Xiamen Xindeco IOT Technology XDUR 840 User Manual

RFID Device Manual

Model：XDUR-840

Size：295mmx245mmx110.3mm

General description

Xiamen Xindeco IOT Technology Ltd.’s XDUR-840 is a high-performance UHF RFID

reader based on the Impinj R2000 chip. It is compliant with EPC C1 Gen2 / ISO

18000-6C and FCC modular approval requirements.

XDUR-840 has four (N type) antenna connectors thatcan be configured as four

mono-static antennas. It also supportsdense reader mode (DRM), anti-collision,

and Listen-Before-Talk (LBT) features. XDUR-840 has a long operating distance of

up to 9 meters when its adjustable TX power is set to 20 dBm with a 12 dBi

antenna. XDUR-840 is ideal for adding UHF RFID read/write capabilities to a wide

range of solutions, such as logistics, access control, anti-counterfeit and

industrial production process control systems.

XDUR-840uses Ethernet interfaces to connect to an external processor board or

PC host. Xiamen Xindeco IOT Technology Ltd. offers a starter kit to enable you to

design XDUR-840into your application quickly and easily.

This kit includes SDK, demo code,and documentation. With its excellent operating

range, and high quality UHF RFID technology, XDUR-840is the perfect solution for

RFID applications.

Features

Ø Complaint with EPC C1 Gen2 / ISO 18000-6Cand FCC modular approval

requirements

Ø Supporting Dense Reader Mode (DRM) and Listen-Before-Talk (LBT) features

Ø Meeting worldwide regulatory: FCC (US), SRRC (China), TELEC (Japan), NCC

(Taiwan)

Ø Four (N type) antenna connectors that can be configured as four mono-static

antennas

Ø Adjustable transmit output level control from 10 dBm to 33 dBm in 0.5 dB step

Ø Maximum tag read rate of over 100 tags per second

Ø Maximum tag read distance of 27 feet (9 m) with 12 dBi antenna

Ø Easy to use Starter Kit to shorten product development time

Specifications

Protocol

RFID EPCglobalGen 2 (ISO 18000-6C), DRM

Architecture

RFIDASIC IMPINJ R2000

Power

Voltage 100~240V~50/60Hz

Current Consumption Scan Mode : 0.3A (Max),

Idle Modes : 84mA (Typical)

Interface

Ethernet 100/100Mbps with speed and duplex auto negotiation

RF

AntennaConnector 4 N type antenna ports support antenna auto-tuning and

antenna failure checking, with VSWR less than 2:1

Frequency FCC (US) 902 - 928 MHz

SRRC (China) 920.5 - 924.5 MHz

TELEC (Japan) 916.8 - 923.4 MHz

NCC (Taiwan) 922 - 928 MHz