Xilica Audio Design XPanel V2 User Manual

XPanel V2

Remote Control Panel

User Manual

XILICA Audio Design

XPanel User's manual - Page 2

Important Safety Instructions

1. READ THESE INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.

2. KEEP THESE INSTRUCTIONS
The safety and operating instructions should be retained for future reference.

3. HEED ALL WARNINGS
All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW ALL INSTRUCTIONS
All operating and use of instructions should be followed.

5. DO NOT USE THIS APPARATUS NEAR WATER
Do not use the product near water. For example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool, and the like.

6. CLEAN ONLY WITH DRY CLOTH

Unplug the unit from the wall outlet before cleaning. Do not use liquid cl eaners or
aerosol cleaners. Use a damp cloth for cleaning.

7. DO NOT BLOCK ANY VE NT ILATION OPENINGS
Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure
reliable operation of the limit and to protect it from overheating. These openings must
not be blocked or covered. The openings should never be blocked by placing the product
on a bed, sofa, rug, or similar surface. This product should never be placed near or over
a radiator or heat source. This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the manufacture's
instructions have been adhered to.

8. DO NOT INSTALL NEAR ANY HEAT SOURCES

XPanel User's manual - Page 3

This Product should be situated away from heat sources such as radiators, stoves, or
other products (including amplifiers) that produces heat.

9. DO NOT DEFEAT THE S AF E TY PUR P O S E OF THE POLARIZED OR GROUNDING-TYPE
PLUG
A Polarized plug has two blades with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide blade or the third prongs are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

10. PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED
PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE
THEY EXIT FROM THE APPARATUS.

11. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER.

12. USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR TABLE SPECIFIED BY THE
MANUFACTURER, OR SOLD WITH THE APPARATUS. WHEN A CART IS USED, USE
CAUTION WHEN MOVING THE CART/APPARATUS TO AVOID INJURY FROM TIP-OVER.
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may
fall, causing serious injury to someone, and serious damage to the appliance. A unit and
cart combination should be m o ved with care. Quick stops, excessi v e force, and uneven
surfaces may cause the product and cart combination to overturn.

13. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR
LONG PERIODS OF TIME.
For added protection for this unit during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the unit due to lightning and power
line surges.

14. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICING IS
REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANYWAY, SUCH AS
WHEN THE POWER SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN SPILLED
OR OBJECTS HAVE FALLEN INTO THE APPARATUS, THE APPARATUS HAS BEEN
EXPOSED TO RAIN OR MOISTURE, DOES NOT OPERATE NORMALLY, OR HAS BEEN
FROPPED.

15. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPARATUS TO RAIN OR MOISTURE.

16. APPARAT US SHALL NOT BE EXPOSED TO DRIPPING OR SPL ASHING AND NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.

XPanel User's manual - Page 4

Table of Contents

Table of Contents ................................................................... 4

1.0 Introduction .................................................................... 5

2.0 Features .......................................................................... 5

3.0 The XPanel ................................................................... 6-7

4.0 Firmware upgrading the XPanel ................................... 7

5.0 Setting Up the XPanel .................................................... 8

6.0 Programming the XPanel ........................................... 8-9

7.0 Control Options ............................................................ 10

8.0 Specifications ............................................................... 11

9.0 Warranty........................................................................ 12