Xiamen Hanin Electronic MLP2 User Manual
Mobile Receipt & Label Printer
Xiamen Hanin Electronic Technology Co.,Ltd.
ADD：
Room 305A, Angye Building, Pioneering Park,
Torch High-tech Zone, Xiamen, China 361009
Tel.：
+86-(0)592-5885993
Fax：
+86-(0)592-5885992
Web:
www.hprt.com
User Manual
MLP2
STATEMENT
This manual content may be altered without permission, and Xiamen Hanin Electronic
Technology Co., Ltd. reserves the rights to make changes without notice in technology, spare
parts, hardware and software of the products. If more information is needed about the
products, please contact Xiamen Hanin Electronic Technology Co., Ltd. Without any written
permission from the company, any section of this manual is prohibited to be copied or
transferred in any form.
Copyright
This manual is printed in 2016, the copyright belongs to Xiamen Hanin Electronic Technology Co.
Ltd.
Printed in China
1.6 Version
Warnings :
This must be complied with in order to avoid any damage to the human body and to the
equipment.
This is showing the important information and tips for the printer operating.
Due to continuous update of product, please take in kind of real machine, such as
accessories, programs etc.
REVISION RECORDS
REV.
DATE
DESCRIPTION
Drawn
Checked
Approved
1.0
2013.08.01
First edition
Chenweihua
Lin yang
Ren xiaowei
1.1
2013.08.16
1. Add charging safety precautions.(P12)
Chenweihua
Lin yang
Ren xiaowei
1.2
2014.12.03
1.Add Bluetooth function, interface and
driver.
Cui Xiao
Yang Kaiqu
Ren Xiaowei
1.3
2015.01.04
1.Add Chapter 6 Troubleshooting.
Cui Xiao
Yang Kaiqu
Ren Xiaowei
1.4
2015.09.29
1.Add 3.8 Menu Operation.
Lin Yun
Yang Kaiqu
Ren Xiaowei
1.5
2016.01.22
1.WIN10 system is supported for usage.
2.Modify the memory of bitmap.
Lin Yun
Yang Kaiqu
Ren Xiaowei
1.6
2016.03.21
1.Update the printer specification
Lin Yun
Yang Kaiqu
Ren Xiaowei
1.7
2016.05.31
1.Update the printer specification
Lin Yun
Yang Kaiqu
Ren Xiaowei
1.8
2016.07.25
Update the printer specification
Wu Zhenrong
Yang Kaiqu
Ren Xiaowei
Contents
■ MANUAL INFORMATION
■ IMPORTANT SAFETY INSTRUCTIONS
CHAPTER 1 APPEARANCE AND ACCESSORIES
1.1 Packing List
1.2 Appearance
CHAPTER 2 SPECIFICATION
CHAPTER 3 INSTALLATION & USAGE
3.1 Battery Installation
3.2 Battery Charging
3.3 Paper Loading
3.3.1 Peel Mode
3.3.2 Tear Bar Mode
3.3.3 Paper Guide
3.4 Belt Clip Usage
3.5 Control Panel
3.6 Self-test
...............................................................................................................................
..............................................................................................................................
...................................................................................................................................
...................................................................................................................
................................................................................................
....................................................................................................................
.....................................................................................................
..................................................................................................................
....................................................................................................................
........................................................................................................................
...................................................................................................................
............................................................................................................
................................................................................................................
.......................................................................................................................
..........................................................................................................................
......................................................................................
1
2
5
5
6
7
9
9
10
11
11
12
12
13
13
14
3.7 Peripherals Connection
3.7.1 Bluetooth Connection
3.7.2 Interface Cable Connection
3.8 Menu Operation
CHAPTER 4 INTERFACE
4.1 Power Interface
4.2 USB Interface
4.3 RS-232 Interface
CHAPTER 5 PRINTER CLEANING
CHAPTER 6 TROUBLESHOOTING
....................................................................................................................
.........................................................................................................................
......................................................................................................................
..........................................................................................................................
.....................................................................................................................
.........................................................................................................
................................................................................................
.......................................................................................
..........................................................................................................
.........................................................................................................
15
15
15
16
19
19
19
19
20
21
MLP2 User Manual
1
1.Windows Driver Manual
2.Printer Utility Tool Manual
3.Programming Manual
4.Bluetooth Manual
■ MANUAL INFORMATION
This user manual contains basic information for product usage as well as for emergency
measures that may be required.
※ The following separate manuals provide more detailed content on various technological
issues and areas.
This manual provides information on the installation instructions and main functions of the
Windows Driver.
This manual provides information on the usage of software for function selection of this
product, operating condition modification, etc.
This manual provides information on label printer commands.
This manual describes how to connect terminals (PDAs, PCs, etc.) with Bluetooth functionality.
MLP2 User Manual
2
1) Be sure to use the specified battery and power charger provided by our company,
2) Don’t put the battery into fire or water, don’t disassemble or modify the battery, don’t be
3) If the printer would not be used for a long time, be sure to take off the battery, otherwise
4) Please do not open the paper case cover when it is printing or just when printing is over, do
1) Water or other liquid should not spill into the printer, also the printer should not be expose
2) Please do not open the paper case cover when it is printing, otherwise the printer may
3) If print with serial interface, should not unplug the interface cable in the course of printing,
4) When print with Bluetooth interface, the communication distance should be within 10
5) Too high (40℃) or too low (0℃) temperature and too high (85％) or too low (20％) relative
6) The print paper in poor quality or stored for too long time also may reduce the print quality
1) The printer should be placed in such an environment that the temperature is between
■
IMPORTANT SAFETY INSTRUCTIONS
In using the present appliance, please keep the following safety regulations in order to prevent
any hazard or material damage.
1.Safety Precautions
connection to an improper power charger may cause fire, explosion or damage to the
printer.
short circuit, otherwise may result in injury or fire or even explosion.
the battery may leak liquid which is corrosive, if improper operation causes battery leak,
and the liquid is spattered on the skin or clothes, please wash it with water, if spattered into
the eyes, please rinse them with water thoroughly and see a doctor.
not touch the print head with hand or body, overheat may cause scald.
2. Operation Precautions
to the rain, or else may cause printer damage.
work improperly.
or else some printing data may be lost.
meters, otherwise the printer doesn’t print or prints rubbish codes.
humidity both effect the print quality.
even damage the printer.
3.Storage Precautions
-20℃ and 70℃, and the relative humidity is between 5% and 95%.
MLP2 User Manual
3
2) If the printer will be stored for a long time, pleas be sure to take out the battery, otherwise
3) Normal thermal paper can’t be kept too long, if you need to keep the receipt for a long
4) The print paper should be keep away from high temperature environment and point-blank
4.Battery Safety Precautions
1) Ignore the following instructions may cause battery overheating, fire, explosion, damage
2) Do not allow water, sea water from entering or leaking into the battery. If the batteries
3) Do not use or place the battery nearby the stove or other high temperature places.
4) When charging, use a specified charger. Other conditions (high temperature, high
5) Battery clearly marks with positive and negative. When connect the battery with the
6) Do not make the battery contact with the power outlet and/or car cigarette lighter socket.
7) Do not heat the battery or put the battery into fire. This may melt insulation material
8) Do not use the battery with contrary (+) and (-) location. In the charging process, this will
may damage the battery and printer.
period, please choose long term effective thermal paper.
sunshine.
and / or performance, and reduced product life.
internal safety device burn, when charging it, it may produce abnormal current and/or
voltage, or abnormal chemical reaction when charging it, then may cause the battery
overheating, fire and/or explosion.
Excessive heat maybe damage the resin shell and/or the insulation materials, thereby cause
short-circuit inside the battery, then the battery may be overheated, burning and/or
explosion.
pressure/high current, using the modified battery charger, etc.) excluded here may result in
over-charging the battery and abnormal current and/or voltage, cause abnormal chemical
reaction, and may cause the battery overheat, light and/or explosion.
charger and/or printer, be sure to verify the correct battery orientation. Reverse insertion
will cause the reverse charging and may cause abnormal chemical reaction, and then may
cause the battery overheat, ignite, and/or explosion.
This may cause high pressure and excessive current, and lead to the battery overheat,
burning and/or explosion.
and/or damage safety devices or safety equipment, then ignite electrolytic solution, and
cause the battery overheat, burning and/or explosion.
cause the reverse charging and may cause abnormal chemical reaction. During use, may
appear unpredictable current exception, and cause the battery overheat, ignite, and/or
explosion.
MLP2 User Manual
4
9) Do not make the battery (+) and (-) contact with any metal. Also, do not carry along or store
10) Do not throw or attack the battery heavily. If internal safety device of the batteries burn,
This mark shown on the product or its literature indicates that the corresponding
item should not be discarded at the end of its working life with other household
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate marked items from other types of
batteries with metal objects, such as necklaces, hair clips and so on. Battery internal short
circuit may cause excessive current, and lead to the battery overheat, ignite, and/or
explosion and the adjacent metal objects (necklaces, hairpins, etc.) may be overheating.
the battery charging may cause any abnormal current and/or voltage, and abnormal
chemical reaction, and lead to the battery overheat, ignite, and/or explosion.
5.Other Precautions
The copyright for this user manual and various other manuals is property of the HPRT
Corporation. Any copying or conversion into electronic firm and saving of this material without
the express written permission of HPRT Corporation. is strictly prohibited. Use of the
information contained in this manual is not subject to any patent liability. This manual has been
prepared with utmost care and attention to detail but may contain certain errors and/or
omissions. HPRT Corporation. is not legally liable for any damages resulting from the use of the
information in this manual. HPRT Corporation. and its affiliates are not legally liable (United
States excluded) for any damages, loss, costs, and/or expenses that result from the breakdown,
malfunction, and/or misuse of the product due to violation or neglect of the operation and
maintenance information and instructions provided by the HPRT Corporation., as well as from
the unauthorized alteration, repair, and/or modification of the product by the user and/or third
party. HPRT Corporation. is not legally liable for any damages and/or issues resulting from the
use of options and/or parts that are not authentic HPRT products or authorized products.
6.WEEE (Waste Electrical and Electric Equipment)
waste and recycle them responsibly to promote the sustained reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office for details of where and how they can conduct environmentally safe
recycling of such items. Commercial users should contact their suppliers and check the terms
and conditions of purchase contracts. This product should not be combined with other
commercial waste for disposal.
Loading...