Xhorse CONDOR XC-009 User Manual
CONDOR
Mechanical Key Cutting Machine
XC-009
User Manual
XC-009
Mechanical Key Cutting Machine
CONTENTS
1 Safety Precautions .................................................................................. 5
2 General Information ............................................................................... 6
2.1 Machine Description........................................................................ 6
2.2 Characteristics ................................................................................. 6
3 Product Packaging Checklist ................................................................... 7
4 Overview ............................................................................................... 10
4.1 Schematic ...................................................................................... 10
4.2 Specifications ................................................................................. 11
4.3 Main Parts and Function Declaration ............................................ 13
4.3.1 Hand Wheel ............................................................................ 13
4.3.2 Skid Platform .......................................................................... 14
4.3.3 Micro-adjust slide ................................................................... 15
4.3.4 Clamp ...................................................................................... 16
4.3.5 Power Parts............................................................................. 17
5 Equipment Installing and Debugging .................................................... 18
5.1 Handle Installing ............................................................................ 18
5.2 Cutter Installing ............................................................................. 19
5.3 Micro-adjust Slide Calibration ....................................................... 20
5.3.1 Lateral Micro-adjust Slide Calibration .................................... 21
5.3.2 Longitudinal Micro-adjust Slide Calibration ........................... 22
5.4 Clamp Installing ............................................................................. 23
6 Use of Equipment ................................................................................. 24
6.1 Key Alignment ................................................................................ 24
6.1.1 Head spacing ........................................................................... 24
6.1.2 Shoulder spacing..................................................................... 25
6.2 Clamp cutting surface selection .................................................... 26
6.3Use of needle .................................................................................. 27
7 Maintenance ......................................................................................... 28
8 Quality assurance and after-sales instructions..................................... 28
9 Appendix ............................................................................................... 30
Mechanical Key Cutting Machine CONDOR XC-009
1 Safety Precautions
To prevent personal injure or machine damage, users should carefully observe the
instructions provided by this operation manual and adopt the following safety precautions:
Use the machine under the safe condition
Place the machine on a horizontal surface, which should be firm enough to carry
the weight of the machine.
Do not exposure machine in scorching sun or place the machine in any wet, oily,
dusty area.
Keep the machine clean and dry and keep a distance of 30cm from the wall for
ventilation.
Wear safety glass that meets ANSI standards.
When the machine is working, keep clothing, hair, etc. away from all moving
parts.
Do not leave the machine while it is operating.
Do not place anything on the machine while it is operating.
Power plug with ground wire must be connected when charging. Do not use
power plug that is out of power and loose.
Turn off the switch when the machine is not in use or in service.
Shut down the machine immediately when any exception occurs. The switch on
the left side of the machine.
Keep the machine out of reach of children.
Mechanical Key Cutting Machine CONDOR XC-009
2 General Information
2.1 Machine Description
Thank you for choosing CONDOR XC-009 Mechanical Key Cutting machine.
CONDOR XC-009 Mechanical Key Cutting machine is a portable special device specially
designed for global locksmiths. It is small in volume, light in weight and easy to carry.
It can quickly and accurately copy and process variety of automobile and resident mechanical
key types.
Please read it carefully before use. It is crucially important if you wish to operate the
machine safely and efficiently.
2.2 Characteristics
CONDOR XC-009 is a new generation of mechanical Key Cutting machine with the
following characteristics:
Beautifully designed, full of modernity and technology.
Integrated Casting, Aluminum structure, Durable.
Small volume, Light weight, Easy to carry
Ergonomics designed, More comfortable, simple and convenient.
Micro-adjusted guide for high-precision cutting requirements.
Built-in lithium battery, Super long endurance ability
Mechanical Key Cutting Machine CONDOR XC-009
Name
Image
Quantity
Description
Main Body
1
Key Machine body
Handle
1
Control handle,
accessory
processing
M6 screw
2
Fixed handle
Tools
1
Tools placed
Key spacer
2
stopper
2.5mm Allen
wrench
1
Tool for removing
3mm Allen
wrench
1
Tool for removing
4mm Allen
wrench
1
Tool for trimming
slide
3 Product Packaging Checklist
Mechanical Key Cutting Machine CONDOR XC-009
5mm Allen
wrench
1
Tool for trimming
slide
Tool change
rod
1
Change the cutter
19mm open
spanner
1
Change the cutter
file
1
Tool for polish
φ1.2mm
nozzle
cleaner
2
Tool for putting
the key
φ1.7mm
nozzle
cleaner
2
Tool for putting
the key
Power
Adapter
1
Charger Device
Battery
（Optional）
1
Power Device
Power cord
（1.5m）
（optional）
1
Connect to power
(Chinese
Standard)
Power cord
（1.5m）
（optional）
1
Connect to power
(British
Standard)
Mechanical Key Cutting Machine CONDOR XC-009
Power cord
（1.5m）
（optional）
1
Connect to power
(European
Standard)
Power cord
（1.5m）
（optional）
1
Connect to power
(American
Standard)
Brush
1
Tool for cleaning
Quality
certificate
and Product
Packaging
Checklist
1
Product delivery
inspection
certificate and
packing
statistics
User
Manual(Take
photo)
1
Key machine
installation and
operation
instructions
4 Overview
Micro-adjust slide
Power jack
Power switch
Cutter
Hand wheel
Main clamp
Handrail
Power display
LED switch
LED light
Shoulder space rod
Handle
Accessory clamp
4.1 Schematic
Mechanical Key Cutting Machine CONDOR XC-009
Loading...