Xiamen Padmate Technology X13 User Manual

User Manual-PaMu

Instruction of PaMu True Wireless Stereo Headset

Thanks for purchasing Padmate PaMu True Wireless Stereo
Headset. You will need to pair the device with your mobile phone
or other Bluetooth enabled devices in order to experience its
great performance. Please read through the instruction manual
below before using.

1.IMPORTANCE BEFORE USING

The unit was designed and produced according to the related
quality requests and safety standards. Please read through the
following operation instructions before using it:

1. Read and keep well these instructions;

2. Do not use or operateit where it is forbidden of using, for
example, airplanes and hospitals;

3. Do not use or operateit according to the local laws and
rules, for example, do not use it when driving;

4. Do not use or operate it when you are close to explosive or
flammable sources, eg, gas station etc;

5. Do not hit or throw or open the unit by force as it may cause
damage to the device;

6. Do not put the unit near heat sources, eg, stoves, heat
registers and radiators etc;

7. Keep the unit away from wet, water or other liquids that might
cause short circuit or malfunctions;

8. Keep the unit and its accessories away from children to
prevent being swallowed

9. For special users, such as patients who use heart

pacemakers, audiphones and built-in cochlea devices etc,

please follow the advice of doctors.

10. Using it below minus 15 ℃ or above 55 ℃ could shorten the

life span of battery.

2.About The Device

2.1 Packing lis

1、Bluetooth headset (left & right) *1 pair
2、Instruction manual *1pcs
3、Quick start manual *1pcs
4、Micro-USB cable *1pcs
5、Silicon caps (L,S): 2 pairs
6、Charging cradle with power bank *1pcs

2.2 Device controls and locations

1、Multi Function touch button
2、Silicon earbuds
3、Fixation silicon hook
4、LED indicator
5、Microphone hole
6、Charging cradle
7、Decap button of
Charging cradle

2.3 Charging and battery

Please use the original USB cable for charging.
Warning: Using no original USB cable for charging might
damage the device. Also, you are not permitted to take the
battery out of the device in case of damage and danger.
Suggested input power is DC 5V, 100mA-2A max.

3.Operations

3.1 How to pair

Please keep the cradle fully charged first before using, the
headset can not be used if the cradle no power.

1. Make sure the cradle has enough power, take the left and
right of headsets out of the cradle, blue LED on(After take

the two headsets out of the cradle, the headset power on
automatically and at pairing mode) , then please take your
mobile phone close to the device. Suggested distance is

less than 1 meter.

2. Turn on the bluetooth application of your mobile phone and
click to search Bluetooth devices near your mobile. Once

searched “PaMu” device name, please select it to pair. After
completely paired, blue LED on and voice prompt “Pairing

successful”.

3.2 Operations

Please keep the cradle full charged first before using, the
Headsetscannotbe use if the cradle no power.
NOTE: The left and right headsets will automatically connect
after power on in factory. The left headset for pairing will be the
master headset while sub-headset for the right one.

3.3 Use them as two separate headsets:

If need to use them as two separate headsets, it has two
ways as below:
A、Turn on and pair either of the headset with your mobile

phone and power off the other headset.
B、If need to use them as two separate headsets at the same
time, suggested distance is more than 30 meter, turn on