Xilica Audio Design XTouch50, XTouch80 User Manual
XTOUCH SERIES
User Manual
1
Important Safety Information
1. READ THESE INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. KEEP THESE INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED ALL WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW ALL INSTRUCTIONS
All operating and use of instructions should be followed.
5. DO NOT USE THIS APPARATUS IN WATER.
Do not use the product near water. For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
6. CLEAN ONLY WITH DRY CLOTH.
Unplug the unit from the wall outlet before cleaning.
7. DO NOT BLOCK ANY VENTILATION OPENINGS
Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the limit and to protect it from
overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa,
rug, or similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
8. DO NOT INSTALL NEAR ANY HEAT SOURCES
This product should be situated away from heat sources such as radiators, stoves or other products (including amplifiers) that produces heat.
9. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED OR GROUNDING-TYPE PLUG
A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES,
AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
11. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER.
12. USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR TABLE SPECIFIED BY THE MANUFACTURER, OR SOLD WITH THE APPARATUS.
WHEN A CART IS USED, USE WITH CAUTION WHEN MOVING THE CART/APPARATUS TO AVOID INJURY FROM TIP-OVER.
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to someone, and serious
damage to the appliance. A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to overturn.
13. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power surges.
14. REFER ALL SERVICING TO QUALIFIED PERSONNEL. SERVICING IS REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANY
WAY. SUCH AS, WHEN THE POWER SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN SPILLED, OR OBJECTS HAVE FALLEN
INTO THE APPARATUS, THE APPARATUS HAS BEEN EXPOSED TO RAIN OR MOISTURE, DOES NOT OPERATE NORMALLY, OR HAS BEEN
DROPPED.
15. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
16. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
2
Table of Contents
Labels, Descriptions and
4-5
Technical Specifications
Device Connectivity
6-7
XTouch Display Settings 8-9
Install Xilica Designer
Mac OS X Installation
Windows Installation
10
11
Launch Xilica Designer
Network View 12
Firmware Upgrade 13-15
Project View 16
Create a Design 17-21
Going Online 22-24
Contact and Support 25
3
XTouch50 Description
ETHERNET (PoE)
24VDC/0.5A
MODEL: XTOUCH50
MANUFACTURED IN TAIWAN
1
2
1 Power over Ethernet
(PoE)
Connect the device to the network using a standard RJ45
(Ethernet) cable. To send Power over Ethernet, a PoE switch
is needed. If you are sending Power over Ethernet (PoE), the
external power supply is not needed.
2 External power supply
Insert an external 24VDC/0.5A power supply (not included).
Technical Specifications (XTouch50)
Screen size 5” touch screen
Display HD 1280x720 resolution
Color Depth 16.7M colors, 400 nits brightness
Connectors RJ45 Ethernet, External power supply
Power Power over Ethernet (PoE),
Or 24VDC/0.5A External power supply (not included)
Wall mount Mount onto US/EU/UK 1-gang back boxes or low voltage bracket using
the included XTouch50 mounting bracket
Mounting orientation Portrait or landscape (user-defined)
Rack mount Optional 2RU rack mount panel with 1-gang threaded cut out
Dimensions 5.2”x3.2”x1.3” (132x81x34mm)
Weight 0.4lbs / 0.2kg
Warranty 1 years, parts and labor
4
XTouch80 Description
1 External power supply
2 Power over Ethernet
(PoE)
Insert an external 24VDC/1A power supply (not included).
Connect the device to the network using a standard RJ45
(Ethernet) cable. To send Power over Ethernet, a PoE switch
is needed. If you are sending Power over Ethernet (PoE), the
external power supply is not needed.
Technical Specifications (XTouch80)
MODEL: XTOUCH80
MANUFACTURED IN TAIWAN
24VDC/1A
USB
LAN / PoE
802.3at compliant
1
2
Screen size 8” touch screen
Display HD 1280x800 resolution
Color Depth 16.7M colors, 400 nits brightness
Connectors RJ45 Ethernet, External power supply
Power Power over Ethernet (PoE),
Or 24VDC/1A External power supply (not included)
Wall mount Mount onto US 2-gang back boxes or low voltage bracket using
the included XTouch80 mounting bracket
Mounting orientation Portrait or landscape (user-defined)
Rack mount Optional 4RU rack mount panel with 2-gang threaded cut out
Table-top Optional TM80 table-top mounting stand
Dimensions 8.7”x5.8”x1.5” (223x149x38mm)
Weight 1lbs / 0.5kg
Warranty 1 years, parts and labor
5
Device Connectivity
Xilica processors and control devices run on a network based infrastructure and are set up
and controlled by a host computer using the Xilica Designer software.
What’s in the Box
• XTouchhardwaredevice
• Lowvoltagemountingbracket
What you need to Provide
• Computer
• Networkinterface(Router,PoEswitch)
A router is used for IP assignment and easy connectivity to computer and control devices.
A PoE switch is used to power XTouch controls.
•Ethernetcables
All wired connections use a standard RJ45 Cat 5/6 (Ethernet) connection.
Connecting Devices
A network connection can be made between the computer and processor using:
A) DHCP enabled Router or Server/Router combination (Recommended)
With DHCP enabled routers and servers, the processor will automatically obtain the IP address
upon power up and connection. A router and PoE switch provides DHCP as well as power to the
XTouchcontrols.LinksysroutersandNetgearswitchesarerecommended.
B) A non-DHCP direct connection or indirect connection via an Ethernet switch
When the processor is connected directly to a computer or indirectly via a switch/hub and DHCP is
not available, the connection process is not automatic.
6
A) Connecting using a DHCP enabled router/server
Note: DHCP enabled Router/switch gear should be turned on first, with all Ethernet cables
connected to the hardware prior to Powering ON the hardware. This will allow for proper IP
address distribution to the Hardware.
First, Power ON the router/switch gear.
Then connect an Ethernet cable from the host computer to the DHCP enabled router.
Connect an Ethernet cable from the router to the PoE switch.
Then connect another Ethernet cable from the PoE switch to the XTouch control(s).
B) Non-DHCP direct connection or indirect connection
Non-DHCP connections are not automatic. Non-DHCP connections must be manually configured.
Please refer to Xilica Designer help file or Xilica FAQ for further assistance.
7
XTouch Display Settings
XTouch settings can be configured on the front panel of the device.
Swipe up from the bottom of the screen. A menu will appear at the bottom of the screen.
Select the gear icon to view the device settings.
To manually configure network settings, deselect DHCP Enabled and input the new information.
Click Ok to save your changes.
8
Loading...