Xingtel Xiamen Group BT201 Users Manual
Troubleshooting
Symptom
Check&Remedy
Advanced Bluetooth
Wireless Product
Nothing appears
on LCD display
No operation
No LED indicator
Cannot work
25
l
Check that the LCD display is connected to base unit properly.
l
Check that the base unit is connected to cigarette lighter properly.
l
Check that the base unit is connected to cigarette lighter properly.
l
Check that the base unit is turned on.
l
Check the pairing is successful.
l
Check that the base unit is connected to cigarette lighter properly.
l
Check that the base unit is turned on.
l
Power down then up the unit.
BT-201
Care and Maintenance
Contents
Introduction
Feature List
Safety and General Information
Before Using
Package contents
Turning the unit on/off
Installing the unit in a vehicle
Location of Controls
Function Operations
Pairing
Adjusting speaker volume
Adjusting ringer volume
11
11
13
15
Your advanced BT-201 is a product of superior design and should be treated
1
3
4
6
6
7
8
9
with care. The suggestions below will help you to enjoy your product for many
years.
l
Keep the product dry. Precipitation, humidity and all types of liquids or moisture
can contain minerals that will corrode electronic circuits.
l
Do not use or store the product in dusty, dirty areas.
l
Do not attempt to open the product. Non-expert handing may damage it.
l
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
product. Use a clean, soft cloth that is slightly damp to clean the product.
l
If the product won't be used for a long time, remove it form cigarette lighter and
store it with safely protected.
24
Status Indicators
Status
Pairing mode
The Red LED and Blue LED flash alternately.
Indicators
Making a call
Answering a call
Ending a call
Last number redial
Rejecting a call
16
17
18
18
19
Standby mode
Turn on /off the
unit by pressing
MFB
Poweruptheunit
In talk mode
23
The Blue LED flashes per 3 seconds.
The Blue LED flashes 4 times rapidly.
The Red LED and Blue LED flash alternately once, then the
Blue LED flashes 20 times rapidly.
The Blue LED flashes every second.
Caller ID System Operations
Viewing Caller ID numbers
Calling back the last 5 Caller ID numbers
Transferring a call
Status Indicators
Care and Maintenance
Troubleshooting
20
20
21
21
23
24
25
Introduction
Caller ID System Operations
Your Bluetooth wireless product BT-201
The Bluetooth wireless product BT-201 is developed for installation in motor vehicles to
enble handsfree operation of your mobile phone. It is base on Bluetooth wireless
technology connects to a compatible phone without wires. It is easily convert your
mobile phone communication into this in-car solution, talking through its high quality
speaker and microphone.
The product is intended for use with any mobile phones which support handsfree
and(or) headset profile. For the mobile phones which support handsfree and headset
profiles, the BT-201 will try to connect to mobile phone with handsfree profile first, if it
fails, then with headset profile.
each other with headset profile, the following function may be invalid.
LCD display, Voice dialling, Last number redial and rejecting a call.
What is Bluetooth wireless technology
Bluetooth wireless technology propels you into a new dimension in connectivity.
Bluetooth devices communicate without wires, using built-in radio transceivers that
operate on a globally available radio frequency to ensure worldwide compatibility. Your
If your mobile phone and the BT-201 connects to
1
Transferring a call (continued)
3. To transfer back, just press once.
Totransferacallfrommobilephonetotheunit
1. When a call is received, press the reception button in your mobile phone to
answer the call.
2. Press once. Then the call is transferred to the unit, and your mobile phone
3. To transfer back, Press for about 3 seconds and then a confirmation tone
MFB
returns to Standby mode.
will be heard.
MFB
MFB
22
Caller ID System Operations
Introduction
Calling back the last 5 incoming numbers
1. In Standby mode, press or
Volume Down
select the number you want to call
back.
Transferring a call
During a call, the feature allows you to transfer a call from the unit to your mobile phone
or vice versa so that you can accept the call in private or in public conveniently.
To transfer a call from the unit to mobile phone
1. When a call is received, press to answer the call.
2.Press forabout3secondsandthenaconfirmationtonewillbeheard.
MFB
Then the call is transferred to mobile phone, and the unit returns to Standby mode.
button repeatedly to
Volume
Down
Volume Up
Volume
Up
2. Press once to call back.MFB
Press this
button once.
MFB
21
What is Bluetooth wireless technology(continued)
Bluetooth wireless product BT-201 can connect to other Bluetooth devices within a
range of approximate 10 metres.
The wireless connection between the compatible devices established using Bluetooth
technology is free of charge for the user. In some countries, there may be restrictions
on using Bluetooth devices. Check with your local authorities.
2
Loading...