Xindao P70521 User Manual

Cathy Protection backpack

P705.21X

Quick start

for IOS for android

1

3

4

2

ENGLISH

Thank you for purchasing this item!
Please make sure that the battery of the Cathy module
and your phone are always fully loaded, your APP is on
and that your Bluetooth is connected.

1. Hardware overview

Buzzer button
SOS button
Micro usb port
SOS button

2. Scan the QR code with your smart phone to download

the APP & register your account.

3.

Press both the SOS and buzzer button together for
several seconds, when hearing “DiDi” the power is on.
When pressing both buttons again for several seconds

4. Pairing the Device

When opening the APP for the first time you will follow
the instruction steps and you are able to pair the device.
Otherwise, go in the APP to Device Management -> Pair

5. Add SMS & emergency call contact

You can add a maximum of 3 contacts within the APP.
These are the contacts that you want receiving your
SOS alerts.
Six free SMS & Call credits are given to you and are
available within the APP. After using these credits you
can purchase new credits within the APP at Purchase.
These credits are needed to trigger the call and the SMS
as these are send over the local telephone lines.
Please inform your SOS contacts that the SMS message
and emergency calls will come from two numbers:
[phone] or [phone]
It is best to save these numbers with a recognizable
name and to make sure that they are not blacklisted.

6. Send SOS

Double click the SOS button to trigger the silent alarm.
An SMS and emergency phone call will be triggered and
send to your emergency contacts.
The phone call is to indicate that there is an emergency
and that the SMS needs to be checked. The SMS will
indicate your location through a google maps link.

ENGLISH

7. Buzzer alarm

Double click the buzzer button to trigger a loud alarm.

blinking on the charm. When double clicking the buzzer

This alarm will not be send to your contacts.

8. Notes

• The SOS app must be installed on your smartphone and
connected to the Cathy Bag Charm in order to activate
the SOS functions.

• The SOS App uses Bluetooth BLE4.0 technology (Range
is 3-5 meters).

• You must have internet connection to use the SOS app.

• You must enable the location services to be able to send

out your location with the silent alert.

• You have to allow the APP to give you notifications.

• DO NOT close the XD Design SOS app on your

smartphone, otherwise the emergency notifications will
not be activated.

• To install the SOS app on your android/IOS device, make
sure that the software version of your android is 7.0 or
above/IOS 11 or above.

•

restarted your smartphone.

•

versions of the App due to updates or new versions.

• Please inform your added contacts to be aware of
receiving your alert and explain them how to take action.

• Please note that continued use of GPS running in the
background can dramatically decrease the battery life of
your smartphone.

FCC ID: 2AEWEP70521
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference received,
including interference that may cause undesired operation.

ENGLISH

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part

15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.