XMG P705 Servise Manual

Preface

V

Preface

Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:

1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.

2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating element. This
is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.

3. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save
your work. Remember to periodically save your data as data may be lost if the battery is depleted.

Do not expose the computer
to any shock or vibration.

Do not place it on an unstable
surface.

Do not place anything heavy
on the computer.

Do not expose it to excessive
heat or direct sunlight.

Do not leave it in a place
where foreign matter or mois­ture may affect the system.

Don’t use or store the com­puter in a humid environment.

Do not place the computer on
any surface which will block
the vents.

Do not turn off the power
until you properly shut down
all programs.

Do not turn off any peripheral
devices when the computer is
on.

Do not disassemble the com­puter by yourself.

Perform routine maintenance
on your computer.

Preface

VI

Preface

4. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong mag­netic fields. These can hinder proper performance and damage your data.

5. Take care when using peripheral devices.

Power Safety

The computer has specific power requirements:

• Only use a power adapter approved for use with this computer.

• Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are
unsure of your local power specifications, consult your service representative or local power company.

• The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do
not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.

• When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire.

• Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.

• Before cleaning the computer, make sure it is disconnected from any external power supplies.

Use only approved brands of
peripherals.

Unplug the power cord before
attaching peripheral devices.

Do not plug in the power
cord if you are wet.

Do not use the power cord if
it is broken.

Do not place heavy objects
on the power cord.



Power Safety

Warning

Before you undertake
any upgrade proce­dures, make sure that
you have turned off the
power, and discon­nected all peripherals
and cables (including
telephone lines and
power cord). It is advis­able to also remove
your battery in order to
prevent accidentally
turning the machine
on.

Preface

VII

Preface

Battery Precautions

• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.

• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the
computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.

• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.

• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service
personnel.

• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode
or leak if exposed to fire, or improperly handled or discarded.

• Keep the battery away from metal appliances.

• Affix tape to the battery contacts before disposing of the battery.

• Do not touch the battery contacts with your hands or metal objects.

Battery Guidelines

The following can also apply to any backup batteries you may have.

• If you do not use the battery for an extended period, then remove the battery from the computer for storage.

• Before removing the battery for storage charge it to 60% - 70%.

• Check stored batteries at least every 3 months and charge them to 60% - 70%.



Battery Disposal

The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under var­ious state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste
officials for details in your area for recycling options or proper disposal.

Caution

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Discard used battery according to the manufacturer’s instructions.

Battery Level

Click the battery icon in the taskbar to see the current battery level and charge status. A battery that drops below a level of 10%
will not allow the computer to boot up. Make sure that any battery that drops below 10% is recharged within one week.

Preface

VIII

Preface

Related Documents

You may also need to consult the following manual for additional information:

User’s Manual on CD/DVD
This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro­gram. It also describes the installation and operation of the utility programs provided with the notebook PC.

System Startup

1. Remove all packing materials.

2. Place the computer on a stable surface.

3. Insert the battery and make sure it is locked in position.

4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.

5. Attach the AC/DC adapter to the DC-In jack on the left of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.

6. Use one hand to raise the

lid/LCD to a comfortable viewing angle
(do not exceed 135 degrees); use the other hand (as illustrated in
Figure 1) to support the base of the computer (Note: Never lift the
computer by the lid/LCD).

7. Press the power button to turn the computer “on”.



Shut Down

Note that you should always shut your computer down by
choosing the Shut down command in Windows (see be­low). This will help prevent hard disk or system problems.

Click the icon in the Start Screen and
choose Shut down from the menu.

Or

Right-click the Start button

at the bottom of the Start

Screen or the Desktop and choose Shut down or sign out
> Shut down from the context menu.

135°

Figure 1

Opening the Lid/LCD/

Computer with AC/DC

Adapter Plugged-In

Introduction

1 - 2 Specifications

1.Introduction

Specifications



Latest Specification Information

The specifications listed here are correct at the
time of sending them to the press. Certain items
(particularly processor types/speeds) may be
changed, delayed or updated due to the manu­facturer's release schedule. Check with your
service center for more details.



CPU

The CPU is not a user serviceable part. Ac­cessing the CPU in any way may violate your
warranty.

Processor Options

Intel® Core™ i7 Processor
i7-4980HQ (2.80GHz), i7-4870HQ (2.50GHz), i7-4710HQ
(2.50GHz)

6MB L3 Cache, 22nm, DDR3L-1600MHz, TDP 47W

Core Logic

Intel® HM87 Chipset

BIOS

AMI BIOS (48Mb SPI Flash-ROM)

LCD

17.3" (43.94cm), 16:9, FHD (1920x1080)

Video Ad apter

Intel® Integrated GPU and NVIDIA® Discrete GPU

Supports Microsoft Hybrid Graphics

Intel Integrated GPU

Intel® HD Graphics 5200 (Core i7-4980HQ/i7-4870HQ
CPU Integrated)

Dynamic Frequency (Intel Dynamic Video Memory Technol­ogy for up to 1.7GB)

Microsoft DirectX®11.1 Compatible

Intel® HD Graphics 4600 (Core i7-4710HQ CPU
Integrated)

Dynamic Frequency (Intel Dynamic Video Memory Technol­ogy for up to 1.7GB)

Microsoft DirectX®11.1 Compatible

NVIDIA Discrete GPU

NVIDIA® GeForce GTX 980M

4GB GDDR5 Video RAM

Microsoft DirectX®12 Compatible

Memory

Four 204 Pin SO-DIMM Sockets Supporting DDR3L
1600MHz Memory

(The real memory operating frequency depends on the FSB
of the processor.)

Memory Expandable from 4GB (minimum) up to 32GB
(maximum)

Storage

(Factory Option) Two SATA M.2 2280 SSDs supporting
RAID level 0/1

Or
(Factory Option) One PCIe M.2 2280 SSD

Two Changeable 2.5" (h) SATA (Serial) Hard Disk Drives
(HDDs)/SSDs (1st: 7.0mm (h) & 2nd: 7.0mm/9.5mm (h))
supporting RAID Level 0/1

Security

Security (Kensington® Type) Lock Slot

BIOS Password

(Factory Option) Fingerprint Reader Module

Trusted Platform Module 2.0

Pointing Device

Built-in Touchpad (scrolling key functionality integrated)

Keyboard

Full-size Winkey Illuminated White-LED Keyboard (with
numeric keypad)

Introduction

Specifications 1 - 3

1.Introduction

Audio

High Definition Audio Compliant Interface

S/PDIF Digital Output

Two Speakers

Sound Blaster Audio

ANSP™ 3D sound technology on headphone output

Built-In Array Microphone

Sub-Woofer

Note: External 5.1CH Audio Output Supported by Head­phone, Microphone and S/PDIF Out Jacks

Interface

Three USB 3.0 Ports (Including one AC/DC Powered USB
port)

One eSATA Port (USB 3.0 Port Combined)

One HDMI-Out Port

Two Mini DisplayPorts (1.2)

One S/PDIF Out Jack

One Headphone/Speaker-Out Jack

One Microphone-In Jack

One RJ-45 LAN Jack

One DC-In Jack

Card Reader

Embedded Multi-In-1 Push-Push Card Reader

MMC (MultiMedia Card) / RS MMC

SD (Secure Digital) / Mini SD / SDHC/ SDXC

M.2 Slots

Slot 1 for Combo WLAN and Bluetooth Module

Slot 2 for SATA or PCIe SSD

(Factory Option) Slot 3 for SATA SSD

Communication

Built-In Gigabit Ethernet LAN

2.0M FHD PC Camera Module

WLAN/ Bluetooth M.2 Modules:

(Factory Option) Intel® Wireless-AC 7265 Wireless LAN
(802.11ac) + Bluetooth 4.0

(Factory Option) Intel® Wireless-N 7265 Wireless LAN
(802.11b/g/n) + Bluetooth 4.0

(Factory Option) Intel® Wireless-AC 3160 Wireless LAN
(802.11ac) + Bluetooth 4.0

(Factory Option) Third-Party Wireless LAN 802.11b/g/n +
Bluetooth 4.0

(Factory Option) Third-Party Wireless LAN 802.11ac +
Bluetooth 4.0

Environmental Spec

Temperature

Operating: 5°C - 35°C

Non-Operating: -20°C - 60°C

Relative Humidity

Operating: 20% - 80%

Non-Operating: 10% - 90%

Power

Embeded 4-Cell Polymer Battery Pack, 60WH

Full Range AC/DC Adapter

AC Input: 100 - 240V, 50 - 60Hz

DC Output: 19.5V, 9.23A or 19V, 9.5A (180W)

Dimensions & Weight

417mm (w) * 287mm (d) * 29.98mm (h)

3.2kg (Barebone with 60WH Battery)

Introduction

1 - 4 External Locator - Top View with LCD Panel Open

1.Introduction

External Locator - Top View with LCD Panel Open

Figure 1

Top View

1. PC Camera

2. *PC Camera LED

*When the PC
camera is in use,
the LED will be
illuminated in red.

3. Built-In
Microphone

4. LCD

5. Power Button

6. Speakers

7. Keyboard

8. Touchpad &
Buttons

9. Fingerprint
Reader (Optional)

5

3

4

6

12

7

8

3

6

9

Introduction

External Locator - Front & Right Side Views 1 - 5

1.Introduction

External Locator - Front & Right Side Views

Figure 2

Front View

1. LED Indicator

Figure 3

Right Side View

1. S/PDIF-Out Jack

2. Microphone-In
Jack

3. Headphone-Out
Jack

4. USB 3.0 Ports

5. Multi-in-1 Card
Reader

6. RJ-45 LAN Jack

7. Security Lock

Slot

FRONT VIEW

1

RIGHT SIDE VIEW

1 2 3

7

4

5

6