Xiamen Padmate Technology X16 User Manual

Instruction of X16 Bluetooth Headset

Thanks for purchasing Padmate X16 Bluetooth Headset. Please pair the headset with your
phone before using it, or you will not be able to use the headset. Please read through the
instruction below before using.

I. IMPORTANCE BEFORE USING:

The unit was designed and produced according to the related quality requests and safety
standards. Please read through the following operation instructions before using it:

- Read and keep well these instructions;

- Do not use or operate the it where it is forbidden of using, for example, airplanes and
hospitals;

- Do not use or operate the it according to the local laws and rules, for example, do not use
it when driving;

- Do not use or operate it when you are close to explosive or flammable sources, eg, gas
station etc;

- Do not hit or throw or open the unit by force as it may cause damage to the device;

- Do not put the unit near heat sources, e.g, stoves,heat registers and radiators etc;

- Keep the unit away from wet, water or other liquids that might cause short circuit or
malfunctions;

- Keep the unit and its accessories away from children to prevent being swallowed

- For special users, such as patients who use heart pacemakers, audiphones and built-in
cochlea devices etc, please follow the advice of doctors.

- Using it below minus 10 ℃ or above 50 ℃ could shorten the life span of battery.

II. About The Device

2.1 Packing list
1、Bluetooth headset (left & right) *1 pair
2、Instruction manual *1pcs
3、Micro-USB cable *1pcs
4、Silicon caps (L, S): 2 pairs

2.2 Device diagram
1、Multi Function button
2、Silicon earbuds
3、LED indicator
4、microphone
5、USB
6、volume +
7、volume –

Functional

operation

LED Indicator

Voice prompt

Power on

Press power button
2 seconds

Blue LED glitters

voice prompt ”
Power on”

Power off

Long press power
button 7 seconds

Red LED glitters

voice prompt ”
Power off”

2.3 Charging and battery
Please use the original USB cable provided for charging.
Warning: Using unmatched USB cable for charging might damage the device. Also, you
are not permitted to take the battery out of the device in case of damage and danger.
Suggested input power is DC 5V, 100mA-2A max.

and Operations

3.1 How to pair

1. Please set the distance between Bluetooth headset and mobile phone (or other
connecting device) within 1 meter, the closer the better.

2. Press power button for 2 seconds to turn on the headset (Blue LED on), then press
power button
for 3 seconds (Red and Blue LEDs alternately glitters) into the pairing status, waiting to
be paired.

3. Turn on the bluetooth application of your mobile phone and click to search Bluetooth

devices near your mobile. Once searched “X16” device name, please select it to pair.

After completely pairing, blue LED on, pairing successful and connected.

3.2 Multipoint connection

If your Bluetooth headset needs to connect two phones, you can use the following two
methods to pair:
Step 1: The first smart phone and headset paired successfully. Then turn off the first

phone's Bluetooth.

Step 2: Press the headset power button for 3 seconds to re-enter the pairing status,

pairing with the second phone.

Step 3: When the second phone is paired with the headset, open the first phone's

Bluetooth and the first phone is automatically connected to the headset.Then the
headset is connected to these two phones.

3.3 Operations