Page 1
Mijia Car Air Purier
Installing the device
When installing the device, the button and indicator should be directed to the
interior of the car. Fix the device with a special complete mounting.
Complete fastening and head restraint
1. Establish complete fastening on a back central head restraint. It isn’t
recommended to establish fastening on a forward head restraint (if installation
of the device on a back head restraint is impossible, you can buy additional
accessories for installation of the air cleaner). Pass belts of complete fastening
through a head restraint and fasten them.
2. Tighten the attachment belts securely so that there is no free space between
the device and the head restraint, so that the air cleaner is securely xed.
Before tightening the belts to the limit, use a special leather case to hide the
excess length of the belts.
Belt case
If the attachment belts are very long, use a leather case to hide them. The
interior of your car will look cleaner and more neat
Page 2
Installing the power cable
Turn on the device
If you can not properly route the power cord from the device to the cigarette
lighter, use the qualied help of an expert of the nearest 4S store («4-re
in one»: car sales, service center, consultation, spare parts sale) or other
reliable service center.
Connecting the device to the power supply
To connect the air cleaner to the power supply, connect one end of the cable
to the corresponding connector of the device, and connect the other end to
the cigarette lighter.
To turn on the device, press and hold the power button for 3 seconds. When
pressed briey, the air cleaner’s operating modes are alternately switched:
«silent mode», «standard mode» and «quick mode».
Sandard mode
Silent mode Quick mode
Connecting to the network
Scan the QR code, install «Мі APP» on the phone, then add «Mijia (Mi Home)
Car Air Purier» to the device list. Now you can take advantage of a variety of
dierent functions.
Even more smart devices you can nd on the site mi.com or purchase devices
in the mobile application Mi «Smart Home»
For more detailed information on the installation and use of this device, see
the instructions «Mijia (Mi Home) Car Air Purier»
Page 3
Acquaintance
Air outlet
Air supply
aperture
Air outlet
Dust sensor
Mijia (Mi Home) Car Air Purier
Read the instructions carefully before using the device
Protective cover of the
lter compartment
Air supply
aperture
Filter
Mode switch
button
Handle of the
protective panel
Air quality indicator
/ lter change
indicator
Power cable
connector
Click on the handle to open the protective cover of the lter compartment
Page 4
Component parts
Installing the device
1. Complete mounting x1
Front
Clasp
Fasteners (buttons)
2. Leather case x1
Before tightening the belts to the limit, use a special leather case
to hide the excess length of the belts. See the 5th step in the
section «Installing the device».
Slider
Front Belt
Retaining
hook
Complete
fastening
Rear
Buckle
Anti-slip coating
3. Power cable x1
(4.5m)
Rear Belt
1. Installing the device
When installing the device, the button and
indicator should be directed to the interior
of the car. Fix the device with the help of
a complete xing, with the air outlet holes
pointing upwards.
3. Installing the complete mounting
Install the complete mounting on the rear
center head restraint. It is not recommended
to install the mount on the front head
restraint (if the installation of the device is not
possible with the rear head restraint, you can
purchase additional components for installing
the air cleaner). Thread the complete
mounting belts through the head restraint and
fasten the fasteners.
2. Lock the device
Spread the belts, x with them air cleaner
by fastening the fasteners.
4. Fixing the complete mounting
Tighten the attachment belts securely so
that there is no free space between the
device and the head restraint, so that the
air cleaner will be securely xed. Before
tightening the belts to the limit, use a
special leather case to hide the excess
length of the belts.
Front side Backside
Page 5
5. Belts case
Using the device
If the attachment belts are very long, use a leather case to hide them. The interior
of your car will look cleaner and tidy.
Installing the power cable
If you can not properly route the power cord
from the device to the cigarette lighter, use
the qualied help of an expert of the nearest
4S store («4-re in one»: car sales, service
center, consultation, spare parts sale) or
other reliable service center.
Connecting the device to the power
supply
To connect the air cleaner to the power
supply, connect one end of the cable to
the corresponding connector of the device,
and connect the other end to the cigarette
lighter.
On / O / Mode Switch
To turn on the device, press and hold the power button for 3 seconds. When pressed
briey, the air cleaner’s operating modes are switched alternately: «silent mode»,
«standard mode» and «quick mode».
Status Indicators
* Flashing indicators indicate an error or the need to replace the lter in the near future.
The user can obtain more detailed information in the APP.
Sound signals
Page 6
Quick Settings
Maintaining the device
This device is already on the list of Mi Smart Home devices, it can be controlled by
using Mi Home APP, supports Android and iOS.
1. Installing the application
In the Mi Store, nd the Mi Home app or scan the QR code to install the application.
2. Adding a new device
Open the application, click on the «my devices» icon and add «Car Air Purier»
to your list. After the successful addition of the device, you will nd it in the list of
«Smart Devices».
3. Connecting via Bluetooth
Turn on Bluetooth on your phone, the system will automatically pair.
Filter Replacement
1. Remove the old lter from the
device.
3. Insert a new lter into the
device. Note that the special lter
handles must be on top so that
you can easily get it from the air
cleaner later on.
2. Cut the package and remove the
new lter.
4. After changing the lter, turn on the
device. Open the APP and reset the
settings. The application will begin a
new countdown of the operating time
of the new lter.
Even more smart devices you can nd
on the site mi.com or purchase devices
in the mobile application Mi «Smart
Home»
Note:
It is recommended to change the lter every 3-6 months. It is necessary to replace
the lter if the yellow light on the device is lit, and in the APP you have received a
notication about the need to replace the lter.
For optimum performance of the air cleaner and its normal operation, please use
genuine Mi lters.
Page 7
Maintaining the device
1. Cleaning the lter compartment
For optimum ventilation and air purication, use a vacuum cleaner or a soft cloth to
clean the dust compartment and air outlets.
2. Cleaning the dust sensor
Using the appropriate auxiliary items,
open and remove the dust cover of the
sensor from dust.
To clean the sensor, use a soft, dry
cloth. It is recommended to clean the
sensor every six months.
Technical specications
The presence of toxic and harmful substances
These tables are provided in accordance with SJ / T 11364.
O: Toxic and harmful substances in all components of this device are contained in an
amount below the limit value in accordance with standard GB / T 26572-2011.
X: the presence of toxic and noxious substances in at least one of the components of
this device in an amount exceeding the limit value, according to GB / T 26572-2011.
Page 8
Special instructions
Power and precautions:
Transportation:
- during transportation, it is necessary to switch o the device and disconnect it from
the power supply;
- make sure that the device is securely xed to prevent it from falling and injuring
passengers;
Installation:
- make sure that the device and the complete xing are securely xed to prevent
loosening and falling of the device;
- Pay attention to the direction of installation of the device. The button and indicator
should be located in the direction of the car interior;
- Install the device on the rear center head restraint. It is not recommended to
mount the mount on the front head restraint (if it is not possible to install the device
on the rear head restraint, you can purchase additional components for installing
the air cleaner).
Using:
- in case of malfunctions, problems with fan rotation, detection of specic odor,
heating and other signs not characteristic for normal operation, immediately stop
using the device;
- It is forbidden to put any objects on the device, block the air supply and its outlet;
- hair and other small objects should not be near the device, this can block the
normal outlet and air inlet;
- Do not sit or lean against this device.
The following information will help you prevent a re, avoid electric shock or other
damage.
- do not twist, bend the power cord, otherwise the cable wires may remain bare
or even break. It is recommended to lay the power cable from the device to the
cigarette lighter compactly, see step 6 of the section «Installing the device» (if you
can not properly lay the power cord yourself, use the qualied help of a specialist of
the service center);
- do not pull on the power cord when turning o / on the power;
- please do not plug the power cord into an improper outlet;
- after turning o the ignition of the car, it is recommended to remove the plug from
the cigarette lighter, so as not to consume the battery;
- please do not plug the power cords of other devices into a single outlet with an air
cleaner;
- unauthorized persons are forbidden to open and perform maintenance of the
device;
- If the power cable is damaged, use a special exible cable, repair the old cable, or
purchase a new one from the manufacturer;
- before you start technical maintenance of the air cleaner or before moving it,
disconnect the device from power;
- the cigarette lighter must be clean. Please do not allow foreign objects to enter the
cigarette lighter, otherwise this may adversely aect the safety of this device;V
Restrictions in use:
The following information will help you prevent a re, avoid electric shock or injury.
- It is forbidden to use the device if the complete mounting is broken and reliable
installation of the air cleaner in the car is not possible;
- Do not allow water or other liquids enter into device.
XIAOMI-MI.COM
Loading...