Xiaomi Yunbike C 1 Accessories

Xiaomi Yunbike C 1

XIAOMI-MI.COM

Accessories

Battery Charging device Pedals х 2 Hex wrench Keys х 2 Wrench

1. Wheel

2. Front sleeve

3. Fork

4. Front brake

5. Brake System

6. Headlights

7. Front steering cup

8. Wheel

9. Measuring panel

10. Right brake handle

11. Stem

12. Left brake handle

13. Saddle

14. Saddle pin

XIAOMI-MI.COM

15. Battery

16. Power

17. Battery

18. Lock Battery

19. Socket

20. Pedal

21. Rear brake

22. Chain wheel

23. Chain

24. Motor

25. Footstep

Assembling and settings

XIAOMI-MI.COM

1. Spinning front wheel clockwise by 180 degrees, conrm the right direction of motion (after the scroll wheel, press
the front brakes).

2. Reduce the stem clamp bolt using a 5mm hex wrench (need to twist counterclockwise). Alternately, remove the
front fork cartridge and other connecting elements.

3. First assemble front fork sleeve and place the into steering column. Take connecting elements of stern (logo side
up) and connect with the sleeve, insert tensioner bolt.

4. Set a stem parallel with the front wheel, then tighten the tensioner bolt.

5. Set and secure the right and left pedals using the 5mm Allen key (on the pedals, you will see notation R / L,
indicating the right and left foot).

Setting / Removing of battery

When installing battery in a special slot, follow the signs depicted direction, then you need to connect the battery to
the socket.
If you need to disassemble the battery, unplug it from the socket, turn key 90 degrees clockwise, remove the battery,
pulling it up.
After dismantling the battery, you can see the presence of USB port. Open the protective case and connect USB
cable, you can charge your digital devices (5V / 1A).

Video

Socket

port

Slot for battery

installation

Express Install Mi YunBike C1
For more information, visit the website
www.zhixingche.com