Xlyne X22A User guide

EN

Instructions for Use

PowerBank X22A 2600mAh

Specifications

1. Charging the PowerBank

2. Charging a Mo

bile Device

Warnings

Guarantee

Questions and Support

Statutory Provisions

Thank you for choosing this battery pack. These instructions for
use must be read before using this device for the first time. Keep
these instructions in a safe and accessible location so that you can
refer to them at any time, should this be required.

This battery pack enables you to power mobile devices* on the go
without a power supply or a power source.

• Integrated lithium-ion battery (2600mAh)

• Input voltage: 5 V / 0.8A

• Output voltage: 5V / 1A

• Weight: 120g

Packaging Contents

• Battery pack (PowerBank) Model: X22A – 2600mAh

• USB / MicroUSB charging cable

• These instructions for use

• Connect the PowerBank to the respective charging source by

means of the microUSB connection (PowerBank) and USB
connection (see image for use with computer and adapter
110V~220V)

Computer with USB port

Adapter 110V~220V

• If the connection is successful, the LED light lights up red

• Once the PowerBank is fully charged, the LED light turns to

blue. Now remove the USB cable

Please note: should the PowerBank not be used for more than 90
days, fully charge it before use

Option A – for devices with microUSB port

• If the device you want to charge is equipped with a microUSB
port, you can use the enclosed cable for charging

• Connect the PowerBank to the device by means of the USB
connection (PowerBank) and microUSB connection (mobile
device)

• The charging status can be seen on the device

Option B – for devices with other connections

• If the device you want to charge has a different connection,
use the charging cable supported by your device. The cable
must, however, have a USB connection to connect it to the
PowerBank

• The charging status can be seen on the device

The red LED light signals that the PowerBank is not
sufficiently charged

 Do not charge the PowerBank while you are charging another

device

 Do not throw the PowerBank into water, burn it or disassemble it
 Do not use the PowerBank in the immediate vicinity of heat

sources (heating, sunlight etc.)

 Do not dent or pierce the integrated battery under any

circumstances

 Do not expose the PowerBank to vibrations or throw it
 Keep the PowerBank out of reach of children or persons who

have not been instructed in its use. Explain the use of a
PowerBank to children in order to ensure that they do not play
with it

 When using external cables of any given length, ensure that you

lay the cable such that there is no risk of tripping

xlyne GmbH accepts no liability or guarantee for damage resulting
from incorrect installation and incorrect use of the PowerBank or
from failure to observe the instructions for use.

Should you have any questions about this product, please contact:

xlyne GmbH
Schöntaler Weg 22-28
58809 Neuenrade
Germany

Tel.: [phone] / 69 07 0
Email: [e-mail]

Devices labelled with this symbol are subject to
European Directive 2002/96/EC. All old batteries and
battery packs must be disposed of separately from
household waste via the relevant state authorities.

This product fulfils the requirements of European
Directive 2004/108/EC. A corresponding declaration
of conformity can be obtained upon request from the
following address:

xlyne GmbH
Schöntaler Weg 22-28
58809 Neuenrade
Germany

Tel.: + 49 23 92 / 69 07 0
E-Mail: [e-mail]

* please contact the manufacturer of the device you wish to charge
in order to find out its supported power consumption. The power
consumption must not exceed the power output (5V direct current)
of this PowerBank as this may lead, for example, to damage to the
PowerBank and your device. You will often find information in the
device handbook and on the device product label.