Xirlink X9901 Users Manual

User Manual

Battery........................................................................................................................................2

Status Panel.................................................................................................................................2

Taking a Picture..........................................................................................................................3

Viewing / Modifying Pictures .....................................................................................................4

Erase The Pictures Stored Inside the Camera ...............................................................................7

Using the Album Application..................................................................................................7

Using the Buttons on the Camera.............................................................................................7

1

Battery

Insert one battery into the compartment as shown

Status Panel

2

Display the abbreviated messages and the counts of picture taken

List of LCD display messages – case sensitive:

1. Po: picture overflow
cause: compressed picture size over the SRAM size (it won't happen in this
camera)

reseult: system soft-reset

2. FL : picture full

cause: picture count meet maximum storage size
result: can't take any more picture

3. FE: flash memory error
cause: hardware error or inappropriate operation(such as shut-down power
while writing flash)

result: may get damaged picture

4. bE: board number error

cause: hardware error
result: dead camera
5: rS: system soft-reset
cause: system time-out for hardware response
result: may cause camera hung (try re-boot camera)