Xiaomi Band 3, XMSH05HM User Manual

Xiaomi Band 3

User Manual

Read this manual carefully before use, and retain it for future reference

Touchscreen

Buon

Heart Rate Monitor

Charging Port

01 Product Overview

Charging Cable

c

Fitness Tracker

a

Wristband

b

1. Insert one end of the fitness tracker into the slot from the front of the wristband.

2. Press down on the other end with your thumb to push the fitness tracker into the slot
completely.

02 Installing the Fitness Tracker

Tighten the wristband around your wrist until there is enough slack to fit about one finger, then
adjust the fit until you find a comfortable position.

Note: Wearing the band too loosely may impact data collection by the heart rate monitor.

03 Wearing the Xiaomi Band

Mi Fit

QR code for the Mi Fit app

(Android 4.4/iOS 9.0 or later)

1. To download the Mi Fit app, scan the QR code below or search for "Mi Fit" on the Mi App Store
or Apple Store.

04 Pairing the Xiaomi Band with a Smartphone

2. Open the Mi Fit app, log in to your account and select "Device Pairing", then follow the pairing
instructions to proceed. When the Xiaomi Band starts to vibrate and the Bluetooth pairing
notification appears on the screen, press the buon to complete the pairing process.
Note: Please make sure Bluetooth connection is activated on your mobile phone. During the
pairing process, please keep the Xiaomi Band near your mobile phone.

Note: This diagram is for reference only

My Xiaomi Band did not vibrate

When the Xiaomi Band starts to

vibrate, touch the buon on the

wristband to confirm pairing.

Press the buon on the

wristband to confirm pairing

Touch

Touch

Aer the Xiaomi Band is paired successfully, it will begin to track and analyze your daily activities
and sleeping habits.
Touch to light up the screen. Slide up or down on the screen to browse your activity data, measure
your heart rate, and access many other features.
Slide le or right on the screen to switch the display between different items.

05 Using the Fitness Tracker

Slide le/right on
the screen to switch
between items

Slide up or down to
switch between
different functions

Remove the wristband from your wrist, hold on to each end and pull on the wristband until you
see a small gap between the fitness tracker and the wristband. Use your finger to pop the fitness
tracker out of its slot from the front side of the wristband.

06 Removing the Fitness Tracker

Please charge your Xiaomi Band immediately when the low power indicator is on.

07 Charging the Xiaomi Band

When using the Xiaomi Band to measure your heart rate, please keep your wrist steady.

Xiaomi Band 3 has a water resistance rating of 5ATM. It can be worn in the shower, swimming

pool, or while swimming near the shore. It cannot be used, however, while siing in a sauna or
diving in the ocean.

Underwater operation is not supported for the Xiaomi Band's touch-buon and touchscreen.
Aer the Xiaomi Band has come in contact with water, please use a so cloth to wipe away
excess water from its surface before using the device.

During daily use, please do not wear the Band too tightly around your wrist and keep its contact
area dry. You should also clean the wristband regularly with water. Please stop using the product
immediately and seek medical assistance if the contact area on your skin begins to show signs
of redness or swelling.

08 Important Safeguards

Name: Xiaomi Band 3
Model: XMSH05HM
Weight of the Fitness Tracker: 8.5 g
Dimensions of the Fitness Tracker: 17.9 x 46.9 x 12 mm
Wristband material: Thermoplastic elastomer
Clasp material: Aluminum alloy
Adjustable length: 155 - 216 mm
Compatible with: Android 4.4/iOS 9.0 or later
Baery capacity: 110mAh
Baery type: Li-Ion polymer baery
Input voltage: DC 5 V
Input current: 250 mA (Max)
Frequency: 2402-2480MHz
Max output: 0dBm
IP rating: 5ATM
Operating temperature: -10°C ~ 50°C
Wireless connectivity: Bluetooth 4.2 BLE

09 Specifications

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause
undesired operation.

FCC ID: 2AC8UXMSH05HM

Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV technician for help.

ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevicecan be
usedinportable exposureconditionwithoutrestriction.
Please take aention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

Regulatory Notice

Disposal and Recycling Information

The symbol signifies that this product has to be disposed separately from ordinary
household wastes at its end of life. Please kindly be aware that this is your
responsibility to dispose electronic equipment at recycling centers so as to help
conserve natural resources.

This device is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.

For more regulatory information and product certification/compliance logos related to the
Xiaomi Band 3, please go to More -> About on your Xiaomi Band 3.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Anhui Huami Information Technology Co., Ltd.

(a Mi Ecosystem company)

Address: Room 1201, Building A4, National Animation Industry Base, No. 800 Wangjiang West Road,
Gaoxin District, Hefei, Anhui, China

For further information, please go to www.mi.com