Xingtel Xiamen Group BT129 User Manual

BT-129

Product

Information Guide

Specifications

Bluetooth Compliance

Frequency Band

Modulation

Operating Range

Battery Capacity

Power Supply

Charging Time

Standby Time

Compatibility

Size

Ambient temperature

Humidity

*Design and specifications are subject to change without notice.

Bluetooth V 4.0

2.4~2.4835GHz ISM Spectrum

GFSK (Gaussian Frequency Shift Keying)

Up to 10m (indoor)

3.7 2200mAhV,

5V, 0.5A

About 3 hours

About 120 hours

Mobile phone/device supporting Bluetooth

V1.1 (and above)

141mm*91mm*54mm

-20 ~ 60℃℃

45%~70%

15

Welcome. You are using Waterproof
Bluetooth Speaker.

This guide contains helpful information

that enables you to enjoy all of the features

of your speaker.

Congratulations

Thanks for purchasing the wireless speaker
BT-129.
Enjoy this smart product, please read below instructions
carefully. It's more than just a Bluetooth Speaker!

Care and Maintenance

1.

Do not attempt to service the product yourself. Opening
or removing covers may expose you to dangerous
voltages or other hazards. Please contact your local
reseller before you send the product for repair.

2.

Do not use the product in temperature exceed the
standard. Extreme temperature will lead to damage of
product, decrease of battery capacity or product
durability.

3.

Keep the product out of the reach of children or
animals.

4.

Do not use the product close to other wireless
devices or radiators.

5.

Do not drop the product into the fire, battery
explosion will cause personal injury or death.

6.

Use the product in proper volume, extremely high volume
can be harmful for your ear.

7.

Fully charge the product before use if it has not been
used for a long period of time.

1

Troubleshooting

Volume isnot high enough

Increase the volume of mobile phone/device or BT-129
volume.

Ensure that the mobile phone/device or BT-129 has been
charged.

Hearing Distortion

Lower BT-129, Mobile phone/device volume.
If low battery capacity,please charge it.

Can not pairedwith Bluetooth device

Make sure that your mobile phone/device is compatible with
Bluetooth.

Make sure it's charged up.
Turn off your BT-129 and mobile phone/device, then power

on and reconnect

Signal loss ordistortion

Move BT-129 to the place nearthe mobile phone/device.
Ensure it's charged up.
Power off the BT-129, Mobile phone/Device, then repower

on.

.

14