Xiaomi MITVMDZ22AB User Manual

Mi Box Important
Product Information

MODEL: MDZ-22-AB
Beijing Xiaomi Electronics Co.,Ltd

112mm

112mm

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Beijing Xiaomi Electronics Co.,Ltd declares that the
radio equipment type MI BOX is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address: www.mi.com

RF FREQUENCY AND POWER

This device offers the following frequency bands in EU
areas only and maximum radio-frequency power
Bluetooth 2402-2480 MHz: < 10dBm
Wi-Fi 2412-2472 MHz: < 20dBm
Wi-Fi 5180-5320MHz and 5500-5700: < 20dBm
Wi-Fi 5745-5825: < 14dBm

This device is restricted to indoor use only when operating in
5150-5350MHz frequency range in following countries:

AT BE BG HR CY CZ DK

EE FI FR DE EL HU IE

IT LV LT LU MT NL PL

PT RO SK SI ES SE UK

Receiver Category 2

This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.

For the purpose of recycling to facilitate effective
utilization of resources, please return this
product to a nearby authorized Collection
Centre, registered Dismantler or Recycler, or
Xiaomi Service Centre when disposing of this
product.

What the Wheelie Bin symbol means: The symbol says don’ t
dispose your e-waste into the municipal waste collection
bins. That’ s because these wastes are hazardous in nature
and need to be recycled in a special way.

warning: Ensure that the power adapter used meets the
requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been
tested and approved according to national or local standards.

For AC/DC Adapter, the socket-outlet shall be installed near the
equipment and shall be easily accessible.

Caution!

Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.

Operating temperature range：-10 °C to +45 °C

Address: Room 707,7F,Building 5,No 58,JinghaiWulu Road,Beijing
economic and Technological Development Zone,China

E-Waste

Xiaomi products are in conformity with the requirements of the reduction of
hazardous substances of the E-waste Rules 2016. The content of hazardous
substance with the exemption of the applications listed in SCHEDULE II of the
E-waste Rules:

1. Lead (Pb) – not over 0.1% by weight;

2. Cadmium (Cd) – not over 0.01% by weight;

3. Mercury (Hg) – not over 0.1% by weight;

4. Hexavalent chromium (Cr6+) – not over 0.1% by weight;

5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;

6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.

Use only the following listed power supplies:

AIRING MECHANICAL CO.,LTD /EWC+10052-2100 or EBVC+10052-2100
Dongguan Aoyuan Electronics Technology Co., Ltd. /AY11DA-AF0522102-UK or AY11DA-AF0522102-EU

How to dispose this product

Carry it to nearest service centre of Xiaomi OR Call the Toll Free Number: 1800 103 6286
OR Write to us on [e-mail]. Instructions of handling the product during and aer its use
and Do’ s and Don ’t s with respect to handling the product;

Do’s:

a. Always look for information on the catalogue with your product for end-of-life equipment handling.
b. Ensure that only Authorized Recyclers repair and handle your electronic products.
c. Always call Authorized E-waste Recyclers to Dispose products that have reached end-of life.
d. Always drop your used electronic products, baeries or any accessories when they reach the end of their life at your nearest Authorized
E-Waste CollectionCenter / Collection Point.
e. Wherever possible or as instructed, separate the packaging material according to responsible waste disposal options and sorting for
recycling.

Don’ts:

a. Do not dismantle your electronic Products on your own.
b. Do not throw electronics in bins having “Do not Dispose” sign.
c. Do not give e-waste to informal and unorganized sectors like Local Scrap Dealer/ Rag Pickers.

FCC Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.

The shielded HDMI cable must be used with this unit to ensure compliance with the Class B FCC limits.

The device is going to be operated in 5150~5250MHz frequency range. It is restricted indoor environment only

Operating temperature range：-10 °C to +45 °C

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC
RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing
the no-collocation statement.

K：100

纸张：105G双铜
字体：Adelle Sans 系列