Xingtel Xiamen Group 3398 Users Manual

801xyyTP227F;CL-3398
USER'SMANUAL
Contents
Prior To Use Basic Functions
Congratulations Safety Precautions Unpacking Phone Layout and Keys Function Keys Description LCD Window Icons Description Connecting Lines Installing Batteries Charging Handset Turning Handset On/Off
10
11
1
Making a call
1
Receiving a call
1
Muting the Microphone
3
Adjusting Voice Volume
4
Ringer Setting
6
Last Number Redial
8
CID Book
9
Key Lock
9
Auto Answer Selecting a Language HS Name Range Alarm Paging Dial Mode Handsfree Flash Signal
12
12 13 14 14 15 16 18 20 21 21 22 22 23 23 24 24
If you subscribe to a DSL service
Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:
- Noise is heard during conversations.
- Caller ID features do not function properly.
To single-line telephone jack
Noise filter
Contents
Advanced Functions
Menu Navigation Menu Map
Phone Book BS Settings HS Settings Registration Calling with more than one
Handset CallerIDoncallwaiting
Feature List
25
25 26 27
30 32 36
37
39
40
Troubleshooting
Technical Specifications
41
42
Prior To Use
n Congratulations
on purchasing our high quality product. Please read the manual carefully to find out all features and how your telephone works, so you can get the best out of your new phone.
n Safety Precautions
To reduce the risk of electrical shock and injury, please follow these basic safety precautions before using the phone.
1. Carefully read and observe the instructions in this manual.
2. Follow all warnings marked on the unit.
3. When cleaning, unplug the phone first, then use a damp cloth to wipe. Do not use liquid or aerosol cleaners.
4. Do not place objects on the line cord that may cause damage.
5. Do not use this phone in wet surroundings or environments where there is a risk of explosion.
6. Avoid spilling of any liquid on the phone.
Technical Specifications
Frequency Range
Channels
Carrier Power
Modulation
Frequency Stability
Charging time
Ambient temperature
Humidity
Dimensions (mm)
Power Supply
Design and specifications are subject to change without notice.
?
1.92~1.93GHz
60 Duplex channels
<100mW
GFSK
<50Khz
15 hours
15 ~ 35 , Extreme: 0 ~ 40
Normal:
0%~90%
Base:110x100x58; 150x50x28Handset:
Base input: 7.5V,300mA;Handsetinput:Ni-MH:1.2V , 600mAh
x2
1
42
Troubleshooting
Symptom
No operation
No dial tone
Nothing appears on the display
Handset seems to have very short battery life
Caller s number
is not displayed
Check that the power adapter is properly connected. Check that the telephone line cord is properly connected. Check that the handset batteries in full power. Check that the handset batteries are installed properly.
Check that the telephone line cord is properly connected. Check that the power adapter is properly connected.
Check that the handset batteries are installed properly. Check that the handset batteries in full power. Check that the handset is on.
Check the charge contacts. Consistently short battery life may indicate that replacementof the batteries is necessary. Make sure the right batteries be used.
Make sure you have subscribed to a Caller ID service via your network provider. The caller may have withheld their details. Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.
Check & Remedy
7. Unplug this phone from the wall outlet and refer servicing to qualified service personnel only.
8. Pay attention to the polarity of the batteries, insert the rechargeable batteries in accordance with polarity symbols (this instruction is found in the installing batteries section.)
9. Use only . Never use other ordinary batteries or conventional alkaline batteries. Otherwise this may not only cause personal injuries but also damage to the unit.
10. Do not mix exhausted batteries with full batteries. Exhausted batteries shall not be disposed of with
the usual household waste or in a fire.
11. If the handset will not be used for a long period of time, remove the batteries to prevent possible
leakage.
12. Use only .
13. Keep the phone out of the reach of children.
14. Use the phone only in the described manner.
15. Stop using the phone if it becomes damaged.
the batteries indicated in the User's Manual
the power supply indicated in the User's Manual
41
2
n Unpacking
Once you have unpacked your phone, make sure that all the parts shown below are available. If any pieces are missing or broken, please promptly call your dealer.
Base
4AAANi-MH batteries
*The shape of the plug can vary according to each country’s specification.
Charger
2 Handsets
User's manual
Line cord*2 Adapters*
Feature List
DECT 6.0 technology 5 row dots matrix LCD display (128 x 64 dots matrix display) Up to 5 handsets for optional for one base Up to 4 bases for optional for one handset LCD contrast adjustable Phonebook with up to 50 entries 9 VIP ring tones setting for phonebook entries Redial book with up to 10 entries 10 melody ringer and volume selectable Key tone ON/OFF selectable Range alarm Full handsfree speakerphone Internal call Call transfer 3-way conference call Receiver/Speaker volume adjustable Mute PIN protection Predialing Redial, Flash, Pause
TONE/PULSE dialing mode selectable FLASH time selectable Call duration display Date & Time setting Keypad lock 8 languages selectable Auto answer ON/OFF selectable Alarm clock include snooze option Handset Name setting Backlit LCD screen and keypad
Caller ID
FSK and DTMF dual system Caller ID Caller ID / Call Waiting Caller ID list with up to 40 entries Incoming calls can be called back/added to phonebook/deleted Message waiting
Note:
The caller ID feature is only available if you subscribe to a Caller Display service from your network provider.
3
40
n Caller ID on call waiting
n Phone Layout and Keys Function
When you subscribe to Call Waiting service from your local telephone company, the telephone will display the name and number of the second caller while you are having a conversation.
Caller ID info displayed
Caller 1 4361234
1.When you are on the line, the telephone will automatically display the name and number of the second caller.
2.Press the soft key to answer the second caller.
3.When you have finished, press the soft key to continue with your conversation with the first caller.
Flash
Caller two's information is displayed
Caller 1 4
Caller 2 2915678
Flash
39
Note:
If you have transferred an external call to another handset, you cannot use the call waiting function via the second handset.
Handset
Earpiece
Up/CID key
Left soft key
Left/Int key
Dial/Speaker key
Alph numeric
a
keys
key
Microphone
Display
Right soft key
Right/Redial key
End key Down /Phonebook key
key
Charging contacts
Speaker
Battery compartment cover
4
n Phone Layout and Keys Function (continued)
Base
Rear and bottom View
Charge pins
Phone Line Jack
Power Jack
Setting up a 3-way conference call
When you have both an external call and an intercom call in progress, you can set up a three­way conference call, like this:
1. During an external call, press and then enter the number of the handset you want to join the 3-way call.
2. The called party press key to answer.
3. The calling party can press the key to start the 3-way call.
4. Either of the two internal handsets can press the key to leave the conference call at any time.
the key
Page button
Note:
If one of the handsets drops the conference call, the remaining handsets will continue the conference.
Charger
5
38
Loading...
+ 18 hidden pages