CONNECTING THE SCALE TO THE COMPUTER
Connect end B of the supplied USB cable at the back of the scale. Connect end A of the
cable to an available USB port. Now press ON/OFF key for the normal operation. PC will
automatically recognize the scale and install the appropriate driver. When scale is
connected to a USB port, the power adapter is not necessary.
SCALE BLUETOOTH CONNECTION
The scale is ready for Bluetooth connection after startup. For initial connection, the
Bluetooth host requires pairing with the scale. Enter ’0000’ as passkey when required t o
pair with the scale. Once paired and connected, the scale is now ready to receive
commands and send data.
SCALE CALIBRATION
Recalibration may be required if the load cell of the scale is overloaded due to dropping
something heavy on the scale, dropping the scale or other kind of misuse. (You need to
have 2kg weight to proceed with the user calibration).
Turn off the scale (if it is currently turned on) and remove any weight on the platform.
Press ON/OFF key and while the scale is performing its self test (display is Selftest….),
press TARE/AUTO-CAL key. The scale will enter user calibration mode and will ask for a
2kg weight to be put on the platform. Put 2kg weight and the scale will calibrate itself.
Once calibration is successful, remove the 2kg weight. The scale will restart and go to
weighing mode. To exit user calibration without completing, simply press CE key.
Note: If the weight placed is not 2kg, the calibration will not proceed and the scale will
keep on asking for 2kg weight. The calibration procedure has to be carried out in an
extremely calm and non vibrating environment as it will affect the accuracy of the scale.
OPERATING ENVIRONMENT AND TEMPERATURE
In order to operate correctly, the scale must be installed on a firm, level, flat surface.
The scale is designed to operate in a normal room temperature. If subjected to cold or
warm temperature, it should be allowed to reach the room temperature before operating.
USING THE SUPPLIED AC ADAPTER
Connect the AC adapter into the power jack and the output outlet on the rear side of
the scale. This adaptor is center negative 9V.
USB and BT Enabled Precision Digital Scale
Model Elane PS2000 USB/BT 10kg Scale
Max 10kg, d = 0.2g
3 way power: USB, AC Adapter or Battery
FEATURES AND FUNCTIONS
Weighs in various units:
Counting Function – Counts number of items placed on the platform based from
sampling made
Memory – Stores and memorizes the number of items counted
Memory Add – Adds the current number of items to the value stored in memory
Stored Sample – Samples items using the programmed number of samples
Hold Display – Freezes the scale display when weighing items that block the scale’s LCD
USB Interface – Connects to application programs to capture scale weight and other USB
functions like tare and change of display units
Bluetooth Interface – Connects to Bluetooth hosts for sending and receiving commands
like weight display, tare, and others
Remote Operation from PC – The scale can receive commands from PC via USB or
Bluetooth to execute the functions remotely
SPECIFICATIONS
ERROR DISPLAY
OVERLOAD displays when the weight on the platform exceeds maximum capacity.
Low Bat blinks at the upper right corner of the LCD. Please replace the battery as soon as
possible. Operation with low battery is possible but the accuracy of the scale is affected.
DISPLAYING SCALE SERIAL NUMBER AND SOFTWARE VERSIONS
Turn off scale if it is turned on. Turn on scale and while display is Selftest……., press CE
key. The scale versions and serial number will be displayed in the LCD for about two
seconds then the scale will resume its startup process before normal operation.
Battery: 6 x AA Alkaline battery (not supplied)
User Manual
9 Gram (gm)
9 Kilogram (kg)
9 Pounds (LB)
9 Ounce (OZ)
9 Pounds and Ounces (LB OZ)
Capacity : 10kg
Graduation / Resolution : 0.2g
Minimum Weight detection : >0.2g
Min startup weight detection : >0.5g
Accuracy : ± 0.1% of the reading
Power consumption : Approx. 0.35 watts
Tare : Unlimited (up to scale’s maximum capacity)
Weight of Unit Scale : 1050g
Dimensions : 10.4” X 7.9” X 3.1”
Platform Size : 5.7” x 7.5”
Auto-off : Shuts down after 5 min of non use in battery
Power : AC adapter: 9V, 100mA (Optional)
USB: Self powered or
PREPARING THE SCALE FOR USE
1. Fix the weighing platform gently to the body of the scale via the four location
points. The slope edge of the platform should face the front part. (DO NOT press
hard on the platform).
2. Plug the main s adapter supplied with the scale into the mains and connect the
adapter's output plug to the input socket at the rear side of the scale.
3. Place the scale on a firm and even surface. Press the ON/OFF key on the
keyboard panel on the front side.
4. The scale will perform an automatic self test. After this, the scale will go to
weighing mode and weigh in grams by default. Now the scale is ready for
weighing and counting.
OPERATING THE SCALE
WEIGHING
Press the key labeled with the specific unit of measurement to change weight display to
that unit of weight (e.g. gm key for grams or OZ key for ounces weight display and so on).
The weight is updated on the LCD after the weight placed on the platform is stable.
SAMPLING
It is necessary to make a sample counting of the items to be counted first before the
COUNT function can be used.
New Count Sampling
1. Press NEW COUNT SAMPLING key.
2. Input the number of items available for sampling. Use keys 1, 2, 5, 10, 50, and
100 to increment the displayed value (e.g. pressing 1 adds 1 to the displayed
value, 10 adds 10, and so on).
3. Press NEW COUNT SAMPLING key again to confirm the final value.
4. The scale will check if there is weight on the scale and will ask user to remove if
there is any. After this, it will prompt to put the sample items on the platform
(please put exact items as entered above to ensure accurate sampling).
5. The scale will start to perform sampling according to the weight of the items on
the platform.
6. It will display “Sampling successful!” after a successful sampling is finished.
7. Press SAVED SAMPLE key to save this sampling value for next samplings to
perform on the scale. Press CE key to skip this part.
8. The scale will go to counting mode automatically. Put item s of the same kind on
the platform to start counting.
Sampling Using the Saved Sample Value
1. Press SAVED SAMPLE key.
2. The scale will check if there is weight on the scale and will ask user to remove if
there is any. After this, it will prompt to put the sample items on the platform
(please put exact items as displayed on the scale to ensure accurate sampling).
3. The scale will start to perform sampling according to the weight of the items on
the platform.
4. It will display “Sampling successful!” after a successful sampling is finished
and will go to counting mode automatically. Put items of the same kind on the
platform to start counting.
Notes:
The scale will count according to the last sampling made on the scale. T here is n o nee d to
make another sampling if the scale was turned off but will be used to count the same k ind
of items that were counted last time.
It is best to sample the scale once in a while if it is used to count one kind of item only.
COUNTING
Press COUNT key to count items according to the last sampling made on the scale. Put
items to count on the scale platform. The number of items (or the count) on the platform is
displayed on the LCD once the weight has stabilized.
To count items of another kind or another weight, press NEW COUNT SAMPLING key
and repeat above steps on how to make new count sampling on the scale.
Saving or Adding Count to Memory
While in counting mode and the count of items is displayed on the LCD, press M+ key to
add the current count to the count that is stored in memory. The scale will display “Added
to memory” once the operation is completed. Example, if the current count displayed on
the LCD is 24 and the current count that is stored in mem ory is 8, the new count stored i n
memory will be 32 after pressing M+ key.
Displaying Count Stored in Memory
While in counting mode, press MR key to display the value currently stored in memory.
Erasing Count Stored in Memory
While in counting mode, press MR key to display the count value that is currently stored in
memory. At this time, press CE key. Press MR key to erase the count value in memory or
CE key to exit without erasing the count value in memory. The scale will display “Count
value in memory erased!” once the operation is completed.
TARE FUNCTION
Tare function is useful if you have to take only the weight or count of ite ms that need to be
placed in a container. Put the empty container and press TARE key. The scale will zero
itself and now you can put the items to count or weigh. The scale will display only the
weight or count of the items excluding the container. “T” appears at the lower left corner
of the LCD when the Tare function is currently enabled.
HOLD DISPLAY FUNCTION
This function is useful when weighing items that block the scale’s display. Remove
anything from the platform. Press HOLD DISPLAY key then wait for the prompt to put the
item on the platform. The scale will get the weight of the scale for about 3 to 5 seconds.
The weight is displayed even if the item is removed. “H” appears at the lower left corner
of the LCD when Hold function is enabled. Press CE key to disable this function.
LINK FUNCTION