Xhorse CONDOR XC-Mini User Manual
Automatic Key Cutting MachineCONDOR XC-MINI
.
CONDOR
Automatic Key Cutting Machine
XC-MINI
User Manual
Automatic Key Cutting MachineCONDOR XC-MINI
TABLE OF CONTENTS
1）SA FET Y PRECAUTIONS AND WARNI NGS ---- ---------------- ----- -- - --------------1
2）GEN ER AL IN F O RM ATIO N -- -- -- - --- - --- - -- -- -- -- -- -- -- - --- - --- - --- - -- -- -- -- -- -- -- 2
3）PRODUCT PACKAGING CHECKLIST -----------------------------------------------------3
4）OVERVIEW
4. 1 SC H E MAT I C -- - - - - - - -- - - - -- - - - - - - - - - - -- - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - -- - - - - - 6
4. 2 CH A R AC T E RI S TI C S --- - - -- - -- - - -- - - -- - -- - -- - - -- - - -- - -- - -- - - -- - - -- - -- - -- - - -- - 7
4. 3 SPECIF ICATIO N S ----- ----- -- ------- ---- -- - ------ -------- ------- ------- -------- ----- 7
5）MACHINE INSTALLATION AND PREPARATION
5.1 INSTALLING THE CUTTER --------------------------------------------------------------8
5.2 REMOVING THE CUT T ER ---- ---- ---------- ---------- --------- -- ---------- -------- 9
5.3 CL AMP SA MPLE S ----- --- ---- --- - --- ---- --- --- -- -- --- ---- --- --- ---- --- ---- ---- -- 10
5.4 CL AMP SAMPL ES ---- --- --- ---- ---- --- ---- --- --- --- ---- --- ---- --- --- ---- --- - -- --11
6）OPERATING INSTRUCTIONS
6.1 HEIGHT LEVEL ADJUSTMENT -----------------------------------------------------12
6. 2 CLAM P CALIB RATIO N --- ---- ----- - ---- ----- ---- - --- ------ ----- ----- ----- ----- --14
6.3 CUTTING CALIBRATION ---------------------------------------------------------------17
6.4 HOW TO USE KEY DATABASE -----------------------------------------------------20
6.5 HOW TO USE KEY DUPLICATION ------------------------------------------------------23
6.6 HOW TO USE CUT BY BIT TING ------------ ---------------------------------- ----26
6. 7 HOW TO USE FIND BITT ING ---- --- ----- --- -------- - ---------- -- -------- -------- 30
7 ON L INE UP DATE ---- --- --- --- --- --- ---- -- ---- -- - -- ---- -- ---- --- --- --- --- ---- --- -- - 33
Automatic Key Cutting MachineCONDOR XC-MINI
1
1．Safety Precautions and Warnings
To prevent personal injury or machine damage, users should carefully observe the
instructions provided by this operation manual and adopt the following safety precautions
：
Always operate the machine under the safe condition
Wear safety glasses that meets ANSI standards
Keep protective shield closed when machine is operating
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving parts.
Do NOT leave the machine while it is operating
Do not use damaged or loosen power cord and power outlet
Unplug the power cord when not in use for a long time
Do not place the machine in any wet, oily, dusty area
Do not place any tool or container on the machine
Place the machine on a horizontal surface, which should be firm enough to carry the
weight of the machine..
Keep the machine clean and dry
Shut down the machine immediately when any exception occurs
Automatic Key Cutting MachineCONDOR XC-MINI
2
2．General Information
Thank you for choosing CONDOR XC-Mini Automatic Key Cutting Machine.
This manual serves as a guide for users of CONDOR XC-Mini Automatic Key Cutting
Machine. Please read it carefully before use. It is crucially important if you wish to operate
the machine safely and efficiently.
-- If exterior color of the machine changes,the final Color in kind prevail
-- Under the usage of instruction sheet，The warranty time is three years
--Even if within the warranty period, if the following occurs, certain maintenance costs will
not be free
：
The product malfunction caused by Not in accordance with the user manual
operation
The malfunction and damage caused by unauthorized repairs and alteration.
The product malfunction caused by the fall,crash and the improperly voltage
Damage due to force majeur
Long time use in harsh places or vehicles, ships equipped with caused by failure or
damage
The working condition caused pollution and old, will not replace the shell
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form, or by any means ( mechanical, electronic, photocopying, recording, or others), without permission of
XHorse. Due to continuous product improvement, the information contained in this manual is subject to change
without notice.
Automatic Key Cutting MachineCONDOR XC-MINI
3
3. Product Packaging Checklist
The whole package covers the following items, if missing, please contact your
dealer.There are four kinds of power cord,we only supply one of them based on the actual
demand of different countries.
Name
Image
Quantity
Description
2.5mmCutter
1
Cutting tool
(Ø2.5×Ø6×40L )
1.5mmCutter
1
Cutting tool
(Ø1.5×Ø6×40L )
1.0mm Probe
2
Detection tool
(Ø1.0×Ø6×40L )
2mm Allen wrench
1
Tool for tracer point
installation
Power cord (1.5m)
（optional）
1
Connect to power
（Chinese Standard）
Power cord (1.5m)
（optional）
1
Connect to power
（British Standard）
Power cord (1.5m)
（optional）
1
Connect to power
（American Standard）
Power cord (1.5m)
（
optional
）
1
Connect to power
（
European standard
）
USB cable (2.0m)
1
Connect machine to PC
Brush
1
Tool for cleaning the machine
Automatic Key Cutting MachineCONDOR XC-MINI
4
M1 Clamp
1
For Single/Double Sided Keys
M2 Clamp
1
For Channel-Track Keys
M3 Clamp
（
optional
）
For Ford FO21 & Citroen
SX9 Keys
KeyMachine body
1
Main body
Quality certificate
1
Product Packaging
Checklist
1
User Manual
1
Automatic Key Cutting MachineCONDOR XC-MINI
5
Attention:
-- Replace the cutter regularly to ensure the key cutting quality.
-- Users should check the stepper motor belt regularly. If excessive wear and tear occur, please
replace these parts to ensure the key cutting accuracy and the efficient operation of the machine
-- Please use the 10A fuse.
Automatic Key Cutting MachineCONDOR XC-MINI
6
4. Overview
4.1 Schematic
Protective shield
7’Touch screen
LED lights
Operation buttons
Cutter
Key locking knob
Clamp lock
Clamp
Emergency stop button
Probe
Automatic Key Cutting MachineCONDOR XC-MINI
7
4.2 Characteristics
Built-in Database
Multi-languages Support
7' Capacitive Touch Screen
3-Axis Precision Ball Screw Transmission
Cross Rail
All Aluminum Machine Body
Single machine with both Tracer/Cutter
Standardly include three clamps M1/M2/M3
Software supports online-update
Support Sided/Track/Dimple/Tibbe keys*
*Some Dimple/Tibbe keys need optional clamps
4.3 Specifications
Input Voltage
90V--264VAC
Input Frequency
47~63Hz
Consume
200W
Packing Dimensions
L450×W450×H350mm
Machine Dimensions
L265×W362×H301mm
Display
1024×600
Spindle Speeds
9000rpm
USB
USB2.0
Working Temperature
0~50℃
Humidity
10~90%
Net Weight
18Kg
Gross Weight
22.9Kg
Automatic Key Cutting MachineCONDOR XC-MINI
8
5. Installation
5.1 Installing the cutter
To Install the cutter
1） Put the cutter into the cutter hole and to the top limit position, ensure the section of cutter
and clamp lateral parallel
2） Turn the CUTTER LOCK SCREW clockwise, till the cutter is tightened.
Automatic Key Cutting MachineCONDOR XC-MINI
9
5.2 Removing the Cutter
To Remove the Cutter
1） Hold the cutter lightly, Turn the CUTTER LOCK SCREW counterclockwise
2） after the cutter loosen, remove it
Loading...