Xiaomi mijia heating rice cooker operation manual
MiJia Heating Pressure Rice Cooker
XIAOMI-MI.COM
Before using the device, read the instructions carefully
Content
YLIH01CM_V2.0
Please read the instructions carefully to ensure correct and safe use of this device.
This product is only intended for home use.
Pay special attention to the section «Precautions» (p. 8-9)
1. Introduction to the product 02
2. Fast using 03
3. The client application App 03
4. Regulation of the time in standby mode 04
5. Operation Manual 04
Cooking, quick cooking 05
Rice porridge, heat preservation 05
Personal settings, the choice of the program 05
6. Cleaning the rice cooker
The assembly, disassembly 06
Before use
Usage
FAQ
7. Troubleshooting 05
8. Fault codes 07
9. Precautions 07
10. Basic settings 08
11. Name of Product 08
12. The presence of toxic and hazardous substances 08
13. Schematic diagram 09
14. Warranty 09
Power
cable
Measuring cup Spoon (at) Ложка ( soup)
1
Introduction to the product
XIAOMI-MI.COM
Temperature
sensor
Steam release
valve
Inner lid latch
Removable inner lid
Protective
surface
Attention! Heat! Before
installing the inner lid, set
the steam release valve
Water level
indicator
Attention! Heat! After use,
remove to wash.
The back side of
inner cover
Reux valve Safety valve Pressure
The front side of
inner cover
controller
Button to
open the lid
1. LED digital display time
2. Time control buttons (hours / minutes)
3. Select of program
4. Menu
5. Select / Cancel
6. Digital timer
7. Start Button
2
Control Panel
Quick using
XIAOMI-MI.COM
Application
Even more Smart devices can be found in a mobile application Mi
«Smart Home»
1. Power Connection
Plug one end into the rice cooker, and the second - to a power
supply.
2. Wi-Fi connection
Connecting Rice cooker to the power supply for the rst time will
automatically open connection to network. Connect the new device in
the application «Mi Smart Home».
Note: Use a thin object to press and hold for 5 seconds the reset
button Wi-Fi, and then re-open standby connection to the network.
Wi-Fi indicator
Hole to reset Wi-Fi
Installing the client application
To install the client application on your smartphone, open Mi Store
and search for «Mi Smart Home» App or scan the QR-Code.
This device is already in the list of devices in the «Mi Smart Home»,
supporting MIUI system, and can interface with other intelligent
devices of your home.
By connecting a smartphone to the Wi-Fi network, open the
downloaded client application and follow the instructions shown on
the phone display.
Indicator
Waiting for connection Connecting to a network Connecting succesfully
Yellow blinks Blue blinks Blue lit
3
Loading...