Xinpu XP-G65BH Handling Instructions

Demolition Hammer

Model: XP-G65BH

HANDLING INSTRUCTIONS

With active vibration reducing system

Original Instructions

though these HANDLING INSTRUCTIONS. Ensure that you know how the machine
works, and how it should be operated. Maintain the machine in accordance with the
instructions, and make certain that the machine work correctly, please store this instriation
and other enclosed documents with the machine togeth

Bj:2012

Zhejiang Xinpu Industrial & Commercial Co., Ltd.

106, No. 330 National Road, Huajie Industrial Zone, Yongkang City, Zhejiang 321300, P. R. China

2

Application

This hammer should be applied to breaking concrete, chipping off concrete, grooving, bar cutting,
and driving piles in installation of piping and wiring, unitary facility installation, machinery installation
water supply, and drainage work, interior jobs, harbor facilities and other civil engineering work etc..

Contents

1. Machine information

2. Safety instruction

3. Assembly

4. Operation

5. Maintenance

6. Cleaning

7. W arra nty

7. Warranty

Technical specifications

Machine Type

XP-G65BH
Voltage AC 220-240V
Frequency 50Hz
Input power 2000W
Impact rate 1500/min
Weight 20.2kg

Impact energy 55 J
Bit lock style 28mm hexagon flat shank lock system

Sound pressure values (in
accordance with 2000/14/EC)

105.6dB(A)

Guaranteed Sound power values
(in accordance with 2000/14/EC)

106dB(A)

Vibration

Main handle: a

h,Cheq :

15.340m/s

2

k=1.5m/s

2

Auxiliary handle: a

h,Cheq :

12.028m/s

2

k=1.5 m/s

2

Note: Noise and vibration values are determined acc. to EN 60745-1 and EN 60745-2-6.

Note: The declared vibration value has been measured in accordance with a standard test method and may be

used for comparing one power tool with another.
The declared vibration value may also be used to evaluate the exposure for the user caused by vibration in

advance.

Warning! Depending on the actual use of the power tool the vibration values can differ from the
declared total.

Adopt proper measures to protect yourself against vibration exposures. Take the whole work process
including times the power tool is running under no load or switched off into consideration.

1. Machine information

3

Proper measures include among others regular maintenance and care of the power tool and application
tools, keeping hands warm, periodical breaks and proper planning of work processes.

Standard accessories

Hexagon bar wrench 6mm(for M8) 1 piece
Hexagon bar wrench 5mm(for M6) 1 piece
Hexagon bar wrench 4mm(for M5) 1 piece
Amphibious screwdriver 1 piece
One bottle of grease 60g
Bull point chisel(28*410mm) 1 piece
flat chisel(28*410mm) 1 piece
Carbon brush(7*17*18mm) 1 couple

Optional accessories (sold separately）

Notice: Optional accessories (sold separately) are recommended only for XINPU tool for specified

purpose in manual, any other brand accessories or attachments used may present risk of injury.

1. Bull point Hexagon size28*410 length (Unit: mm)

2. Flat chisel Hexagon size28*410 length (Unit: mm)

3. Cutter Hexagon size28*410 length (Unit: mm)

4

4. Scoop Hexagon size28*410 length (Unit: mm)

5. Bush hammer heads + Shank Hexagon size28*410 length (Unit: mm)

Tooth distance: 12mm
Tooth high: 8mm
Length*width: 60*60mm

6. Tamping plate + Shank Hexagon size28*394 length (Unit: mm)

Length*width: 150*150mm

7. Big flat spade+ Shank Hexagon size28*296 length (Unit: mm)

Length*width: 170*150mm

8. Square spade Hexagon size28*440 length (Unit: mm)

5

9. Lubricate oil one bottle(60g)

In this operator's manual/or machine’s labels following symbols are used:

Read the manual carefully

Accordance with essential applicable safety of European directives

Double insulation

Denote risk of personal injury, loss of life or damage to the tool in case of nonobservance of the

instruction in this manual.

Indicate electrical shock hazard.

Immediately unplug the plug from the main electricity in the case that the cord gets damage
and during maintenance.

Wear ear and eye protection.

Faulty and /or discarded electrical or electronic apparatus have

to be collected at the appropriate recycling location.

The guaranteed Noise Value according to Noise Directive

2. Safety instructions