X-keys XK-1225-UFK128-R User manual

XKE-128 Programmable Keyboard

Product Manual

Model XK-1225-UFK128-R
128 Keys
Individual Key Backlighting
Designed, Sold, and Supported in USA
From P.I Engineering, The No Slogan Company
www.xkeys.com

Box Contents

This package contains:
1- X-keys XKE-128
1- Installation CD
1- Double key set (2 tall, 1 wide, 1 key puller)
4- Legend Sheets (two pre-printed, two blank)
1- Product Manual

Quick Start for Windows

1. Run the MacroWorks (MW3.1) installation program from the enclosed disc.

2. Plug in the X-keys and wait for Windows to recognize it.

3. Click on the MW3.1 taskbar icon and select the XKE-128 to open the MW3.1

programming window

4. Press any key on the X-keys (or double-click on the key image) to begin

recording a macro.

5. Type text or select keystrokes, shortcut, or function. Multiple lines of

keystrokes, text, shortcuts, and functions may be entered on a single key.

6. Press the key again (or click Save) to complete programming.

7. When finished, click the red “X” in the upper right corner to close the

programming window.

To quickly learn how to use MW3.1 watch the brief tutorials on the disc or on
our website. Consult the MW3.1 help file for complete instructions and tips on
programming and using your X-keys.

Mac Users

Install ControllerMate for X-keys from the enclosed disc or visit the Apple page
in the Software section of our website for a free download. ControllerMate for
X-keys is published by OrderedBytes in partnership with P.I. Engineering. For
full programming instructions and support, please visit
www.orderedbytes.com/controllermate/.

Developers

P.I. Engineering offers a free Software Development Kit with code samples in
C#, C++ and .NET. We also offer an SDK for Linux and Android application
samples. Please visit the Developers section on our website:
xkeys.com/develop.php.

Support

Should you encounter difficulty with the installation or programming, please
open the MW3.1 or ControllerMate Help File or check the troubleshooting
guide on our web site. You may also contact technical support.

USA: [e-mail] | Phone: [phone]
UK: [e-mail] | Tel + 44 (0)1869 338428

Compatibility

X-keys USB devices require MacroWorks 3 for Windows XP, Vista, or 7 or
ControllerMate for Mac OS-X. The X-keys XKE-128 also has a “Hardware
Mode” which gives it the ability to mimic a USB keyboard, mouse, or game
controller (joystick) on any USB enabled operating system (including Linux).
Learn more about Hardware Mode on our web site or contact our Technical
Support Department ([e-mail]).

Identifying the Keys

Select appropriate icons or use the blank legend sheet to create your own key
legends. The keycaps snap off with a fingernail or small screwdriver. Apply
the label under the keycap, and replace it. The key caps hold a legend 0.575"
wide and 0.5" high (14.6mm x 12.7mm). Other options are available for
printing legends for multiple units. Contact our Sales Department
([e-mail]) for more information.

Tall and Wide Double-keys

The included double-keys replace two single keys on the X-keys. To install a
double key cap, remove two adjacent keys with the provided key-puller. Press
the double-key in place over the two exposed switch stems and configure it in
MW3.1 by selecting both keys, right-clicking, and selecting “Apply Large Key”.

Key Blockers

Replace any key or group of keys with optional key blockers by simply
removing the key caps and snapping a blocker over the exposed stem.

Backlighting

All keys on the XKE-128 have two backlighting colors (red and blue) and
advanced programming functions in MW3.1 allow the user to manipulate them.
By default when MW3 recognizes the X-keys, blue backlighting indicates the
unit is ready for operation or programming. If you program a red layer shift or
toggle key, the backlighting will also indicate the active layer.