X-Keys XK-1719-RPLY-R Users Guide

XKE-64 Jog T-bar USB Controller

Product Manual

Model XK-1669-UXG64-R
64 Keys + Jog & Shuttle + T-bar Fader
Individual Key Backlighting
Designed, Sold, and Supported in USA
From P.I Engineering
USA: www.xkeys.com
UK: www.x-keys-uk.com

Box Contents

This package contains:
1- X-keys XKE-64 Jog T-bar
1- Double key set (2 tall, 1 wide, 1 key puller)
2- Angled feet
4- Legend Sheets (two pre-printed, two blank)
1- Product Manual

Software Development Kits

P.I. Engineering offers a free Software Development Kit with code samples in
C#, C++ and .NET. We also offer an SDK for Linux and Android application
samples. Please visit the Developers section on our website:
xkeys.com/PISupport/Developer.php.

Mac Users

Install ControllerMate for X-keys from the X-keys Mac page in the Software
section of our website (free download). ControllerMate for X-keys is published
by OrderedBytes in partnership with P.I. Engineering. For full programming
instructions and support, please visit

www.orderedbytes.com/controllermate/xkeys/.

Support

Should you encounter difficulty with the installation or programming, please
check the SDK or ControllerMate help files or check the troubleshooting guide
on our web site. You may also contact technical support.

USA: [e-mail] | Phone: [phone]
UK: [e-mail] | Tel [phone]

Identifying the Keys

Select appropriate icons or use the blank legend sheet to create your own key
legends. The keycaps snap off with a fingernail or small screwdriver. Apply
the label under the keycap, and replace it. The key caps hold a legend 0.575"
wide and 0.5" high (14.6mm x 12.7mm). Other options are available for
printing legends for multiple units. Contact our Sales Department
([e-mail]) for more information.

Tall and Wide Double-keys

The included double-keys replace two single keys on the X-keys. To install a
double key cap, remove two adjacent keys with the provided key-puller. Press
the double-key in place over the two exposed switch stems. See more
information in the SDK help files regarding special handling of large keys.

Key Blockers

Replace any key or group of keys with optional key blockers by simply
removing the key caps and snapping a blocker over the exposed stem. We
recommend removing the key plunger when installing blockers.

Light Pipe Key Blockers

A special key blocker with a light pipe is available to convert X-keys
backlighting LEDs into indicators. Blockers with single and double light pipes
allow the user to configure a red or blue indicator or one of each. The key
plunger must be removed before installing a light pipe blocker.

Backlighting

All keys on the XKE-124 have two backlighting colors (red and blue). Both the
SDK and ControllerMate enable individual manipulation of the LEDs. The SDK
also grants ability to adjust the intensity of each bank.

Compatible Accessories

Please visit the Accessories page on our website for details on the following.

X-keys USB Extender – up to 150 feet via CAT 5 cable
Tall and wide keycaps
Colored and transparent key caps
Blank key blockers
Light pipe key blockers
Acrylic printed keys

Other Products from P.I. Engineering

X-keys XK-24/XK-60/XK-80 – 24, 60 or 80 programmable keys
X-keys XKE-128 – 128 programmable keys
X-keys XKE-124 T-bar – 124 keys with embedded T-bar fader
X-keys XKE-40 – 40 programmable keys with optional rack mount
X-keys XK-12 Joystick – 12 keys with a precision joystick
X-keys XK-12 Jog & Shuttle – 12 keys with jog & shuttle
X-keys XK-3 Foot Pedal – three programmable pedals
X-keys XK-4 Stick – four programmable keys
X-keys XK-8 Stick – eight programmable keys
X-keys XK-16 Stick – sixteen programmable keys
X-keys XK-68 Joystick - 68 keys with a precision joystick
X-keys XK-68 Jog & Shuttle – 68 keys with jog & shuttle
X-keys USB 12 Switch Interface – 12 switch ports
X-keys USB 3 Switch Interface – 3 switch ports
X-keys Encoder Board – 128 switch points

FCC Declaration of Conformity

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and the receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio TV technician for help.

Any changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.

CE Declaration of Conformity

We, P.I. Engineering, Inc., declare that the X-keys is in conformance with:

 EMC Directive 2014/30/EU, tested in accordance with EN 55032:2012 and

55024:2010/A1:2015

 Certificate of compliance on file at P.I. Engineering, 101 Innovation Pkwy,

Williamston, MI 48895

Contact Us

USA Sales

[e-mail]

Phone: [phone]

www.xkeys.com

USA Technical Support
[e-mail]

Phone: [phone]

www.xkeys.com/support.php

USA Shipping Address

P.I. Engineering

101 Innovation Parkway

Williamston, MI 48895-

1663

UK Sales

[e-mail]

Tel [phone]

www.x-keys-uk.com

UK Technical Support

www.x-keys-uk.com

[e-mail]

Tel [phone]

UK Shipping Address

Keyboard Specialists Ltd

Unit 44-45, Salisbury

Street Darlaston West

Midlands WS10 8XB

United Kingdom

Limited Warranty

For all X-keys products purchased and installed in the United States, Canada and the United
Kingdom, P.I. Engineering warrants that the X-keys product will be free from defects in materials
and workmanship under normal use and service, and will meet the specifications presented by
P.I. Engineering at the time of original purchase, for one year as evidenced by a copy of the
purchase receipt. Under this warranty, P.I. Engineering will, at its sole option, repair or replace
any X-keys product which is defective, provided that you are responsible for (i) the cost of
transportation of the product to P.I. Engineering or its designated service facility, and (ii) any loss
or damage to the product resulting from such transportation.
Upon discovery of a defect in the product within the Warranty Period, you should notify
P.I. Engineering Technical Support to obtain an RMA (return authorization number) and
instructions for shipping the product to a service location designated by P.I. Engineering. You
should send the product, shipping charges prepaid, to the designated location, accompanied by
the return authorization number, your name, address, and telephone number, proof of purchase,
and a description of the defect. P.I. Engineering will pay for return of product(s) to the customer.

P.I. Engineering shall have no responsibility to repair or replace the X-keys product if the failure
has resulted from accident, abuse, mutilation, misuse, or repair/modification performed by any
entity other than P.I. Engineering.

THIS WARRANTY IS EXCLUSIVE OF ALL OTHER WARRANTIES, WHETHER EXPRESSED, IMPLIED, OR STATUTORY.
P.I. ENGINEERING DOES NOT WARRANT THIS X-keys PRODUCT FOR FITNESS FOR A PARTICULAR PURPOSE OR
MERCHANTABILITY. P.I. ENGINEERING AND ITS EMPLOYEES SHALL NOT BE HELD LIABLE FOR ANY CONSEQUENTIAL,
INDIRECT, OR INCIDENTAL DAMAGES, EVEN IF ADVISED OF THEIR POSSIBILITY, ARISING OUT OF THE USE OR
INABILITY TO USE THIS PRODUCT. SOME STATES DO NOT ALLOW FOR THE EXCLUSION OR LIMITATION OF CERTAIN
LIABILITIES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO STATE.

In the event that the above limitations are held unenforceable, P.I. Engineering’s liability for any damages to you or to any party
shall not exceed the purchase price you paid, regardless of the form of any claim.

This limited warranty is valid for and only applies to products purchased and used inside the United States (and its territories),
Canada, and the United Kingdom.

This limited warranty is governed by the laws of the United States of America and the state of Michigan.

X-keys Electronic design: P.I. Engineering, Inc., Patent # 4964075

© 2019 P.I. Engineering, Inc. All rights reserved.

Y-mouse, Y-see two, Y-key key, X-keys, and the “P.I. Eclipse” are trademarks of P.I. Engineering, Inc.

PS/2 is a registered trademark of International Business Machines, Inc.

All other trademarks are property of their respective owners.

USA: www.piengineering.com ◘ www.xkeys.com

UK: www.x-keys-uk.com

PI Part#1670