Xineron XIN-PD-0585 Instruction Manual

DNR Super High Resolution

Day & Night Color Camera

3-AXIS INDOOR DOME CAMERA

Please read this manual thoroughly before use, and keep it handy for future reference.

INSTRUCTION MANUAL

ii

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT
THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated ''dangerous
voltage'' within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.

PRECAUTIONS

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICABLE PARTS INSIDE.

REFFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

Safety

Should any liquid or solid object fall into the cabinet,

unplug the unit and have it checked by
qualified personnel before operating it any further.

Unplug the unit from the wall outlet if it is no

t going to

be used for several days or more.

To disconnect the cord, pull it out by the plug. Never

pull the cord itself.

Allow adequate air circulation to prevent internal heat

build-

up. Do not place the unit on soft surfaces (rugs,

carpets, sofas, etc.

) or near materials (curtains,

draperies) that may block the ventilation holes.

Installation

Do not install the unit in an extremely hot or humid place

or in a place subject to excessive dust, mech

anical

vibration.

Cleaning

Clean the unit with a slightly damp soft cloth.

Use a mild household detergent. Never use strong

solvents such as thinner or benzine as they might

damage the finish of the unit.

Retain the original carton and packing material

s for safe

transport of this unit in the future.

iii

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when
unused for long periods of time.

14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
ARE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only

iv

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

WARNING: This is a Class A product. In a domestic environment this

product may cause radio interference in which case the user may be
required to take adequate measures.

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

FCC INFORMATION :

This equipment

has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.

CAUTION :

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the
equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.

v

CONTENTS OF PACKAGE

Installation of the camera must be performed by qualified service personnel in
accordance with all local and national electrical and mechanical codes.

Carefully remove the color camera and its accessories from the carton
and verify that they were not damaged in shipment.

The contents of the package includes :

1. Camera in Housing _____________________1

2. Instruction Manual (This Document) ________1

3. Accessory Kit for Installing _______________1

4. Drilling guide label _____________________1

vi

TABLE OF CONTENTS

INTRODUCTION ----------------------------------------------------------------------------------------- 1

CAMERA CONNECTION & CONTENSTS of PACKAGE ------------------------------------- 2

INSTALLATION ------------------------------------------------------------------------------------------ 3

OSD MENU STRUCTURE ---------------------------------------------------------------------------- 7

AUTO WHITE DEFECT & LENS ADJUSTMENT ---------------------------------------------- 14

EXTERNAL DIMENSION ---------------------------------------------------------------------------- 15

SPECIFICATIONS ------------------------------------------------------------------------------------- 16

1

INTRODUCTION

The camera provides high-quality images using SONY 1/3” CCD and digital
Signal process LSIs.

Features:

● 1/3" HAD CCD Ⅱ for an image of high sensitivity

● 2.8~12 mm D/N Vari-focal(DC AI)

● Digital Wide Dynamic Range ( Adaptive Tone Reproduction)

● Excellent picture quality

● 700 lines of resolution

● Minimum illumination 0.15 Lux (Color)

● Auto electronic shutter [1/60(1/50) ~ 1/10,000] and manual electronic

shutter modes

● OSD (On Screen Display)

● Auto and manual white balance modes

● Auto BLC and HLC, Day & Night (Auto)

● 2D-NR

● Privacy Zone 4 point, Motion Detection 4 Point

● MIRROR, SHARPNESS, HUE, CONTRAST, GAIN

● AGC (Auto Gain Control)

● VIDEO OUT (BNC or UTP)

● Internal

● Operates in 12VDC or 24VAC

(If using DC 12V power adaptor, Please use a power supply capable of
supplying over 600mA.)

● Use Certified / Listed Class 2 power source only.

● Auto White Defect

IMPORTANT :

The user of this cam

era is responsible for

checking and complying with local, state, and federal laws and
statutes concerning the recording and monitoring of audio
signals.

2

CAMERA CONNECTION

1. Lens : 2.8~12mm D/N Vari-focal(DC AI) for wide area monitoring

2. Power : power source from a DC 12V or AC 24V

3. Video : BNC connector used to connect the camera to a monitor,
switcher.ect.

4. UTP OUT

CONTENTS of PACKAGE