1
Content
Content .............................................................................................................................................. 1
1 Introduction .................................................................................................................................... 3
1.1 Acknowledg ement ............................................................................................................... 3
1.2 Announcements ................................................................................................................... 3
1.3 Safety Instruction ................................................................................................................ 3
1.4 Abbreviation/Terminology .................................................................................................. 5
2 MID Introduction ........................................................................................................................... 6
2.1 MID Operation and Preparation .......................................................................................... 6
2.2 MID Status and Reminder ................................................................................................... 6
3 Quick Start Guide ........................................................................................................................... 8
3.1 Keys Function ..................................................................................................................... 8
3.2 Startup and Shutdown ......................................................................................................... 8
3.3 Open and Close of the Screen ............................................................................................. 8
3.4 Usage of Touch Screen ........................................................................................................ 9
3.5 Home Page ........................................................................................................................ 10
3.6 Visit Application Procedures ............................................................................................. 13
3.7 USB Connection ............................................................................................................... 13
3.8 Typing words ..................................................................................................................... 14
3.9 Operation Technique ......................................................................................................... 16
4 Basic Setting ................................................................................................................................ 17
4.1 SIM Management .............................................................................................................. 17
4.2 Wireless and Internet ......................................................................................................... 18
4.3 Bluetooth ........................................................................................................................... 20
4.4 Data Usage ........................................................................................................................ 23
4.5 More .................................................................................................................................. 25
4.14 Language and Input Method ........................................................................................... 42
4.16 Date and Time ................................................................................................................. 44
5 Multi-Media ................................................................................................................................. 48
5.1 Music................................................................................................................................. 48
5.2 V id eo ................................................................................................................................. 49
5.3 Photo Gallery .................................................................................................................... 49
5.4 Camera .............................................................................................................................. 50
5.5 FM Radio .......................................................................................................................... 51
6 Communication Function ............................................................................................................. 54
6.1 Phone................................................................................................................................. 54
6.2 Text Message ..................................................................................................................... 55
6.3 Contact List ....................................................................................................................... 56
7 Internet ......................................................................................................................................... 58
7.1 Browser ............................................................................................................................. 58
7.2 Email ................................................................................................................................. 59
2
8 Other Applic a t ion Pro c e d ures ...................................................................................................... 62
8.1 Clock ................................................................................................................................. 62
8.2 Calculator .......................................................................................................................... 62
8.3 File Manager ..................................................................................................................... 63
9.4 Recorder ............................................................................................................................ 66
9 Installation of Procedures ............................................................................................................. 67
9.1 Installation ......................................................................................................................... 67
9.2 Uninstall ............................................................................................................................ 67
10 Troubles Shooting ...................................................................................................................... 68
3
1 Introduction
1.1 Ack nowledgem ent
Than ks f or your pur c has e of our pr o du ct. G716，is a 7 inches high clear board computer. Its
CPU is MT8392, which apply the CORTEX-A7, dominant frequency is 1.2GHz, it is based on
Android 4.4.2 operation system, and easy to expand the third application procedure.
The product is designed with various functions, including WCDMA, WIFI, BT, GPS,FM,
voic e c a l l a nd so on. It i s easy t o achi e ve w i r e le s s c o m munica t ion a n d i ntern e t , y o u ha ve a cc ess t o
surf t h e i nternet a nyt i me a nd a n ywh er e; it is also bui lt wi th hi gh a cc ur ac y GP S modu le , s o t ha t it
can b e used f or navigatin g thro ugh ins tal ling map soft wa re. Ther e ar e many se nsors which offer
you brand-new operation and entertainment; besides, it has camera shooting, which leads
electronic consumption to enter into a fresh palm internet entertainment time.
Th e manual systemically introduces the functions, use techniques and announcements, please
read this manual carefully before your operation.
1.2 Announcements
Preventive maintainance
Please always keep the MID dry. To avoid the device short trouble, corrosion fault and
electric short, please prevent the device, battery and charger from water and moisture,
and do n’t operate the device or charger by wet hand.
To avoid failure of device, battery and charger, please prevent the device, battery,
charger from violent shock or shake.
To avoid failure of device, battery and charger, please prevent the device, battery,
charger of all over heating or too cold circumstance
Never shock, throw, prod the MID, or drop, extrude, bend the MID.
Never disassemble the device and accessories arbitrarily, otherwise the device and
accessories are not in our company warranty scope.
1.3 Safety Instruction
Before the operation of the MID, please read this chapter and teach your kids about these
4
information. For further details, please refer to the safety instructions and announcement.
Never use the MID when driving car, in order to ensure safe driving.
In the medical area, please abide by related rules and regulations. Please shut
down the MID when it is near to the medical area.
To avoid the wireless signal to interrupt the plane- controlled signal, please shut
down the MID or using airplane mode when you are boarding a flight,
To avoid electronic equipment failure, please shut down the MID in the vicinage
of hig h-accuracy electronic equi p me nt s .
Please don’t disassemble the MID and accessories. Only authorized agent has
access to service the MID.
Please keep the MID far away from magnetic equipments, the radiation of MID
may erase the data stored in the magnetic equipments.
Never use t he M I D in th e vi cinag e of high temper atur e, inflammable gas ( gas
station).
Protect the MID and accessories from kids reach scope, and avoid the kids to use
the MID without parents’ supervision.
Please comply with related rules and regulations, and respect others’ privacy and
legal rights while using the MID.
Please strictly adhere to related instructions in the manual when using USB cable
to ensure the safety of the MID or PC.
Never use the MID in bathroom or other humid environment, and please protect
the MID from liquid wash or wet.
5
1.4 Abbreviation/Terminology
Abbreviation/Terminology Full Name Description
MID Mobile Internet Device Mobile Internet Terminal
WIFI Wireless Fidelity Base on IEEE 802.11b standard
T F TransFlash Alternative name Micro SD,super
wireless LAN
miniature memory card
6
2 MID Introduction
2.1 MID Operation and Preparation
Battery Charging
If this navigator is first used, please use AV adaptor to fully charge it.
1. Apply the power adptor to charge for MID.
2.2 MID S tatus and Reminder
Reminder icons
When s ome re mi nd mess ag e a ppe ar s in yo ur re min der wi nd ow, plea se cli c k c olu mn a nd sl i p
the screen to open the reminder list. Choose the menu you need, and confirm the information.
Then y ou c a n cl os e t he r e min de r window through clicking the column to slide up. Plea se ref er to
below status icons:
New email
USB connected
Return button
Display recently-used
application
Current electric
volume.
Airplane Mode on
USB debugging connected
Downloading
Home button
WIFI connected, internet is
available
7
Reminder board
Reminder icons will work while receiving emails, W IFI i s ope n, you can open the reminder
board to view the detailed information.
Open the reminder board
When th e re min der c olu mn s hows new r emi nde r ic on, plea se h old t he c olu mn an d slip down
your finger, then the reminder board is opened.
8
3 Quick Start Guide
3.1 Keys Function
Keys Funcction Description：
Power button Short press to sleep/wake up, long press to startup and
Vol ume +（up） increase the volume
Vol ume -（down） decrease the volume
HOME button （home）
shutdown.
Click it in any interface will return to main interface.
Back button（back）
Menu butt o n
Setting button
click it in any interface will return to previous menu
This button wil l di splay in me n u i nte rfa ce .
display recently browsed history
3.2 Startup and Shutdown
Startup
Long pres s POWER key for three seconds, you can enter into sta rtup picture. The s ystem
enters into screen lock status, please unlock it.
Shutdown
1． Long press POWER, it will popoup shutdown window.
2． Shutdowm window contains mute mode, airplane mode,reboot mode and shutdown
four options.
3． Click Shutdown is the last step.
3.3 O pen and Close of t h e Screen
Screen will be closed on its own when no operation happens.
1. Scr ee n will be cl os ed on i ts ow n i f no op er a tio n ha p pens for s ome ti me t o s a ve b at tery
9
power
2. When screen is open, press POWER key, the screen will be closed immediately.
Open the screen when it is closed.
If the screen is closed, short press PO WER to open the screen. The screen will be locked
open i t, it will show the picture as below picture, left slide t o unl ock a nd e nter into c ame ra, right
slide the unlock icon to unlock the screen.
Picture 3.1
3.4 Usage of Touch Screen
MID operating methods
There are below methods to view the main screen, menu and application procedure in your MID.
Click
When y o u wa nt to us e the scree n ke yboard typ i n g or cho os e applica t i o n i n the ma i n interfa c e, y o u
only need to touch it by your finger.
Press on
If you want to open some item( textbox or the link in the webpage), or shortcut and main
proc e d ur e mo v e, y ou c a n pr e s s o n thi s it e m.
Quickly slide or slide
Quickly slide or slide indicates make quick vertical or horizoncial movement by finger.
Pull
Before you pull, you need to hold the it with strenghth until you pull it into the position you want.
Rotate
10
Home
For mos t pict ures, you onl y nee d to retat e the MID sidewise t o chan ge the scre en dir ection fr om
horizoncial to vertical. For instance, when you are typing wods, and watching movies.
3.5 Home Page
Main interface as below picture 3.2, long press the blank and it will popup windows to set
wallpaper, folder, widgets, and shortcut.
Notice
column
Batty volume
time
return
Picture 3.2
display recently browsed
history
The extended home page
The home page can be extended beyond the wideness of screen to provide more space,
whic h you can p ut new-a dded s hort cuts a nd w idget s. Cl ick the b lank s pace in h ome pa ge
then s l i d e r ig ht or lef t t o ex te nd t o the r i ght or l ef t of t he s cr ee n. I n t he h ome page, there a r e
two extended pictures, as Picture 3.3.
11
Picture 3.3
The shortcut icons management in desktop application.
Create folder icon in desktop
1. Drag the icons need to be put together on one icon(can also overlay several
icons)as Picture 3.4.
2. Then click the overlayed icons, the applications can be folded, as Picture 3.5.
Clic k the unna me d fol der in t he b lack b ox, it wi ll p opu p the hi dde n ke yboar d, t he fol der na me
can be renamed (this is similiar with Apple IOS system), the icons position can be changed
through long press.
Picture 3.4
12
Picture 3.5
Remove the icons in desktop
1. Long press the icons need to be remove, then on the right above of the scr een, it
will appear icons.
2. Drag the icon to the above of the remove icon, till the icon become red, then move
your finger to delete the icon.
Change the wallpaper of desktop
1． In h o me page, lo n g press a ny b l a n k s pace i n ma i n s c r e e n, i t wi ll p o p u p a window
to change the wallpaper.
2． Click the gallery or wallpaper gallery to select the wallpaper.
13
eturn to
3.6 Visit Application Procedures
Click in right top of Picture 3.2, enter into main interface as Picture 3.6,
choose the applicat ion procedure you want to visit.
Picture 3.6
3.7 USB Connection
MID stora g e configuration
Before transmitting documents, you have to conduct storage configuration for your MID:
1. Connect the MID and computer by USB cable, the reminder column will show the
remind information.
2. Open t he reminder board; please view the MID status and reminder to learn how to
open the board.
3. In the reminder board, click the “USB Connected”, it will as below Picture 3.4, then
click “open USB storage configuration”.
4. Now the USB is connected successfully.
R
home page
14
Picture 3.7
Copy the document into memory card
1. Connect the MID to computer with USB cable.
2. As MID storage configuration, it is connected with computer successfully.
3. Open the “My computer” in your computer, check the items in “removable disc”.
4. Copy the documents you need into “removable disc”.
5. After copying finishes, click “shutdown the USB storage configuration” to uninstall.
Notice: When the MID is connected with USB cable, and you open the USB storage
conf igur atio n, you can’t view t he me mory c ard t hrou gh the M ID. Onl y afte r you detac h the
USB cable, you can view the memory card in the MID.
3.8 Typing word s
Use the screen keyboard
When you start the procedure or choose the words or numbers edition, it will show the screen
keyboard. The keyboard contains below typing options:
1. An droi d ke yboard
2. Google Pinyin
15
1
2
3
4
5
①②③⑤④
Choose the typing method you want
1. Click Setting pocedure application.
2. Click Language and Keyboard.
3. In the text setting area will reveal all the installed words-typing methods in your MID.
4. Tick the typing method you want.
Use and switch of input method
Picture 3.8
switch the capital and small letter
switch th e mo d e of words i n p ut
click to insert the space
click input to execute
delete the character in the left of cur s or, cl ic k a nd hol d t o de l et e a ll t he
characters in the left og the cursor.
16
3.9 Operation Technique
Enter widgets interface
In the a ppli c at io n int er fa ce ,cl i ck wi dg ets on t he a b ove o f sc re en, or s li de t he sc re e n, i t
will swtich into widgets interface. Long press a ny widget to creat e its sh ortcut, then
you can enter into the application through the shortcut icon.
Create application shortcut icons in the desktop
In the application interface or widgets i nterface, long press any icon to s witch into
deskt op aut omat ically, drag a nd hold t he icon, you ca n move t o any pos ition i n the
desktop.
Remind: If the target position has no space, the widget won’t be add in the main
screen.
17
4 Basic Setting
4.1 SIM M anagement
4.1-1 Voice call
Click settings in main menu, choose SIM Management, as Picture 4.1
Picture 4.1
Click voice call, choose defaulted SIM card, as Picture 4.2
Picture 4.2
4.1-2 V ideo Call
Click setti ngs in main menu, choose SIM Management, and cli ck video call, choose defaulted
SIM card when makes video call, as Picture 4.3
18
Picture 4.3
4.1-3 Message
Click settings in main menu, choose SIM Management, click message, choose the defaulted SIM
card when sends message, as Picture 4.4
Picture 4.4
4.1-4 Data Connection
Click setting application in main menu, choose SI M manage ment, cl ick dat a connec tion, c hoose
the defaulted SIM card, as Picture 4.5
Picture 4.5
4.2 Wireless and Internet
1. Connect Wi-Fi
1) In the main menu or interface, choose setting applic a t i o n procedur e.
2) Click WLAN, open wifi, MID will automatically search the available Wifi
wireless internet. As Picture 4.6
19
3) Cho ose t he Wi-Fi internet you want to connect, if it has password, it will popup the
password window, enter password, click connect.
Picture 4.6
2. Add Network
1) Click icon in right top, as Picture 4.7
Picture 4.7
2) Input network SSID, the wireless network name, click save.
3) Click user name already saved, click connect to use network, as Picture 4.8
20
Picture 4.8
3. Network Notice
If you open Network Notice, when WIFI signal appears, the right bottom will
remind you available WLAN network, as Picture 4.6
4. Keep WI-FI on during sleep..
1. Click icon in right top of Picture 4.8, select advanced.
2. Click Keep WI-FI on during sleep, as Picture 4.9
Picture 4.9
4.3 Bluetooth
Bluetooth function operatio n
1. Click setting application in main menu interface
2. Click bluetooth and open it.
21
3. If somebody open bluetooth in your surroudings, click search de vice i n righ t above ,
then MID will automatically search the bluetooth device nearby. As picture 4.10
Picture 4.10
4. Click the available Bluetooth device, it will popup request window, enter into related
password, and match the device to connect.
5. After match successfully, choose the operation you want to, click to e nte r i nto
Picture 4.11.
Picture 4.11
Bluetooth setting
1. Rename tablet
Click icon in right top of Picture 4.10, as Picture 4.12, select rename tablet, you
can rename it as you want
22
Picture 4.12
2. Check visibility timeout
Select visibility timeout setting in Picture 4.12, choose the time you want to
set, as Picture 4.13(Note: check overtime setting is the time setting when
Bluetooth is checked)
Picture 4.13
3 Display the file you received
Choose display the file you received in Picture 4.12, you can view download
and upload f il e s.
4. Bluetooth advanced setting
Choose Bluetooth advanced setting in Picture 4.12, enter into Picture 4.14
23
Picture 4.14
1. File transmission,
Open file transmission service, Connect Bluetooth FTP and customer device to visit and operate
the file.
2. Bluetooth distance induction device
Open Bluetooth dist ance induction device, when two Bluetooth devices distance is quite
far or connection is cut off, the Bluetooth will remind you with sound.
4.4 Data Usage
Check SIM card data usage, as Picture 4.15
24
Picture 4.15
Check WIFI data usage
Click
icon in right top of Picture 4.15, click Data Usage, as Picture 4.16
25
Picture 4.16
4.5 More
4.5-1 Airplane Mode
Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is
turn ed on, W IF I an d GS M ca n’t ge t a n y si gna l, t he n ai rp la ne mod e i s t ur ne d off , W IF I a nd G SM
module will recover to previous state.
4.5-2 VPN
Open VPN, click add VPN network, as Picture 4.17. Input name and server address, then save.
Picture 4.17
Click VPN, as Picture 4.18, input VPN user name and password, click connect.
26
Picture 4.18
4.5-3 Network sharing and portable hotspots
Portable WI-FI hot spot s
1. Click setting application in ma i n menu.
2. Click more when wifi is well connected, open network share and portable hotspot
Picture 4.19
27
Picture 4.20
3. Click keep WI-FI hotspots on, choose open time.
4. Return to previous menu, open portable WLAN hotspots, click Set up WI-FI
hotspots.
Picture 4.21
5. Set passwords you want to, password should be more than 8 numbers.
4.5-4 Mobil e Networks
1. 3G service
Click 3G service, as Picture 4.22, choose available defaulted SIM card, GSM is 2G network,
WCDMA is 3G network.
28
Picture 4.22
2. Access Point Name( APN)
Click mobile network, as Picture 4.23
Picture 4.23
Choose ac c e ss p oints name (APN ), cho os e SIM ca rd you need to connect,
Choose connect type, as Picture 4.24
29
Picture 4.24
Remark: (CMWAP transmitters da t a t hr o ug h GPRS, the we bpage it vi s it be l on gs to wap web page,
and CMNET support www browse mobile phone network, it can also log in webpage in computer.
And the charges are also different.)
3. Network Operator
Clic k ne t wor k op er at or, c ho ose S IM ca rd y ou ne ed t o co nne ct , s ys te m wi ll s ea rc h ava il a ble GS M
and WCDMA network, as Picture 4.25
Picture 4.25
30
4.5-5 GPRS data prior mode
After Open GPRS data prior mode, systems will priority chooses your network.
4.6 Contextual Model
1. Open settings, click contextual model, as Picture 4.26,
Picture 4.26
2. Click standard to enter into Picture 4.27
Picture 4.27
1. Vibrate
In picture 4.27, click vibrate, MID will vibrate when someone calls you.
2. Volume
In picture 4.27, click volume, you can set ringtone, notice, and alarm volume, as Picture 4.28
31
Picture 4.28
3. V oice call Ringtone
In picture 4.27, click voice call ringtone to choose voice call ringtone, as Picture
4.29
Picture 4.29
4. Video call ringtone
In Picture 4.27, click video call ringtone to choose video call ringtone, as Picture 4.30
32
Picture 4.30
(Note: Except standard, silent, meet, outdoor are only for selection, they can’t be set.)
4.7 Display
4.7-1 Adjust the screen brightness
1 . Click Setting appli cati o n proce d ure.
2. Click display, choose brightness,
3. Drag the portlito to adjust the brightness volume.As Picture 4.31
Picture 4.31
4. Click OK after brightness is adjusted.
4.7-2 Wallpapers
1. Click setting application.
2. Click display, click wallpaper.
33
3. You can choose different wallpapers as you like—live wallpapers---gallery(user
defined)---wallpapers (system defect)---video wallpaper , as Picture 4.32
Picture 4.32
4.7-3 Auto rotation
Syste m i s de fault e d a s op e n auto rota t i o n, when it is t urned off, system won’t rotate MID
screen by G-sensor.
4.7-4 Sleep
1. Click setting appliation.
2. Cli c k di spla y.
3. Click sleep.
4. Set the sleep time as you want, as Picture 4.33
Picture 4.33
4.7-5 Font size
34
Click font size to adjust the font size, as Picture 4.34
Picture 4.34
4.8 Storage
Open setting function, click memory, click preferred install location, you can
choose isnta ll new application to choose preferred insta ll location.
Check SD card and MID stor ag e space.
1. Enter into s etting application.
2. Click storage, check storage space.
1. Internal storage
(1) System storage
System storage is the spcae MID leave for system file, as
Picture 4.3 8. it can’t be viewed.
35
Picture 4.38
(2)Internal storage
Inter nal st orage is MID l oca l NAN D st ora ge, as Pi ctur e 4 .39 , if you nee d to c hec k the s tor age
content, you can check it in main menu.
Picture 4.39
2. SD card
You can check storage space, SD card available space, unmount SD card and erease
SD card, as Picture 4.40
36
Picture 4.40
Safely remove SD card
1. Click setting application.
2. Clic k memory.
3. Click uninstall SD card.
4. Now you can remove SD card safely.
Note: Removing SD card safely can protect SD card and increase its lifetime.
4.9 Battery
Click setting function, select battery, you can view the battery situation, as Picture 4.41
Picture 4.41
4.10 Applicati on progra m
1. Click setting application in Apps.
37
2. Select a ppli c at io n, a fte r e nt er , y ou ca n mana ge an d de l ete ins ta ll ed a p pli ca tion and
check system used storage space and left space. (As Picture 4.42)
Picture 4.42
3. View internal storage used space and left space, as Picture 4.43
Picture 4.43
4. View the working device, used space and available space, as Picture 4.44
38
Picture 4.44
4.11 Acco unt and Sync
1. Select setting application
2. Open account and sync, as Picture 4.45
Picture 4.45
3. Click add an account, as Picture 4.46
39
Picture 4.46
4. After successfully load, it will open the sync function, as Picture 4.47
Picture 4.47
4.12 Locatio n service
Click setting, select Mode, as Picture 4.48
40
Picture 4.48
4.13 Safety settin g
Set locked screen
Lock the touch screen by unlock icon or password to protect your MID.
Note: After setting screen locked, you should enter the passcode each time when you
startup or screen is locked
Set unlocked picture
1. Click setting application in main interface.
2. Click safe.
3. Click locked the screen.
4. Choose picture in text setting area.
5. Cl i c k ne x t f o llowi n g t he r e mind me ss age.
6. The unlocked pattern board pop up, there are nine touch spots, connect 4
points from vertical, horizontal or diagonal direction. As Picture 4.10, move
your finger fr om the scre en when finis h. The sys tem wil l record yous new
unlock pat t ern.
7. Click continue.
8. When you see the reminder, enter the unlock pattern, then click confirm.
41
Set unlock PIN code
1. Click setting application in main interface.
2. Click safe.
3. Click screen locked.
4. Choose PIN in text setting area.
5. Enter new PIN code(numbers) and click continue.
6. Ener new PIN code again and click confirm.
Set unlock password
1. Click setting application in main interface.
2. Click safe.
3. Click screen locked.
4. Set password in text seting area.
5. Set new pas s word( le tters and numbers) and then click continue.
6. Enter the password again and the click confirm.
Picture 4.53
Unknown source
1. In main interface, click setting.
2. Click safety.
3. Click unknown source,as Picture 4.54
42
Picture 4.54
Note: Manual installing APK files needs to turn on unknown source.
4.14 Language and Input Method
Click setting, select language and input method, choose language to switch language, as
Picture 4.55
Click setting, choose language and input, choose A ndroid keyboard setting, click input
language, as Picture 4.56
43
Picture 4.56
Choose the language you want to change in the language list, as Picture 4.57
Picture 4.57
4.15 Backup and Reset
Connect WIFI and login your google account, choose backup my da ta , system will backup
your data into google server.
If you need to recovery factory reset, please click reset, as Picture 4.59, if you need to
formulate NAND, please click reset tablet.
44
Picture 4.59
4.16 Date and Time
According to the preset, system will voluntorily apply the date, zone, and time provided by
internet.
Manual set date, time and zone
1． Click Setting application procedure.
2． Slide d ow n the screen, then click date and time.
3． Tur n of f “auto setting of date and time”.
4． Tur n of f “auto setting zone’.
5． Click Zone Selecting, then choose the zone lists. Slide down the list to view more
zones.
6． Click Date setting, then click upper or down buton to adjust date, mont h, and year,
click setting when you finish selection.
7． Click Time setting, th en cli ck up per or dow n butt on to adjust hour and minut e, cli ck
AM or PM to c hange mornin g or aft ernoo n ( ther e is no s uch se lecti on when you se
24-hour format). Click Setting to finis h.
8． Click 24-hour format, switch between 12-hour or 24-hour formay, the time format you
choos e wi ll b e used on th e a larm cl oc k.
9． Click date format setting, then choose the time format you want to show on MID.
45
Click it into
Click it into
urn on/off
Picture 4.60
Note: If you use the time internet provided, you will not able to set the date, time and time zone.
4.17 Fixed-t i me Startup and Shutdown
1. Click Setting appl icat i o n pr o c e d ure
2. Click fixed-tine startup and shutdown.
3. Operate as below Picture 4.61
fixed-time
startup
setting
fixed-time
shutdown
setting
T
fixed-time
startup
Turn
on/off
fixed-time
shutdown
Picture 4.61
46
4.18 Assisstance Function
4.18-1. Large size
Click it to make system font large size
4.18-2. Click power button to end calls
When Click call, press “power” button, call will end but not h old.
4.18-3. Touch and hold delay
Click touch and hold delay to increae time, as Picture 4.62
Picture 4.62
4.18-4 Install webpage script
It will allow you insta ll webpage scrip when you open system,, b ut it will i ncrease the r isk
when you are browsing webpage.
4.19 Engineer Selection
4.19-1 USB adjustment
After ope ning USB a djustme nt, you can us e some softwa re to rea d MID software, but when
USB adjustment is turned on, USB storage needs to manual adjust.
4.19-2 Keep awaken state
If you open keep awaken state, it wll never auto sleep when your MID is charging.
4.19-3 Pointer Location
If you open pointer location, it will display touch vertical and horizontal direction.
4.19-4 Show touches
If yo u open d ispla y touch scre en operation, it will dis play tou ch opeati on on the scre en. It is
suggested to use with same direction as pointer location.
47
4.19-5 Show screen update
If you open screen refresh, it will display related area when the area is refreshing.
4.19-6 Show CPU usage
After open CUP usage, in the right top of MID will show CPU usage situation.as Picture 4.63
Picture 4.63
4.20 Abou t Tablet
Check MID state
1. Check Setting application.
2. Click abo ut tablet, che ck state message, model, Android version, version
No and so on.
3. Click state message, check battery state, battery volumne, SIM state,
IMEI number, IP address.
48
Album
Artist
Album
5 Multi-Media
5.1 Music
Enter i nto mu si c player: in me n u or des k t o p clic k mus i c i co n to e nte r i nto mus i c pl ayer,
click the music you want to play, as Picture 5.1:
Song name
Picture 5.1
Rand o m play
Pause/play
Next song Previous song
49
mode
Play/pause
Picture 5.2
Drag the progress bar to adjust play progress.
Operation of music player button as Picture 5.2
5.2 Video
Enter video player: choos e application in main menu, choose the vi de o you wa nt
to play.
Operation of video player button as Picture 5.3
Adjust
play
progress
Choose
the
screen
Picture 5.3
5.3 Photo Gallery
Photo gallery a pplic ati on ca n a uto s ear ch p hotos an d vi deo fi les in S D ca rd, a nd phot o
gallery wil l classify these ph otos and vi deos in fol der. Y ou can ap ply ph oto gall ery to
view and edit photos, set the photos as wallpaper and watch the video.
View pictures
1. Click galle r y ap plicati on i n ma in inte r f a c e .
2. Enter i nto gal l ery, cl ick the f older yo u wa nt t o view.
3. Click the picture you want to view, the system will play it in full screen mode
automatically.
4. The pi c t ures can be zoo m in an d zoom o ut , pu t two finge r s on the s c r e e n, t h e
50
separete the fingers(gather up the fingers, the picture will be zoom in) or
double click the screen.
Note: w hen you browse the pictures, slide left or right to view more pictures.
Edit and set pictures
When check the pictures in full screen mode, click menu key to display menu
selection, you can choose the selection you need to edit and setting pictures.
Slide Show
1. Open a picture, use virtual key to click menu key, display menu selection.
2. Click slide show, it will auto loop play(or choose
pict ur e f older)
Crop
1. Click menu key to display menu selection.
2. Then click crop, click and drag related area to adjust the cropper.
3. Click cropper and drag it inside and outside to adjust the image.
4. After adjust the size you want, click crop.
5. If you wish to give up to crop, click cancel to return to picture browse.
Edit
1. Click menu key, display the menu selection.
2. Click edit.
3. Adjust teh brightness, style, color, antialias setting in selection.
4. Click save.
5. If you want to give up edit, click return key, click not to return to picture
browse.
button in
5.4 Camera
In the main interface or desktop, click camera application pro c e d ure , enter into camera
Operation of camera ,Switch camera: choose Menu key, click switch front/back
camera, as Picture 5.4
51
pictures and
Full screen play
camera shootin
Sub menu
View the
normalCamera
5.5 FM Radio
videos
Switch
front/back
Click it to take
pictures
mode
Picture 5.4
Click in the main interface or desktop to enter into FM radio inter face:
Radio button operation instruction as Picture 5.5:
52
Open speaker
Play/pause
Next channel
Exit FM
Save
button
Current
frequency
Previous
channel
Picture 5.5
53
Save channels: Click button in the main interface to save the
channe l, and the c hannel will be s aved in chan nels list .
Note: You need to insert earphone as antenna when using FM radio, If no
antenna, your MID can’t se a rch any fr e quency band .
54
6 Communication Function
6.1 Phone
1 Click Phone application procedure
2 Operate as Picture 6.1
55
The area of
dial phone
Display
phone
numbers
Call history
Dial phone
numbers
Picture 6.1
6.2 Text Messa ge
1 Enter into main menu, choose appl i cati on proc ed ure.
Function
key
56
irectly input
message
2 Click “Edit new message”
Menu(discard,insert
text and settings)
D
phone number
Add receiver
Send
Picture 6.2
6.3 Contact List
Click Contact list in the main interface, enter into the contact list as Picture 6.3
57
Picture 6.3
Search contact: click but ton, enter into s e arch function
Add contact: click button, enter into add co nt act interface.
58
7 Internet
7.1 Browser
In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and
internet setting), click IE browser in the mai n me nu or des kt o p to e nt er t he IE i nt erf ac e, a s
Picture 7.1
Address
column
Save bookmark
menu
Picture 7.1
Click address bar to input the website, click start, enter into related webpage, then you can browse
the website information, as Picture 7.1.2 and you can click the menu you can refresh ,save to
bookmarks,,share page,bookmarks,,history and setting the webpage.
59
Picture7.1.2
7.2 Email
Email application procedure contai ns email s etting guide, you can add the external POP3 OR
IMAP email account of normal web email service provider (For instance, Yahoo, Gmail, Hotmail
and 163),as Picture 7.2
60
a. Email Setting
1． After y ou click th e sendi ng e mail i con
which can help you to set.
2． Input your email address and password.
3． Click “Next step” button, choose your email type is POP3 or IMAP.
4． Click “Next Step” butt on to ch eck whe ther th e email box ser vicer ca n rece ive or
send emails
5． Input the email account and display the email subiject, and click finish.
6． If the email box is available, you will enter into your mail box automatically.
b. Delete the email account
You can delete setted POP3 or IMAP email account from your MID.
Picture 7.2
, you can see the email setting guide,
Click
。
1. Enter into your mail box.
2. Press Menu key.
3. Click Account
4. Press the account you want to delete.
5. Click confirm to remove.
61
Click it and
c. Send E-mail
1． Click to display your mail box.
2． Click the inbox, it will refresh the new emails automatically; click it to read new
email.
3． Press Menu key. Menus will popup.
4． Click Edit to enter into new email editing interface.
5． Input the receiver’s email address.
6． Input the subject and email content.
7． If you want to add attachment, click menu key, the menu popup.
8． Click “Attach file” (photo,music, video,contacts).
9． Click “send” to se n d t he email o ut .
Add
attachment
Picture 7.3
62
Set alarm
8 Other Application Procedures
8.1 Clock
Click Clock procedure, enter into below interface as Picture 9.1.
There are clock, picture, music and homepage buttons.
8.2 Calculator
1. Click .
2. Enter into the basic board of calculator.
3. Soft touch the numbers or operator in calulator to calculate.
Picture 8.1
63
RAM
External
SD card
Pictuer8.2
8.3 File Manager
File ma nager will c o py, cut, d el e t e, rename th e do c u ments or t h e f older in the TF car d, it also will
share the files, install apk etc.
In the ma in men u or deskt op, cli ck the docume nt ma nager icon
manager.
to e nte r in to d ocume nts
64
Picture8.3
a、Copy, cut, dele te, r ename the f iles a nd f older : ch oose t he fi le or fol der, l ong pr esst he fil e or
folder to enter into the interface as Picture 9.4, you can operate the file or folder.
Picture8.4
b、Pas te the c opy or c ut file : choos e the f ile y ou want to past e, cho ose rig ht top
enter into Picture 9.5, choose right top
icon to enter into Picture 9.6
icon to
65
Picture8.5
Picture 8.6
C. Shar e fil e:choose a ny file, long press it, it will popup “share”, choose the share way you want
in the list
66
d、Install apk file：Choos e t h e fi l e suff ix ed .a p k in th e file ma nager , y o u can ins t a l l t h e t hi rd part
software as reminder.
e、Build n ew folde r: Cho ose the men u you w ant t o buil d the file , cli ck
choos e n ew folde r, y ou c a n b ui l d new fol d e r as r emi n d er.
ico n in r ight t op,
9.4 Recorder
In the main interface or desktop, click recorder icon to enter into record interface, click
record ke y t o st a rt rec or d. C li ck Stop k e y to stop recording. Click Play key
to play the recorded sound. The system will auto remind you to use or abandon this record, please
choose it manuall y.
Play the record: choose the video player to play the recorded sound, choose the recorded sound in
the source manager, a nd click it to play.
Picture8.8
67
9 Installation of Procedures
9.1 Installation
Install the third party application procedure
1. Clic k “ file mana ger ” a pplica ti on pr oce dur e; c hoos e t he ap plica ti on pr oce dur e
you need to install.
2. H old t h e ap pl icat i o n pr o c e d ur e y ou n eed to ins t a l l .
3. It popup install, click install apk.
4. Finish the installation as guide, it will operate.
Note: The third party procedure searched from internet to use on the system are all suffixed
with .apk.
9.2 Uninstall
Uninstall application procedure
1. Click setting icon in main interface.
2. Click manage application procedure, list all the application procedures
insralled in the system.
3. Click the APK you want to uninstall, click uninstall.
4. Click confirm to finish uninstallation.
Skill : The proced ure mana ger i nstall ed by s yste m has ma ny convi nent me thods to uni nstal
after opening procedure manager, click uninstall, it will list all the application procedures
installed by system.
68
10 Troubles Shooting
1. The first startup of MID is slow
After the MID syst em u pgrade d, t he fir st st art up nee d to i nstal l the pre-installed
applicat i o n softwares, t he lea d t i me is aro un d 2 -3 minute s, the s tart u p a f t e r wards
will be much quicker.
2. MID can’t connect Wi-Fi
Make sure the wireless router of internet service can work in normal.
Ensure the M ID a n d wi rel ess router in certa i n dis ta nc e, a n d no wal l or oth er
barrier between them.
Ens ur e th e us er name and pas s w ord bot h c orrec t .
3. MID feels hot
When many ap plica tio n proce dures are us ed in mea nwhi le, or the br ight ness o f
screen open to the lightest or under charging, MID may feel fever. It is normal.
4. Email can’t be set or Registeration of application procedure.
Ens ur e y o ur i nte rnet is we l l conn ec t ed.
Make sure your email setting way is correct.
Keep your system time and local time consitent.
5. The system is abnormal and can’t work.
When yo u ins ta ll so me t hir d pa r ty a pp lic at i on pr oc ed ure , it may ca us e a bn or mal
work, y ou c a n press Reset key(next to power port) to reset the system.
6. The webpage can’t be opened
Please keep the distance between from route to MID in effective range.
Please restart WIFI and try again.
7. MID works terribly slow sometimes
It is normal phenomenon. Please turn off some application you don’t nee d
in advanced task management, or uninstall some third party application to release more system
resource.
69
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless tablet is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits fo r exposure to radiofrequency (RF) energy set by the
Federal Communications Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The tablet employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit set by th e F CC is 1. 6 W/kg. * Tests
for SAR are conducted with the tablet transmitting at its highest certified powe r level in all
tested frequency bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the tablet while operating can be well below the maximum
value. This is because the tablet is designed to operate at multiple power levels so a s to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output. Before tablet is available for
sale to the public, it must be tested and certified to the FCC that it does not exceed the
70
limit established by the government adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR value for this tablet when tested for use at the
ear is 0.542 W/Kg and when worn on the body, as described in this user guide, is 0.974
W/Kg (Body-worn measurements differ among tablet models, depending upon available
accessories and FCC requirements). While there may be differences between the SAR
levels of various phones and at various positions, they all meet the government
requirement for safe exposure. The FCC has granted an Equipment Authorization for t his
model tablet with all reported SAR levels evaluated as i n compliance with the FCC
RFexposure guidelines. SAR information on this m odel tablet is on file with the FCC and
can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after
searching on FCC ID: RAFCX9008 Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications
Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States
and Canada, the SAR limit for tablets used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a sub-stantial m argin of safety
to give additional protection for the public and to account for any variations in
measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 15mm must be maintained between the
user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and
similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the supplied or an approved
antenna.
Loading...