Xiaomi Mi True Wireless Earphones User Manual

This version is for private use only and should not be distributed.

Mi True Wireless Earphones User Manual

Read this manual carefully before use, and retain it for future reference

This version is for private use only and should not be distributed.

Product Overview

Indicator
Light

Function
Buon

Charging
Port

Charging Case

Accessories: Type-C charging cable, ear tips × 4 pairs (XS/S/M/L, M installed)

Indicator Light

Ear Tip

Noise Canceling
Microphone

Touch Buon

R

Microphone

Earphones

1

This version is for private use only and should not be distributed.

Charging

Charging the earphones

•

When the earphones are placed into the charging case, they will automatically start
charging.

•

Charging the charging case

The indicator light will blink slowly while charging, and it will stay lit when charging has
been completed.

Note: Prior to first use, the earphones are deactivated. To activate them, place them into
the charging case, and press the function buon. We recommend fully charging the
earphones before using them for the first time.

Checking Baery Level

Checking the baery level of the earphones

•

The baery level of the earphones can be checked in the following two ways:

While the earphones are being charged.

1.

When taking the earphones out of the charging case or your ears.

2.

When the earphones indicator light stays lit for 5 seconds, it means the baery level is
sufficient. When the earphones indicator light is blinking, it means the baery level is low
and should be charged immediately.

Checking the baery level of the charging case

•

Open the charging case cover, or press the function buon if the charging case cover is
closed:

When the indicator light of the charging case stays lit for 5 seconds, it means the baery
is sufficient.

When the charging case's indicator light is blinking, it means the earphones' baery level
is low and should be charged immediately.

Turning On

When opening the charging case, the earphones will automatically turn on.

Wearing

Take the earphones out of the charging case, and insert them into your ears according to

1.

the le (L) and right (R) marks.

You can switch to a different size ear tips to find the ones that suit you most (size M is

2.

installed by default).

Note: Aer using the earphones, place them back into the charging case. This will extend
their lifespan and help you avoid losing or misplacing them.

2

This version is for private use only and should not be distributed.

Connecting

Connecting the earphones to a new device

•

1.

Place the earphones into the charging case, then press and hold the function buon for
2 seconds. The charging case indicator light will start blinking, indicating that the
earphones are waiting to be connected.

Enable the device's Bluetooth, then locate and connect to "Mi True Wireless

2.

Earphones". If a passcode is requested, enter "0000".

Connecting to two devices

•

Place one of the earphones into the charging case, then press and hold the function

1.

buon for 2 seconds. Use device A to search for and connect to the earphone.

Aer the first earphone is connected to device A, take the earphone out of the

2.

charging case. Now place the second earphone into the charging case and press and
hold the function buon for 2 seconds. Use device B to search for and connect to

the earphone. This will connect each earphone to a separate device.

Note: Before using this function, the connection history of each earphone needs to be
cleared.

•

Connection interrupted

When a device's Bluetooth is disabled, or if the earphones are out of range, the
earphones will automatically enter awaiting connection mode. If the earphones remain
unconnected to a device for 10 minutes, they will enter sleep mode. Wearing the
earphones again will wake them up and enter awaiting connection mode.

Automatic connection

•

While the earphones are in the charging case, opening the case will cause the
earphones to automatically connect to the most recently used Bluetooth device. If no
connection history is detected, or if the earphones cannot successfully connect to any
Bluetooth device, the earphones will automatically enter the

awaiting connection mode.

Note: If the earphones cannot automatically connect to a device, you will need to
manually connect the earphones to the desired device via the device's Bluetooth
seings.

Due to the connection characteristics of the Bluetooth signal, in dense environments
with 2.4 GHz electromagnetic signal interferences, there may be occasional
disconnects or no sound.

3

This version is for private use only and should not be distributed.

Clearing Connection History

Place the earphones into the charging case.

1.

Press and hold the charging case's function buon for at least 10 seconds. When the

2.

indicator light stays lit, release the buon.

The earphones will restart and enter into pairing mode. Previous connection history has

3.

been cleared.

Function Overview

Incoming calls

Gently tap either one of the earphones twice, to
answer/end calls.

Music and voice assistant

While wearing both earphones:

Gently tap the right (R) earphone twice, to play/pause
music.

Gently tap the le (L) earphone twice, to access the
voice assistant.

Taking out an earphone will automatically pause music.

While wearing one earphone:

Gently tap the earphone twice, to play/pause music.

Note: The voice assistant function requires device support, and voice assistant needs to
be authorized on the device.

Noise Cancelling Mode

Wear both earphones, press and hold either one of the earphones for 3 seconds. You will
hear a beeping sound to indicate the earphones have entered noise cancelling mode.

Note:

Noise cancelling mode cannot be enabled during a call or when receiving a call.

1.

Find the eartip that fits the best to achieve beer listening experience.

2.

Illustrations of product, accessories, and user interface in the user manual are for

3.

reference purposes only. Actual product and functions may vary due to product
enhancements.

4

This version is for private use only and should not be distributed.

Specifications

Model: TWSEJ01JY

Net Weight: 58 g

Charging Time: 1 h

Impedance: 16 Ω

Input: 5 V 1.1 A

Wireless Range: 10 m

Bluetooth Profiles: BLE/HFP/HSP/A2DP/AVRCP

Hereby, Tiinlab declares that the radio equipment type Mi

True Wireless Earphones is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following internet address:
hps://www.mi.com/en/service/support/declaration.html

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

Charging Port: Type-C

Wireless Connectivity: Bluetooth 4.2

Earphones' Baery Life ( standalone ):

3 h ( at 80 % volume )

Total Baery Life ( with charging case ):

10 h ( at 80 % volume )

interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

5

This version is for private use only and should not be distributed.

All products bearing this symbol are waste electrical and

electronic equipment (WEEE as in directive 2012/19/EU)

which should not be mixed with unsorted household waste. Instead, you should

protect human health and the environment by handing over your waste equipment to a

designated collection point for the recycling of waste electrical and electronic equipment,

appointed by the government or local authorities. Correct disposal and recycling will

help prevent potential negative consequences to the environment and human health.

Please contact the installer or local authorities for more information about the location

as well as terms and conditions of such collection points.

Safety Caution

Do not expose baeries or baery packs to excessive heat such as sunshine, fire or the like.

6