Xiaomi XMSH05HM, Aqara Smart Socket ZigBee User Manual And Warranty Card

Smart wall outlet Aqara Smart Socket ZigBee Version

User manual and warranty card

Overview

Smart wall outlet Aqara Smart Socket ZigBee Version is a smart socket, that
uses the ZigBee wireless protocol, does not change the interior of the house, it
is more safe to use, it synchronizes with devices that have the function of the
Aqara multifunctional gateway (hereinaft er simpl y "gateway"), remote control,
turn on or off at a set time, view energy statistics, et c.

* This product can only be used within the premises, i t is recommended that
the installation be installed by professionals. Before installation, turn off the
main switch, after installation, turn on the main s witch, and connect a smart
wall outlet to the gateway using the mobile appli cat i on "Mi Home" (for more
details, see "Installation method" and "Adding a device").

1 – Indicator
2 – Button

XIAOMI-MI.COM

Installation

Smart wall socket Aqara Smart Socket ZigBee V ersion is easy to install, no
need to modify the original wiring, just install it i nst ead of a traditional wall
outlet, the specific installation steps are as follows:

1. Turn off the main power source switch, unscre w the screws on the back of
the socket, connect the supply wire to terminal L and the neutral wire to
terminal N, connect the ground wire to the terminal in the middle, tighten the
screws, the wiring diagram is shown below.

2. Using a flat screwdriver, open the front panel of the socket.

3. Using screws, fix the socket in the box on the wall.

XIAOMI-MI.COM