XM XMp3 Installation Manual

Car Kit Installation Guide

TM

2 3

Welcome to XM

Thank you for purchasing the XMp3™ Radio Car Kit. This guide walks you through the
installation of your new car kit and helps get yo u set up and listening fast.

What’s in the box?

car cradle

power adapter swivel mountvent mount swivel mount

preparation kit

remote control

audio cable

car antenna

IntroductionTable of Contents

Introduction . . . . . . . . . . . . . . . . . .3

Welcome to XM . . . . . . . . . . . . . . . . . . . . . . . . . 3

What’s in the box?. . . . . . . . . . . . . . . . . . . . . . . 3

Remote control functions . . . . . . . . . . . . . . . 4

Vehicle Installation . . . . . . . . . . . 5

Step 1: Plan the installation. . . . . . . . . . . . . 6

Step 2: Mount the XM car antenna . . . . . . 7

Step 3: Install the swivel or vent mount . 10

Step 4: Connect your XMp3 radio. . . . . . . 12

Step 5: Turning on your XMp3 radio. . . . . 14

Find an FM frequency.. . . . . . . . . . . . . . . . . . 15

Set the line out level. . . . . . . . . . . . . . . . . . . . 17

Aim antenna for best reception. . . . . . . . . 18

Automatic power. . . . . . . . . . . . . . . . . . . . . . . 19

Power o . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Troubleshooting. . . . . . . . . . . . . .21

Product Specs, FCC and IC info,

Warranty . . . . . . . . . . . . . . . . . . . .25

Product Speci cations. . . . . . . . . . . . . . . . . . 26

FCC and IC Statement . . . . . . . . . . . . . . . . . . 27

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Owner’s record. . . . . . . . . . . . . . . . . . . . . . . . . 30

Patent information . . . . . . . . . . . . . . . . . . . . . 31

Environmental information. . . . . . . . . . . . . 31

4 5

Introduction

Vehicle Installation

Remote Control functions

30-Minute Replay Buttons

Pause and replay up to 30
minutes of live XM broadcast.

Power Button

Record

Record a song or channel.

Arrow Buttons

Select menu entries,
change channels.

Options

TuneSelect, bookmarks,
favourites, auto recording,
and view programs for
channel.

Select/XM Button

Press to confirm selections.

Back

Return to previous screen.
Press and hold to return
to the previous channel.

Jump

Switches between current
channel and previous channel.

Menu

Go to My Music Library,
access advanced features
and configuration options
or info extras information.

Number Keys

Enter a channel directly
or select your favourite
channels.

+ and -

Change channels or control
volume for audio system
(sold separately).

Mute

Silences live, saved songs,
and replayed XM content.

6 7

Step 2: Mount the XM Car Antenna

1. Place the car cradle on the dashboard. You will connect it to the swivel or vent
mount later on.

2. Select a suitable location on the outside of your car for the XM car antenna.
For example, on the roof near the windshield or rear window.

TIP! When selecting a location, consider any accessories that your car has, such as a
luggage rack, and how often you use the accessories. Select a location where the XM car
antenna won’t be covered or blocked as this could interfere with signal reception.

3. Gently place the XM car antenna in the location
you selected. The antenna has a strong magnet
that sticks to any metallic surface.

TIP! Make sure the door does not pinch the cable when closed.
TIP! Always cross the weather seals at the lowest point possible to reduce water leaks.
TIP! Always hand wash or use brushless or touch-free car washes.

6

Vehicle Installation

Step 1: Plan the Installation

Select an area on the dashboard you want to place the car cradle. This is where

you will install the swivel or vent mount.

TIP! An adhesive pad is used to mount the swivel mount to the dashboard. The adhesive
requires 24 hours to cure. Make sure you provide yourself the proper amount of time to
install your car kit. See Step 3: Install the Swivel or Vent Mount for more information.

Determine which connection method you plan to use in order to receive the

XM signal:

Audio Cable (Included)
XM SureConnect (sold separately)
Cassette Adapter (sold separately)
FM Direct Adapter (sold separately)

WARNINGS:

When using this product, it is always important to keep your eyes on the road and hands
on the wheel. Not doing so could result in personal injury, death, and/or damage to your
XMp3 radio, accessories, and/or to your vehicle or other property.

Your XMp3 radio should be placed in your vehicle where it will not interfere with
the function of safety features, e.g., deployment of airbags. Failure to correctly place
your XMp3 radio may result in injury to you or others, if the unit becomes detached
during an accident and/or obstructs the deployment of an airbag.

1.

2.

•

•

•

•

•

•

Magnet

8 9

Next, route the cable from the rear window molding into the weather stripping
around the trunk opening. Run the cable into the trunk and then into the rear
passenger compar tment. Route the cable through the main compartment by tucking
it under the door jam trim or under the carpet and up to the radio.

5

5 Make sure any excess cable does not interfere with vehicle operations.

TIP! Always be careful to include enough slack in your cable to accommodate open doors
or trunk lids. Use things typically found around the home, like electrical tape, to secure
cables in areas so that hinges do not pinch the cable with the door. Hide any excess cable in
the trim.

•

4.

4. Route the cable:

• If you placed the XM car antenna on the front of the vehicle, route the cable
across the top of the windshield. Gently pry up the rubber weather seal
and tuck the cable underneath. Follow the weather seal down the side
of the windshield to the door jam. Tuck the cable into the door jam and
then under the  oormat to the car cradle.

• If you pl aced the XM car antenna on the rear of the vehicle, ro ute the cable
under th e weather seal of the rear window. Tuck the antenna cable aro und
and down th e window to the lowest point, just ab ove the trunk.

Vehicle Installation

10 11

Step 3: Install the swivel or vent mount

You can use either the included swivel mount or vent mount for your XMp3 radio depending
on your vehicle interior.

Installing the swivel mount

CAUTION! The adhesive used with the swivel mount may make it di cult to remove. Do not
install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C)
during installation.

1

1 Locate a  at surface for the mount. Make sure there is ample room for the XM

cradle and radio when installed.

2

2 Clean the sur face with the preparation kit and let it dry thoroughly.

3

Peel o the adhesive liner. Position, press, and hold the swivel mount in place

for 30 seconds.

IMPORTANT! Let the adhesive cure for 24 hours before attaching the XM cradle and
radio to the mount.

4

Turn the swivel to accommodate the XM cradle and radio. Adjust the tension

via the center screw.

Vehicle Installation

You can adjust this screw

to adjust the tension of the

mount with a screwdriver.

To remove, carefully lift the adhesive pad with your  ngers or a spoon. Warming the pad with a
hair dryer for several minutes will help soften the adhesive.

You can reinstall the swivel mount using the extra adhesive pad.

Installing the vent mount

1

1 Locate a vent with horizontal slats

sturdy enough to hold your XM cradle and radio.

2

2 Adjust the clamps to  t your vent.

3

3 Snap the mount onto the vent.

To remove, push the mount into the vent, then lift up.