KAMI说明书
2018-12-27
2018-12-27
增加FCC认证声明
Camera x 1
Camera mount
x 1
Envelope x 1
Screws x 2
Power Adapter
x 1
USB power cable x 1
USB - Ethernet Adapter
x 1
Getting startedWhat’s in the box
Please make sure your camera is near your Wi-FI
router and your phone is on the same Wi-Fi
network.
Step 1
Download the Kami Home App from the Apple App
Store or Google Play. Search for “Kami Home”.
Step 2
Plug in your camera to switch it on. (If you are
installing a camera that has previously been
installed on a different network or you’ve changed
your Wi-Fi password, then you must first reset
the camera by pressing the reset button located
next to the USB connector. Continue to follow the
instructions.)
Step 3
Sign up or login to your Kami account, then follow
the on-screen instructions to pair your phone to
your Kami camera.
Step 4
After logging in to your Kami Home App, click the +
sign to select your device or scan the QR product
code. When you hear the voice prompt “waiting to
connect”, tap “heard voice prompt”. Next, scan the
QR code on the App with your camera. Wait until you
hear the voice prompt “pairing successful”.
Now your camera is ready to use!
Mounting lnstructions
Note: The mounting area should support at least 3
times the total weight of the bracket and the camera.
1. Verify camera will face desired
direction prior to mounting.
Verify USB cable will reach
desired location. Use included
screws to install the mount on
a flat ceiling.
2. Install the camera by twisting
Fix the base tray to the
ceiling with the screws
and locking it into the mount.
lnstall the device
Specifications
Maximum Resolution: 1920x1080
•
Lens: 110° Wide Angle
•
Audio: Built-in Mic/Speaker, full duplex
•
Video Compression: H.264 High Profile
•
Enhancement: 3D Noise Reduction
•
Power Consumption: 3.5W (Max)
•
WiFi: 2.4 GHz / 5 GHz, 802.11ac/abgn
•
Supported Platforms: Android / iOS / PC
•
Wireless Security: WEP/WPA/WPA2
•
Power Supply: DC 5V/1A (MicroUSB)
•
Pan/Tilt: 360° horizontally/90° vertically
•
Website: www.kamihome.com
Support: 888-878-1584
E-mail: support@kamihome.com
https://kamihome.com/legal/fcc
This device complies with Part 15 of the FCC Rules / Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
FCC ID: 2AFIB-YYS3218
IC: 20436-YYS3218
User Manual
Y32
王伟
KAMI
Pantone 331U+Pantone Cool Gray 11C
85 x 85mm
100g 晨鸣云镜双胶
6099Y
Y32W