X-Loupe A500 User Manual

Assay series

A500 User Guide

®

- 1 -

Precautions ........................................................................................................ 2

About “X-Loupe® Portable Microscope Camera” ........................................... 4

Components........................................................................................................ 5

Product Assembly ...............................................................................................7

1 Mounting of Module and Lens ....................................................................7

2 Mounting of Module and Camera .............................................................. 8

Attention/Warning for the Battery Charging .................................................... 9

Notice and Preparation for Micro-Photography ............................................. 10

1 X-Loupe® Basic Setup before using ....................................................... 10

2 Camera Setup before using/while using for Micro Photography .............. 11

Notice and Preparation for Micro-Photography ............................................. 12

Troubleshooting ............................................................................................... 15

How to keep X-Loupe

®

.................................................................................... 16

Unpacking

Before using

Test-Shooting

Upon receiving the product package, please check for every item,

if there is a shortage or merchandise damaged during shipping,

please contact your local distributor ASAP.

Please ensure that you read and understand the safety

precautions. Please refer to product introduction to prevent

product damaged due to mishandling.

Before taking pictures of any important subject, please do the

test-shooting to make sure the X-Loupe® is perfectly normal

without any damage caused by shipping. In case of any problem,

please contact your local distributor immediately.

Contents

【

Attention

】

- 2 - - 3 -

X-Loupe® is protected by the following patents:

In the interest of continually improving products, Lumos Tech. reserves the right to update
or modify information contained in this manual without prior notice.
Product image of this manual is for reference only and actual product appearance may vary.

WARNINGS CAUTION

Please ensure that you read and understand the safety
precautions before using.

To avoid the re, electric shocks, or result in a body severe injury,

please obey the following instructions.

After Reading, Keep the User Guide Handy for Future Reference

Precautions

1. Keep X-loupe® and its accessories away from children and infants. Contact a

doctor if any dangerous situation occurs.

2. Do not aim this product at the Sun or blazed light sources.

Doing so may cause malfunction or damage the image sensor of camera (CCD.)

3. Keep X-Loupe® away from water or other liquids. The usage of damped or

drowned

X-Loupe® could result in re or electric shock. Immediately turn off the power of

X-Loupe® and remove the battery.

4. Keep X-Loupe® away from the heat source, and avoid its exposure to the direct

ame or heat.

5. Do NOT disassemble, alter, or apply heat to the battery. Avoid any severe impacts

which could damage the protective casing of the battery.

6. In case of any contact to the leaked substances from the battery, immediately ush

the contacted skin, face, or cloth with large amount of water and ask for medical

assistance.

7. To avoid the re, explosion, or result in a body injury, please keep battery terminals

away from metal or magnetic materials.

8. Before you discard a battery, please use the insulation tape to cover battery

terminals to avoid direct contact with other object. Contact with metal or magnetic

materials in waste container may result in re, explosions, or body injury. Please

recycle when possible.

If potential hazards are not eliminated, it may result in body injury,
property/ nancial loss, and the malfunction of the product.

The following instructions are also applied to the warning of
unsafe operation.

1. Avoid strong impacts or shocks of the equipment. Be careful NOT bump or
push strongly on the lens.

2. Do NOT use, place or store the equipment in a place with strong sunlight or
high temperature.

3. Avoid using the equipment under the airtight or airless condition; otherwise,

it may result in short circuit, overheating, explosion, re, burns, or other

accidents. High temperature could deform the sharp of casing.

4. If not using the equipment for a long period of time, please remove the battery
from the equipment and the battery charger, and store them in a safe place.
Improper usage of the battery could make the battery exhausted in a short time.

5. Use the included charger to charge the battery. Do not charge the battery

with other branded chargers; otherwise, product breakdown, overheating, re,

electric shock, or body injuries might occur.

6. Before you move the equipment rapidly from a cold place to a hot place, please
place the equipment inside a sealed plastic bag to allow its gradual adaptation
with the ambient temperature. As well as avoid the water condensation which
cause the mechanical problems. Moving the equipment rapidly from cold to hot
temperatures may cause condensation (water droplet) to form in the inside or
on the surface of the equipment.

China

Patent No.

Japan

Patent No.

Taiwan

Patent No.USPatent No.

Germany

Patent No.

1006570
1370475

3139250
3120470

M315354
M292708

US 7,327,526B1
US 7,821,569B2

Nr. 20 2007 014 240.4
Nr. 20 2006 001 999.5

- 4 - - 5 -

About “X-Loupe® Portable Microscope Camera” Components

X-Loupe®, a “Portable Microscope Camera,” is composed of a digital camera and a

microscope module. The objective lenses with different magnications are supplied

to support its utilization under various circumstances. The multiple functions, such as

built-in LED lighting and AF, enhance X-Loupe® to break the limitation of microscopes

that used to conne to the labs. Providing new methods to examine micro subjects,

X-Loupe® make the micro inspections become easier.

For more information and downloading this user guide, please visit our website at

http://www.x-loupe.com

Please read the copying declaration prior to the usage of any part of the content in

the booklet.

Wish you have a wonderful experience on using X-Loupe®.

Digital Still Camera

Microscope module

Objective Lens

《

Structure prole of X-Loupe®

》

Module ( Lens included )

Back

On (Red dot) / Off switch

LED Illumination Control

(White LED)

Interchangeable magnifying lens indicated by color:

60x - Red; 150x - Blue

Battery Cover