4. Scroll to highlight the sport (or team sport) to be removed and press
the Select button. The check mark 3 will be removed.
5. If applicable, Scroll to highlight the team to be removed, and press the
Select button. The check mark 3 will be removed.
76 77
To disable GameSelect alert:
1. Press menu.
2. Scroll to highlight Edit Alerts and press the Select button.
3. Scroll to highlight Edit GameSelect and press the Select button.
4. Scroll to highlight the sport or team you no longer want to be
alerted about and press the Select button.
Page 40
Special Features
Stock Quotes
You can track the price and daily movement for up to 20 of your favourite stocks. The stock ticker can be enabled at the bottom of the screen by repeatedly pressing info until Stocks is displayed at the bottom left of the display screen.
NOTE! Information about most stocks and indices listed on the NYSE, AMEX, or NASDAQ is available. Market information is delayed approximately 25 minutes. Stock data provided by ComStock, Inc.
To add a stock:
1. Press menu.
2. Scroll to highlight Info Extras and press the Select button.
3. Press the Select button to select Stocks.
4. If you already have stocks in your
list press the Select button to select Add Stocks. If not, then skip this step.
5. Turn the Control knob to select the letters for the stock symbol. Press the Select button after each letter.
TIP! Xpress the symbols for more than 9,000 regularly traded stocks.
RCi
will help you complete
6. When the stock symbol has been correctly entered, you may be prompted to add stock by pressing Select button. Or you may need to turn the Control knob counter clockwise until Stock? appears on display screen. At this time, press the Select button.
7. At the main display screen, press info to see your stock quotes.
TIP! To turn on/off the scrolling of stock prices, refer to “Scrolling or Paging
Display Appearance” on page 98.
To remove a stock:
1. Press menu.
2. Scroll to highlight Info Extras and press the Select button.
3. Press the Select button to select Stocks.
4. Scroll to highlight Erase Stocks and press the Select button.
5. Scroll to highlight the stock you want to remove from your list and
press the Select button.
6. Scroll to highlight Yes and press the Select button.
TIP! To remove your entire stock list, scroll to highlight Erase All Stocks,
press the Select button, scroll to highlight Yes, and press the Select button.
78 79
Page 41
Special Features
SongSaver
You can save up to 10 songs in the Xpress stays permanently stored on the radio until it is overwritten or deleted.
1. When you hear a song you want to save, press and hold the Select button until Add to SongSaver is displayed.
2. Press the Select button again.
RCi
to listen to them later. Each song
3. Your song is saved to the next available number button location.
TIP! When all ten buttons are used up, the next song added to SongSaver
overwrites the oldest song saved (i.e., the 11th song is saved to button 1).
NOTE! Only songs from live broadcasts can be added to SongSaver.
To listen to a saved song:
1. Put the Xpress
RCi
in SongSaver mode. Press fav until SongSaver
appears on the display screen.
2. Press the number button for the song you want to hear.
TIP! To see your list of saved songs either rotate the Control knob while in
main display screen, or go to split screen and view 6 songs at a time. Pressing
NOTE! Resetting factory default settings will permanently remove any SongSaver songs.
or
takes you to the previous and next songs respectively.
80 81
Page 42
Where Else Can You Use Your Xpress
?
RCi
82 83
Page 43
Where Else Can You Use Your Xpress
RCi
?
Configuring Your
XM offers a variety of accessories that allow you to adapt your Xpress your lifestyle and enhance your listening experience. With these accessories, you can effortlessly take your Satellite Radio listening experience from your vehicle to your home or office or on the go — all with a single subscription.
• In the Home, Office, etc. – With a Home Kit, you can play your Xpress an existing home, office, or other stereo system
• In Other Vehicles – With a Vehicle Kit, you can enjoy your Xpress than one vehicle.
• In Almost Any Location You Like – With a desktop or portable Sound System you have the freedom to listen to your Xpress you want, from your kitchen or den, to the office, to outside on the deck, or at a picnic.
For more information on XM accessories or to purchase an accessory, please visit your local retailer or www.xmradio.ca/accessories.
RCi
RCi
Radio to
RCi
over
RCi
in more
where and when
Xpress
84 85
RCi
Page 44
Configuring Your
Xpress
RCi
Radio ID
Your Xpress is used when subscribing to the XM radio service during the activation process and is displayed on channel 0.
To display the Radio ID:
86 87
RCi
has an alphanumeric ID which uniquely identifies the radio. This ID
1. Ensure “Direct” appears at the top of the display screen. If not, press fav until it is displayed.
2. Use the number buttons (0-9) to enter the channel number 0 and wait a moment until the channel is tuned or press the Select button.
3. The Radio ID is displayed until you tune to another channel.
Find Available FM Channels in Your Area
Before attempting any of the procedures below, you should park your vehicle in a safe location. Do not attempt to set up your FM channels or any
RCi
Xpress
PowerConnect allows you to listen to XM audio through your vehicle’s FM radio. You will first need to find an available FM channel, which is a channel that is not being used by an FM radio station in your area. When you tune your FM radio to an available channel, you should only hear static or silence – not talk or music.
Once you have found an available channel, you need to tune Xpress built-in transmitter to the same channel to receive XM sound through your vehicle’s radio.
To find an available FM channel:
function while driving.
RCi
’s
• Manually tune through your local FM channels
Manually tune through your local FM channels on your vehicle’s
FM radio. Turn on your vehicle’s FM radio. Start at 88.1 and use the ‘Manual’ tune function on your vehicle’s FM radio to tune through each FM channel one-by-one (88.1 followed by 88.3 etc.) to locate channels that aren’t being used by a local FM radio station. Write down each FM channel that has only static or silence on it, until you reach 107.9. Once you have created your list of available FM channels, you will need to find the one that provides the best match for Xpress
Tune Xpress
not yet activated). Pick the first FM channel on your list and tune
RCi
.
RCi
to a favourite XM channel (or to channel 1, if it’s
Page 45
Configuring Your
Xpress
RCi
the FM radio to that channel. Then tune the Xpress
RCi
to the same FM channel. (Refer to “Set and Select an FM Channel” on page 92.) You should hear the XM channel through your vehicle’s radio. If you are satisfied with the sound quality, you’re done! If this FM channel doesn’t work well for you, work down the list until you find an FM channel that allows you to hear XM clearly.
NOTE! You may find an FM channel with static or silence that does not work with
RCi
Xpress
. It is possible that some type of inaudible interference is present that prevents reception of the FM channel or a different audio connection method.
TIP! If you regularly drive from one location to another, such as your daily commute, you may need to use different FM channels along your route for best performance. If this is the case, we recommend saving the best FM channels as presets on your FM radio and channel for the area you are in.
TIP! It will be much more difficult to find available FM channels in large cities than in most suburban or rural locations. A direct audio connection using the Aux In Cable, Cassette Adapter or professional installation is your best solution if you drive in or near large metropolitan areas.
NOTE! The performance of FM radios are different, based on manufacturer and vehicle style. Some may not work well with the type of FM transmitter used by
RCi
Xpress
. This is why we recommend a direct audio connection using the Aux In Cable or Cassette Adapter if they can be used in your vehicle. Professional installation can also resolve almost any performance issue.
RCi
Xpress
broadcast. Your only options are to use another
RCi
Xpress
. Then you simply select and match the best
88 89
Page 46
Configuring Your
Xpress
RCi
Turn FM Transmitter On/Off
The built-in FM Transmitter in the Xpress (or FMDA).
To turn the FM Transmitter On:
Press menu.
Press the Select button to select Vehicle Mode.
Press the Select button to select FM Transmitter which will turn
yellow.
Turn the Control knob clockwise to display On and press the Select
button.
IMPORTANT! The Xpress programmed with 97.9 as the default FM channel.
90 91
RCi
works when you use PowerConnect
RCi
is shipped with the FM Transmitter Off, and is
To turn the FM Transmitter Off:
Press menu.
Press the Select button to select Vehicle Mode.
Press the Select button to select FM Transmitter which will turn yellow.
Turn the Control knob counter-clockwise to display Off and press the
Select button.
Page 47
Configuring Your
Xpress
RCi
Set and Select FM Channels
The Xpress channels. At any time, you can select any one of these 5 FM presets to transmit audio from the Xpress choice of 5 FM presets also makes it easy to switch to the appropriate FM channel as you travel from one area to another. Each FM preset is stored in its own storage location. You can easily add or edit the FM preset in any one of the 5 storage locations.
To set and select an FM preset:
92 93
RCi
allows you to easily store (i.e., preset) up to 5 different FM
RCi
to your vehicle’s FM radio. Having a
IMPORTANT! The FM Transmitter has to be turned On before you can set or select an FM channel.
TIP! The FM-1 storage location is preset with FM channel 97.9.
1. Press menu.
2. Press the Select button to
select Vehicle Mode.
3. Scroll to highlight FM Channels and press the Select button.
4. Scroll to highlight the storage location (FM-1 to FM-5) you want to set and press the Select button. You can choose among the following options:
i. If the chosen storage location is empty (denoted by “---“), or
if the storage location contains the FM preset currently being used (denoted by “Current”), then a list of FM channels is displayed.
ii. If the chosen storage location has an FM preset that is not currently
being used, and you want to edit it, scroll to highlight Edit Channel and press the Select button to see the list of FM channels.
iii. If the chosen storage location has an FM preset that is not
currently being used, and you want to start using it, press the Select button to select Start Using. Skip to step 7.
5. Scroll to highlight the desired FM channel from the list and press the Select button.
6. If you are editing the storage location that has the “Current” FM channel, skip to step 7. Otherwise press the Select button to select Start Using.
TIP! You can also preset a new FM preset in a storage location without having to start using it right away. Just press menu and exit the screen.
7. The chosen FM channel will be confirmed on the display screen and the Xpress
channel. Press the Select button to continue.
RCi
will tune to that FM
Page 48
Configuring Your
Xpress
RCi
8. Set your vehicle’s FM radio to same FM channel.
IMPORTANT! You’ll first need to find an unused FM channel that is available
in your area.
To quickly select an FM channel from the preset list:
1. Press and hold menu until FM Channels is displayed.
2. Scroll to highlight the desired FM preset and press the
Select button.
RCi
3. The new choice will be confirmed and the Xpress chosen FM channel. Press the Select button to return to the main display screen.
4. Set your vehicle’s FM radio to same FM channel.
94 95
will tune to the
Set Audio Level
If you are using the Aux In Cable or a Cassette Adapter to play your Xpress your vehicle, you can adjust the audio level to match the volume of other audio
sources you may use, such as a CD player, other FM stations, or an MP3 player.
Do not use the audio level as a volume control. Use the volume control on your vehicle stereo instead.
NOTE! The audio level adjustment is available only when the FM Transmitter is turned Off.
To adjust the audio level:
1. Press menu.
2. Scroll to highlight Vehicle Mode and press the Select button.
3. Scroll to highlight Audio Level and press the Select button.
4. Turn the Control knob to increase or decrease the audio level.
5. Press the Select button.
TIP! If using your Xpress
press menu, scroll to highlight Audio Level and press the Select button. Use the Control knob to adjust to the desired audio level and press the Select button.
RCi
in a home dock or sound system (sold separately),
RCi
in
Page 49
Configuring Your
Xpress
RCi
Signal Indicator
For best reception, your Magnetic Mount Antenna should have an unobstructed view of the XM satellites. In large cities, there are terrestrial transmitters (ground repeaters) to help increase the signal coverage.
RCi
The Xpress signals.
To display the signal strength:
96 97
can display the strength of the received satellite and terrestrial
1. Press menu.
2. Scroll to highlight Signal
Indicator and press the Select button.
3. The Satellite and Terrestrial bars show the strength of the signal being received.
4. If you are having trouble getting a signal reposition the Vehicle Antenna. Be sure your vehicle is outside with an unobstructed view of the sky.
5. Press the Select button to exit the signal indicator display screen.
Display Settings
To change the display’s brightness, backlight timer, and auto dimmer:
1. Press menu.
2. Scroll to highlight Change Display and press the Select button.
3. Press the Select button to select Display Setting.
4. To change:
•Brightness: Press the Select button to select Brightness which will turn yellow. Turn the Control knob to adjust the brightness. Press the Select button when finished.
•Backlight: Scroll to highlight Backlight and press the Select button. Backlight will turn yellow. Turn the Control knob to select
the timer setting for the backlight. Press the Select button when finished.
•Auto Dimmer: When On, auto dimmer adjusts the brightness of the display automatically for daytime and night time. Auto dimmer works when Xpress highlight Auto Dimmer and press the Select button. Auto Dimmer will turn yellow. Turn the Control knob clockwise to On and press the Select button.
RCi
is in the EZConnect Vehicle Dock. Scroll to
Page 50
Configuring Your
Xpress
RCi
Scrolling or Paging Display Appearance
Cold weather can negatively affect the visual quality of scrolling text. By default the stock ticker and sports ticker information is set to scroll across the screen. You can change this so the information is displayed as a page.
To change whether the information is scrolling or paging:
1. Press menu.
2. Scroll to highlight Change Display and press the Select button.
3. Scroll to highlight Display Appearance and press
the Select button.
•Stocks: Press the Select button to select Stocks which will turn yellow. Turn the Control knob to select either Scrolling (the stock ticker will scroll across the screen) or Paging (stock information will appear one page at a time).
•Sports: Scroll to highlight Sports, and press the Select button. Sports will turn yellow. Turn the Control knob to select either Scrolling (scores will scroll across the screen) or Paging (scores will appear one page at a time).
4. Press the Select button when finished.
98 99
Set Time
The time is automatically set for you from the XM signal.
To set your time zone:
1. Press menu.
2. Scroll to highlight Set Time and press the Select button.
3. Press the Select button to select Set Clock.
4. Press the Select button to select Select Time Zone.
5. Turn the Control knob to highlight your time zone and press
the Select button.
To turn on/off Daylight Savings Time:
1. Press menu.
2. Scroll to highlight Set Time and press the Select button.
3. Press the Select button to select Set Clock.
4. Scroll to highlight Daylight Savings and press the Select button.
Daylight Savings will turn yellow.
5. Turn the Control knob to select:
•Turn clockwise to select On if your area participates in Daylight Savings Time.
Page 51
Configuring Your
Xpress
RCi
•Turn counter-clockwise to select Off if your area does not participate in Daylight Savings Time.
6. Press the Select button.
To change the format of the time:
1. Press menu.
2. Scroll to highlight Set Time and press the Select button.
3. Press the Select button to select Set Clock.
4. Scroll to highlight Hour Mode and press the Select button. Hour
Mode will turn yellow.
5. Turn the Control knob to select:
•Turn counter-clockwise to select 12 to show time using a standard clock.
•Turn clockwise to select 24 to show time using a 24-hour clock.
6. Press the Select button.
100 101
Automatic Power
By default, your Xpress receiving power. You can change this so you must manually turn the radio on each time.
To change the Automatic Power setting:
1. Press menu.
2. Scroll to highlight Set Time and press the Select button.
3. Scroll to highlight Automatic Power and press the Select button.
Automatic Power will turn yellow.
4. Turn the Control knob to select:
•Turn clockwise to select Off to turn your radio on manually after it is plugged in.
•Turn counter-clockwise to select On to have your radio turn on automatically when it is plugged in.
5. Press the Select button.
TIP! When the Xpress
not be able to turn it on.
RCi
turns on automatically when it is plugged in and
RCi
is in the EZConnect Vehicle Dock, the remote will
Page 52
Configuring Your
Xpress
RCi
Delayed Power
Use this feature if you are using the EZConnect Vehicle Dock and the vehicle’s cigarette lighter or power adapter socket is always powered on. Delayed power will turn off the Xpress
draining the vehicle’s battery. By default, delayed power is set to Off but can be set for 60, 90, 120, or 180 minutes.
To change the Delayed Power setting:
1. Press menu.
2. Scroll to highlight Set Time
and press the Select button.
3. Scroll to highlight Delayed Power and press the Select button. Delayed Power will
turn yellow.
4. Turn the Control knob clockwise to choose the amount of time (60, 90, 120, or 180 minutes) that should pass before the radio turns off automatically.
5. Press the Select button.
102 103
RCi
after the selected amount of time to avoid
Sleep Timer
The Sleep Timer option is available with the home dock and sound system (sold separately).
RCi
Your Xpress after a period of time. By default, the sleep timer is set to Off but can be set for 15, 30, 45 minutes or 1 hour.
To change the Sleep Timer:
has a sleep timer that can automatically shut off the radio
1. Press menu.
2. Scroll to highlight Set Time and press the Select button.
3. Scroll to highlight Sleep Timer and press the Select button. Sleep
Timer will turn yellow.
4. Turn the Control knob to choose the amount of time that should pass before the radio automatically turns off (15, 30, 45 minutes, or 1 hour)
5. Press the Select button.
Page 53
Configuring Your
Xpress
RCi
Factory Settings
You can clear all of your personal settings, such as Favourite Channels, SongSaver songs, TuneSelect artists/songs, GameSelect sports/teams, Stocks etc., and return the radio to its original out-of-the-box settings.
RCi
To reset the Xpress
NOTE! Clearing your personal settings permanently removes any SongSaver songs and all personal settings.
1. Press menu.
2. Scroll to highlight Factory Settings and press the Select button.
3. At the Restore Defaults screen, turn the Control knob to select:
•Turn clockwise to select Yes to clear your personal settings.
•Turn counter-clockwise to select No to keep your personal
settings.
4. At the Are You Sure? screen, either press the Select button to erase the settings, or press menu to keep the settings. If you do not press the Select button within 5 seconds, the settings will not be reset and the radio will return to the main display screen.
5. Press the Select button. The radio will restore the settings and you will be returned to the main display screen.
104 105
to the Factory Settings:
Demo Mode
A demo automatically starts playing when your Xpress and is either not receiving a signal or not connected to an antenna. It disappears when the antenna is connected properly or when the radio starts receiving a signal. After activation, the demo will not appear.
RCi
If desired, you can put your Xpress radio to demonstrate its features.
To activate or deactivate Demo Mode:
1. Make sure your Xpress antenna so it cannot receive a signal or disconnect the antenna.
2. Press menu.
3. Scroll to highlight Factory Settings and press the Select button.
4. Press the Select button to select Demo Mode. Demo Mode will turn
yellow.
5. Turn the Control knob to select:
•Turn clockwise to On to play the demo.
•Turn counter-clockwise to Off when you’re ready to turn the demo off.
6. Press the Select button.
in demo mode after you have activated the
RCi
is not receiving a signal. Either cover the
RCi
has not been activated
Page 54
Troubleshooting
106 107
Page 55
Troubleshooting
RCi
Xpress problem, try this:
has been designed and built to be trouble-free but if you experience a
• Check that all connections are firm and secure.
• Make sure the vehicle power socket is clean and free of corrosion.
RCi
• Make sure you have connected the Xpress
as described in this User Guide. Verify that the PowerConnect Power Adapter is plugged into the vehicle’s cigarette lighter or power adapter socket, and that the LED on the PowerConnect Power Adapter is lit (on). If not, your vehicle may need to be running to provide power to the socket.
If you see this on the screen: Try this:
Acquiring Signal •Make sure that the vehicle is outdoors with a
clear view of the sky.
•Make sure the Magnetic Mount Antenna is mounted outside of the vehicle.
•Move the antenna away from any obstructed area. For example, if you are parked in an underground garage, you should receive a signal after leaving the garage.
•If you are using Xpress antenna to a south-facing window. Don’t know which way is south? No problem. Start at any window then work from window to window in a simple pattern to find the best location.
RCi
at home, move the
If you see this on the screen: Try this:
Check Antenna Connection •Make sure that the antenna cable is firmly and
Channel Off Air •The channel you’ve selected is not currently
Loading •Your Xpress
Updating •Your Xpress
— •No program information, such as artist name,
securely plugged into the PowerConnect Vehicle Dock. Make sure the cable is not bent or broken.
•Turn Xpress message.
•If the message persists, most likely the Magnetic Mount Antenna cable has been damaged. Replace the antenna.
broadcasting. Tune to another channel.
information This message usually goes away in a few seconds.
encryption code. Wait until the update is done.
•You may be trying to tune to a channel that is blocked or unavailable. Tune to another channel.
song title, or channel exists.
RCi
Off, then On, to reset this
RCi
is acquiring audio or program
RCi
is updating with the latest
If this happens: Try this:
You do not receive all the channels to which you subscribed
•Ensure that you have activated your service by following the steps in “Activation” on page 52.
•Go to www.xmradio.ca/refresh and follow the directions refresh your radio.
•Call 1-877-438-9677 for further assistance.
108 109
Page 56
Troubleshooting
If this happens: Try this:
No audio when using the Aux In Cable or Cassette Adapter
Audio sounds too soft •Raise the volume of your stereo system or
Audio fades or has static when listening
•Check all cables between your Xpress vehicle’s stereo system for a firm and secure connection.
•Ensure you have selected the proper input source on your vehicle’s stereo system.
•If you are using the Vehicle Dock that came with the Universal Xpress Car Kit, ensure that the FM Transmitter in the Xpress increase the audio level of the Xpress “Set Audio Level” on page 95.
increase the audio level of your Xpress the sound quality improves. Refer to “Set Audio Level” on page 95.
•Check all cables for a firm and secure connection.
•If you are using PowerConnect to listen via your
vehicle’s FM radio, and the problem persists, it most likely is interference from another commercial or broadcast FM station. You will need to find an unused or available FM channel in your area. Refer to “Find Available FM Channels in Your Area” on page 87.
•If you are using PowerConnect, and you cannot solve the audio problem, try connecting the audio using the Aux In Cable or a Cassette Adapter. (Refer to page 41 and page 43.) If you cannot use those solutions, consider using an FM Direct Adapter. (Refer to page 49.)
RCi
and your
RCi
is turned Off, and
RCi
. Refer to
RCi
until
If this happens: Try this:
No audio when using PowerConnect or FMDA
No song title or artist name is displayed
Traffic and Weather channels sound different from other channels
i
RC
Xpress
shuts off unexpectedly •If Sleep Timer is set, the Xpress
The demo is playing •Your Magnetic Mount Antenna is not connected
•Check that your Xpress radio are tuned to the same FM channel.
•If you are using the Vehicle Dock that came with the Universal Xpress Car Kit, ensure that the FM Transmitter in the Xpress to “Turn FM Transmitter On/Off” on page 90.
•The information may not be available or updates may be in progress.
•These channels use a different audio technology than other channels so they often sound different from other channels.
after the selected length of time in a home dock/sound system. Set Sleep Timer to Off.
•If Delayed Power is set, the Xpress after the selected length of time in a dock. Set Delayed Power to Off.
or you are not receiving the signal. Check that the antenna is connected properly and is not obstructed.
•Press and hold the Select button for 10 seconds to exit Demo Mode.
•You can disable Demo Mode. Refer to “Demo Mode” on page 105.
RCi
and your vehicle’s FM
RCi
is turned On. Refer
i
RC
will turn off
i
RC
will turn off
110 111
Page 57
Product Specifications
112 113
Page 58
Product Specifications
Patent and Environmental Information
Dimensions
Xpress
4.5 in (W) X 2.5 in (H) X 0.68 in (D)
Remote 40 mm (W) X 119 mm (H) X 14 mm (D)
1.5 in (W) X 4.7 in (H) X 0.55 in (D)
Weight
Xpress Remote 40 g (1.4 oz)
Audio Outputs
3.5 mm diameter mini stereo jack
External Power
Voltage 5V DC Current 1.5A
Remote Battery
Type CR2032 Voltage 3V
114 115
RCi
115 mm (W) X 63 mm (H) X 17 mm (D)
RCi
90 g (3.2 oz)
Patent Information
It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/ or make available any technology incorporated in this product. Furthermore, the AMBE by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The software is licensed solely for use within this product. The music, talk, news, entertainment, data, and other content on the Services are protected by copyright and other intellectual property laws and all ownership rights remain with the respective content and data service providers. You are prohibited from any export of the content and/or data (or derivative thereof ) except in compliance with applicable export laws, rules and regulations. The user of this or any other software contained in an XM radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, hack, manipulate or disassemble the object code, or in any other way convert the object code into human­readable form.
ª
voice compression software included in this product is protected
Environmental Information
Follow local guidelines for waste disposal when discarding packaging and electronic appliances.
Your radio is packaged with cardboard, polyethylene, etc., and does not contain any unnecessary materials.
Page 59
FCC and IC Statement
Copyrights and Trademarks
The user is cautioned that changes or modifications not expressly approved by XM Radio Inc. can void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules and is certified to Industry Canada’s RSS­210 specifications. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Industry Canada’s RSS-210 specifications. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna of the affected receiver.
• Increase the separation between the XM equipment and the affected receiver.
• Connect the XM equipment into an outlet on a circuit different from that to which
the affected receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! The FCC and FAA have not certified this Satellite Radio Receiver for use in any aircraft (neither portable nor permanent installation). Therefore, XM Radio Inc. cannot support this type of application or installation.
©2009 SIRIUS XM Radio Inc. “SIRIUS”, “XM” and all related marks and logos are trademarks of SIRIUS XM Radio Inc. and its subsidiaries. “BBC” and “Radio One” are trademarks of the British Broadcasting Corporation and are used under license. BBC logo © BBC 1996. Radio 1 logo © BBC 2001. Cosmopolitanª is a registered trademark of Hearst Communications, Inc. Elvis Radio logo © EPE Reg. U.S. Pat & TM off. IndyCar (and Design) are registered trademarks of Brickyard Trademarks, Inc., used with permission. Major League Baseball trademarks and copyrights are used with permission of Major League Baseball Properties, Inc. Visit the official website at MLB.com. Games subject to availability and change and may not include all spring training games. All rights reserved. NASCARª is a registered trademark of the National Association for Stock Car Auto Racing, Inc. The NBA identifications are the intellectual property of NBA Properties, Inc. and the respective NBA member teams. © 2009 NBA Properties, Inc. © 2009 NFL Properties LLC. All NFL-related trademarks are trademarks of the National Football League. NHL and the NHL Shield are registered trademarks of the National Hockey League. © NHL 2009. All NHL logos and marks and NHL team logos and marks depicted herein are the property of the NHL and the respective teams and may not be reproduced without the prior written consent of NHL Enterprises, L.P. The Home Ice¨ channel is a registered trademark of XM Satellite Radio Inc. The Swinger Golfer logo is a registered trademark of PGA TOUR, Inc. Visit xmradio.ca/xmlineup for updates. All programming/channel lineup/XM service subject to change or preemption. All other marks and logos are the property of their respective owners. All rights reserved. Hardware, subscription and activation fee required. Other fees and taxes may apply. Month-to-month subscriptions must be activated via telephone. Hardware and subscription sold separately. Subscription governed by XM Customer Agreement, which can be found at xmradio.ca/about/terms­and-conditions.cfm. Prices and programming are subject to change.
116 117
Page 60
Owners Record
Owner’s Record
The radio model number is located below and the XM Radio ID is located on the label on the back of the Xpress
Record the XM Radio ID in the space provided below. Refer to these numbers whenever you call your dealer regarding this product.
Radio Model Number: XDRC2V1KC
XM Radio ID:___________________________
RCi
.
118
Page 61
XDRC2V1KC
Audiovox Electronics Corporation 150 Marcus Blvd. Hauppauge, New York 11788U.S.A. 1 800 645 4994 www.audiovox.com
XM name and related logos are registered trademarks of XM Satellite Radio Inc. All other trademarks are the property of their respective owners.
© 2007 Audiovox Electronics Corporation. All rights reserved.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use