Xineron XIN-MPD-0110 Quick Installation Manual

Quick Installation Guide

1. Description

The Network Camera supports the network service for a sensor image with progressive scan, which
can be monitored on a real-time screen regardless of distances and locations. By using its dedicated
program, many users are able to have an access to the Network Camera at once or a single user can
monitor various network cameras at the same time. It also enables users to play, store and retrieve a
monitoring image by using a PC. All the settings and real-time monitoring screens are also provided
through an access to the web.

The Network Camera is fully featured for security surveillance and remote monitoring needs. It is
based on the DSP compression chip, and makes it available on the network as real-time, full frame
rate Motion JPEG and H.264 (or MPEG-4) video streams.

• Installation Steps
Follow these steps to install the network camera on your local network (LAN):

1. Check the package contents against the list below.

2. Connect the Network Camera. See page 3.

3. Set an IP address. See page 5.

4. Set the password. See page 7.

• Package Component

The system comes with the following components:

• Contents in the installation CD

1. The Network camera User’s Manual

2. The SmartManager User’s Manual

3. The NCTitanium User’s Manual

4. The SmartManager Installation software

5. The NCTitanium Installation software

Note: Check your package to make sure that you received the complete system, including all
components shown above.

Quick Installation Guide

2

• Layout

! Camera Dimension

See the diagrams below for the exact dimension

Dimensions Unit: mm

NO

Name

Description

1

Alarm Cable

Cable for Alarm input and output

2

Power Cable

Cable for Power source (DC 12V)

3

Ethernet Cable

Cable for Ethernet

Quick Installation Guide

3

2. Installation

2.1 Camera Installation

Carefully remove the contents from the box, and verity that nothing was damaged in shipment.