Xerox M24-2776 User Manual

Fig. 1
Place the document(s) on the Document Feeder or Document Glass.

Fig. 3
Select Fax.

Fig. 4
On the Basic Features screen, make all appropriate selections.

Fig. 2
Select Menu.

Fig. 5
Press Scan Options, and make all appropriate selections.

Fig. 6
Press Send Options, and make all desired selections.

Fig. 7
Press On-Hook/Others, and make all appropriate selections.

Fig. 8
Using the numeric keypad, enter the telephone number of the remote
fax machine.

Standalone Faxing - 1 of 2

Note:

It is required by law, in some countries, that sender
information, name and telephone number, be programmed
in the machine before faxing.

Please refer to Entering Local Terminal Information
pamphlet for detailed instruction.

Standalone Faxing - 2 of 2

Fig. 11
Scanning documents screen will be displayed as seen in Fig. 11 as the
fax is transmitted.

Fig. 10
Press Start.

Fig. 9
The telephone number to be dialed will be shown on the screen.

Quick Start Guide

Standalone Faxing

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device, including FAX machines, to send any message unless such
message clearly contains in a margin at the top or bottom of each transmitted page or on the first page
of the transmission, the date and time it is sent and an identification of the business or other entity, or
other individual sending the message and the telephone number of the sending machine or such
business, other entity, or individual.To enter the telephone number identifying the machine and the
header text information (business name) please refer to "Entering Local Terminal Information"
pamphlet Part 2 of 2. To enter date and time please refer to "Entering Local Terminal Information"
pamphlet Part 1 of 2.

WorkCentre M24