Xerox iGen4 User Manual

1 of 20 Revision Dec 2007
Xerox iGen3 90/100/110 Digital Production Press Europe Paper and Specialty Media
Guide Jan 2008
The Xerox Guaranteed Media List
contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested and qualified by Xerox laboratories to guarantee consistent quality.
The Xerox Custom Media List
Contains custom media that has been tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment. Customers should validate the Best Practices for Operation are acceptable for their application. When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.
The Non-Xerox Tested Media List
contains non-Xerox branded paper and specialty media. Xerox tested many media products on the Xerox iGen3 90/100/110 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.
General Information Media observations made in this publication are based on tests conducted using standard images with moderate to heavy image area coverage. Test machines are maintained within specifications defined by user documentation.
This document will be updated regularly to reflect the most current media test results. Suggested machine adjustments as well as best practices for operation are included where applicable in order to optimize media performance.
Instructions for programming media, including specific attributes, listed in this document but not yet in the Xerox iGen3 90/100/110 Digital Production Press stock library can be found in the customer training manual or in the “Define New Stock” section of online help.
When using the Xerox DocuSP Controller, all stocks will be automatically connected to color profiles and calibration. To program a stock with non-default settings, see the DocuSP 3.7 Customer Documentation or the On-Line Help on the DocuSP Color Server: On­Line Help/Color Management/Using Color Profiles. When using a Creo DFE, color mapping is done using the Paper Stock Color.
Warranty Disclaimer
Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure their expectations are met. The quality of Xerox supplies is consistent from ream to ream and is backed by a 100% guarantee. The quality of non-Xerox branded paper may vary from ream to ream or carton to carton, so for optimum performance on Xerox color equipment, use only the best - Xerox supplies. To learn more about the benefits of using Xerox Supplies, please contact your Supplies Representative. 2003 Xerox Corporation. All rights reserved.
Xerox, The Document Company, the stylized X, and all Xerox names and product numbers mentioned in this publication are trademarks of Xerox Corporation. Other company trademarks are also acknowledged.
1 of 20 Revision Dec 2007
Xerox iGen3 90/100/110 Digital Production Press Europe Guaranteed Media List Jan 2008
The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally
optimized, designed and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media.
Stock Library Name (Full Media Name) It is imperative to utilize the bolded, abbreviated stock name for easy migration to future enhancements to the stock library and
media management tools.
Uncoated Papers
Drilled
Standard cut sizes
A4 A3 SRA3 Other Size
Xerox paper and specialty media are tested and qualified by Xerox laboratories to guarantee consistent quality.
Grammage
Weight (gsm) Weight of the
paper in grams
per square
meter
Sides Coated Coating Type Type Sequence Color
Thickness
(microns)
Cleanup Finish
Best Practices for Operation
XeroxColourImpress 80
(Xerox Colour Impressions 80 gsm)
XeroxColotech+GLD90
(Xerox Colotech + Gold 90 gsm)
XeroxColotech+GLD904HD
(Xerox Colotech + GOLD 90 gsm 4 Holed Drilled)
XeroxColotech+ 90
(Xerox Colotech + 90 gsm)
XeroxColotech+ 904HD
(Xerox Colotech + 90 gsm 4 Hole Drilled)
XeroxColourImpress 90
(Xerox Colour Impressions 90 gsm)
XeroxColotech+GLD100
(Xerox Colotech + GOLD 100 gsm)
XeroxColotech+GLD1004HD
(Xerox Colotech + Gold 100 gsm 4 Hole Drilled)
XeroxColotech+ 100
(Xerox Colotech + 100 gsm)
XeroxColotech+ 1004HD
(Xerox Colotech + 100 gsm 4 Hole Drilled)
XeroxColotech+ NW 100
(Xerox Colotech + Natural White 100 gsm)
003R97661 003R97662 80 Uncoated N/A Plain 0 White 91 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R97988 003R97990 003R97991 90 Uncoated N/A Plain 0 White 101 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
Yes 003R97989 90 Uncoated N/A Plain 0 White 101 Yes Regular
003R94641 003R94642 003R95838 90 Uncoated N/A Plain 0 White 97 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
Yes 003R97673 90 Uncoated N/A Plain 0 White 97 Yes Regular
003R97663 003R97664 003R97665 90 Uncoated N/A Plain 0 White 98 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R97993 003R97955 003R97956 100 Uncoated N/A Plain 0 White 110 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
Yes 003R97954 100 Uncoated N/A Plain 0 White 110 Yes Regular
003R94646 003R94647 003R95839
Yes 003R97674 100 Uncoated N/A Plain 0 White 110 Yes Regular
003R97102 003R97103 003R97275 100 Uncoated N/A Plain 0 White 109 Yes Regular
003R94648
(A3+)
(305 x 457mm)
100 Uncoated N/A Plain 0 White 110 Yes Regular
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
Stack quality and stack height may be affected due to media structure or high area coverage.
This media may have a mottled appearance due to poor paper formation (image density and gloss).
Stack quality and stack height may be affected due to media structure or high area coverage.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
Stack quality and stack height may be affected due to media structure or high area coverage.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
the latest Customer Maintenance Manual Section 3.
the latest Customer Maintenance Manual Section 3.
the latest Customer Maintenance Manual Section 3.
the latest Customer Maintenance Manual Section 3.
XeroxColourImpress 100
(Xerox Colour Impressions 100 gsm)
XeroxColotech+GLD120
(Xerox Colotech + GOLD 120 gsm)
XeroxColotech+ 120
(Xerox Colotech + 120 gsm)
XeroxColourImpress 120
(Xerox Colour Impressions 120 gsm)
XeroxColotech+GLD160
(Xerox Colotech + GOLD 160 gsm)
XeroxColourImpress 160
(Xerox Colour Impressions 160 gsm)
XeroxColotech+ 160
(Xerox Colotech + 160 gsm)
003R97666 003R97667 003R97668 100 Uncoated N/A Plain 0 White 110 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R97958 003R97959 003R97960
003R94651 003R94652 003R95840
003R98685 003R97669 003R97670 120 Uncoated N/A Plain 0 White 125 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R97963 003R97964 003R97965 160 Uncoated N/A Plain 0 White 158 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R98007 003R98008 003R98686 160 Uncoated N/A Plain 0 White 170 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R94656 003R94657 003R94658 003R95841 160 Uncoated N/A Plain 0 White 170 Yes Regular
003R97961
(iGen3 Max Size)
(364 x 521mm)
003R94653
(A3+)
(305 x 457mm)
120 Uncoated N/A Plain 0 White 125 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
120 Uncoated N/A Plain 0 White 129 Yes Regular
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
the latest Customer Maintenance Manual Section 3.
the latest Customer Maintenance Manual Section 3.
2 of 20 Revision Dec 2007
Xerox iGen3 90/100/110 Digital Production Press Europe Guaranteed Media List Jan 2008
The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally
optimized, designed and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media.
Stock Library Name (Full Media Name) It is imperative to utilize the bolded, abbreviated stock name for easy migration to future enhancements to the stock library and
media management tools.
XeroxColotech+ NW 160
(Xerox Colotech + Natural White 160 gsm)
Drilled
Standard cut sizes
A4 A3 SRA3 Other Size
003R95956 003R95957 003R97276 160 Uncoated N/A Plain 0 White 157 Yes Regular
Xerox paper and specialty media are tested and qualified by Xerox laboratories to guarantee consistent quality.
Grammage
Weight (gsm) Weight of the
paper in grams
per square
meter
Sides Coated Coating Type Type Sequence Color
Thickness
(microns)
Cleanup Finish
Best Practices for Operation
XeroxColotech+GLD200
(Xerox Colotech + GOLD 200 gsm)
XeroxColotech+ 200
(Xerox Colotech + 200 gsm)
XeroxColotech+ NW 200
(Xerox Colotech + Natural White 200 gsm)
XeroxColotech+GLD220
(Xerox Colotech + GOLD 220 gsm)
XeroxColotech+ 220
(Xerox Colotech + 220 gsm)
XeroxColotech+GLD250
(Xerox Colotech + GOLD 250 gsm)
XeroxColotech+ 250
(Xerox Colotech + 250 gsm)
XeroxColourImpress 250
(Xerox Colour Impressions 250 gsm)
XeroxColotech+GLD280
(Xerox Colotech + GOLD 280 gsm)
XeroxColotech+ 280
(Xerox Colotech + 280 gsm)
XeroxColotech+GLD300
(Xerox Colotech + GOLD 300 gsm)
003R97967 003R97968 003R97969 200 Uncoated N/A Plain 0 White 196 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R94661 003R94662 003R95842
003R94663
(A3+)
(305 x 457mm)
200 Uncoated N/A Plain 0 White 216 Yes Regular
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
the latest Customer Maintenance Manual Section 3.
003R95958 003R95959 003R97277 200 Uncoated N/A Plain 0 White 207 Yes Regular
003R97971 003R97972 003R97973 220 Uncoated N/A Plain 0 White 215 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R94668 003R94669 003R95843
003R94670
(A3+)
(305 x 457mm)
220 Uncoated N/A Plain 0 White 239 Yes Regular
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
the latest Customer Maintenance Manual Section 3.
003R97975 003R97976 003R97977 250 Uncoated N/A Plain 0 White 245 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R94671 003R94672 003R95844
003R94673
(A3+)
(305 x 457mm)
250 Uncoated N/A Plain 0 White 249 Yes Regular
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
the latest Customer Maintenance Manual Section 3.
003R98687 003R97671 003R97672 250 Uncoated N/A Plain 0 White 250 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R97979 003R97980 003R97981 280 Uncoated N/A Plain 0 White 270 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
003R97097 003R97098 003R97099
003R97983 003R97984 003R97985
003R97660
(iGen3 Max Size)
(364 x 521mm)
003R97986
(iGen3 Max Size)
(364 x 521mm)
280 Uncoated N/A Plain 0 White 291 Yes Regular
300 Uncoated N/A Plain 0 White 300 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
the latest Customer Maintenance Manual Section 3.
XeroxColotech+GLD350
(Xerox Colotech + GOLD 350 gsm)
Coated Two Side C2S
XeroxColotech+ G 120
(Xerox Colotech + Gloss Coated 120 gsm)
XeroxColotech+ S 120
(Xerox Colotech + Silk Coated 120 gsm)
XeroxColourImpresG120
(Xerox Colour Impressions Gloss 120 gsm)
XeroxColotech+ G 140
(Xerox Colotech + Gloss Coated 140 gsm)
XeroxColotech+ S 140
(Xerox Colotech + Silk Coated 140 gsm)
003R98625
003R98626
(iGen3 Max Size)
(364 x 521mm)
003R97574 003R97575 003R97576 120
003R97592 003R97593 003R97594 120
003R97886 003R97887
003R97888
(iGen3 Max Size)
(364 x 521mm)
003R97577 003R97578 003R97579 140
003R97595 003R97596 003R97597 140
350 Uncoated N/A Plain 0 White 350 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).
Coated Two
Coated Two
Coated Two
120
Coated Two
Coated Two
Gloss Plain 0 White 96 Yes Smooth
Sides
Semi-gloss Plain 0 White 115 Yes Smooth
Sides
Gloss Plain 0 White 96 Yes Smooth
Sides
Gloss Plain 0 White 118 Yes Smooth
Sides
Semi-gloss Plain 0 White 135 Yes Smooth
Sides
3 of 20 Revision Dec 2007
Xerox iGen3 90/100/110 Digital Production Press Europe Guaranteed Media List Jan 2008
The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally
optimized, designed and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media.
Stock Library Name (Full Media Name) It is imperative to utilize the bolded, abbreviated stock name for easy migration to future enhancements to the stock library and
media management tools.
Coated Two Side Heavy C2S
Drilled
Standard cut sizes
A4 A3 SRA3 Other Size
Xerox paper and specialty media are tested and qualified by Xerox laboratories to guarantee consistent quality.
Grammage
Weight (gsm) Weight of the
paper in grams
per square
meter
Sides Coated Coating Type Type Sequence Color
Thickness
(microns)
Cleanup Finish
Best Practices for Operation
XeroxColotech+ G 170
(Xerox Colotech + Gloss Coated 170 gsm)
XeroxColotech+ S 170
(Xerox Colotech + Silk Coated 170 gsm)
XeroxColotech+ G 210
(Xerox Colotech + Gloss Coated 210 gsm)
XeroxColotech+ S 210
(Xerox Colotech + Silk Coated 210 gsm)
XeroxColourImpresG210
(Xerox Colour Impressions Gloss 210 gsm)
XeroxColotech+ G 250
(Xerox Colotech + Gloss Coated 250 gsm)
XeroxColotech+ S 250
(Xerox Colotech + Silk Coated 250 gsm)
XeroxColotech+ G 280
(Xerox Colotech + Gloss Coated 280 gsm)
XeroxColotech+ S 280
(Xerox Colotech+ Silk Coated 280 gsm)
XeroxColotech+ G 350
(Xerox Colotech + Gloss Coated 350 gsm)
XeroxColotech+ S 350
(Xerox Colotech+ Silk Coated 350 gsm)
003R97580 003R97581 003R97582 170
003R97598 003R97599 003R97600 170
003R97583 003R97584 003R97585
003R97601 003R97602 003R97603
003R97889 003R97890
003R97586 003R97587 003R97588 250
003R97604 003R97605 003R97606 250
003R97589 003R97590 003R97591
003R97607 003R97608 003R97609
003R98701 350
003R98700 350
003R11326
(iGen3 Max Size)
(364 x 521mm)
003R11350
(iGen3 Max Size)
(364 x 521mm)
003R97891
(iGen3 Max Size)
(364 x 521mm)
003R11327
(iGen3 Max Size)
(364 x 521mm)
003R11351
(iGen3 Max Size)
(364 x 521mm)
Coated Two
Coated Two
Coated Two
210
Coated Two
210
Coated Two
210
Coated Two
Coated Two
Coated Two
280
Coated Two
280
Coated Two
Coated Two
Gloss Plain 0 White 144 Yes Smooth
Sides
Semi-gloss Plain 0 White 164 Yes Smooth
Sides
Gloss Plain 0 White 181 Yes Smooth
Sides
Semi-gloss Plain 0 White 203 Yes Smooth
Sides
Gloss Plain 0 White 183 Yes Smooth
Sides
Gloss Plain 0 White 212 Yes Smooth
Sides
Semi-gloss Plain 0 White 242 Yes Smooth
Sides
Gloss Plain 0 White 249 Yes Smooth
Sides
Semi-gloss Plain 0 White 272 Yes Smooth
Sides
Gloss Plain 0 White 309 Yes Smooth
Sides
Gloss Plain 0 White 312 Yes Smooth
Sides
Specialties- Labels
XeroxLabelHSLL 1up
(Xerox High Speed Laser Labels 1 up)
XeroxLabelHSLL 8up
(Xerox High Speed Laser Labels 8 up)
XeroxLabelHSLL 10up
(Xerox High Speed Laser Labels 10 up)
XeroxLabelHSLL 16up
(Xerox High Speed Laser Labels 16 up)
XeroxLabelHSLL 24up
(Xerox High Speed Laser Labels 24 up)
XeroxLabelWRC 1up
(Xerox Labels White with Rounded Corners 1 up)
XeroxLabelWRC 2up
(Xerox Labels White with Rounded Corners 2 up)
XeroxLabelWRC 6up
(Xerox Labels White with Rounded Corners 6 up)
XeroxLabelWRC 8up
(Xerox Labels White with Rounded Corners 8 up)
XeroxLabelWRC 14up
(Xerox Labels White with Rounded Corners 14 up)
003R96169 140 Uncoated N/A Plain 0 White 164 No Smooth
003R96283 140 Uncoated N/A Plain 0 White 164 No Smooth
003R96284 140 Uncoated N/A Plain 0 White 164 No Smooth
003R96281 140 Uncoated N/A Plain 0 White 164 No Smooth
003R96282 140 Uncoated N/A Plain 0 White 164 No Smooth
003R91225 140 Uncoated N/A Plain 0 White 146 No Smooth
003R97525 140 Uncoated N/A Plain 0 White 146 No Smooth
003R96288 140 Uncoated N/A Plain 0 White 146 No Smooth
003R91224 140 Uncoated N/A Plain 0 White 146 No Smooth
003R96289 140 Uncoated N/A Plain 0 White 146 No Smooth
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Simplex only recommended.
Simplex only recommended.
Simplex only recommended.
Simplex only recommended.
Simplex only recommended.
Simplex only recommended.
Simplex only recommended.
Simplex only recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
4 of 20 Revision Dec 2007
Xerox iGen3 90/100/110 Digital Production Press Europe Guaranteed Media List Jan 2008
The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally
optimized, designed and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media.
Stock Library Name (Full Media Name) It is imperative to utilize the bolded, abbreviated stock name for easy migration to future enhancements to the stock library and
media management tools.
XeroxLabelWRC 15up
(Xerox Labels White with Rounded Corners 15 up)
XeroxLabelWRC 16up
(Xerox Labels White with Rounded Corners 16 up)
XeroxLabelWRC 18up
(Xerox Labels White with Rounded Corners 18 up)
XeroxLabelWRC 21up
(Xerox Labels White with Rounded Corners 21 up)
XeroxLabelWRC 24up
(Xerox Labels White with Rounded Corners 24 up)
XeroxLabelWRC 65up
(Xerox Labels White with Rounded Corners 65 up)
Drilled
Standard cut sizes
A4 A3 SRA3 Other Size
003R97259 140 Uncoated N/A Plain 0 White 146 No Smooth
003R96296 140 Uncoated N/A Plain 0 White 146 No Smooth
003R96297 140 Uncoated N/A Plain 0 White 146 No Smooth
003R96298 140 Uncoated N/A Plain 0 White 146 No Smooth
003R97526 140 Uncoated N/A Plain 0 White 146 No Smooth
003R93177 140 Uncoated N/A Plain 0 White 146 No Smooth
Xerox paper and specialty media are tested and qualified by Xerox laboratories to guarantee consistent quality.
Grammage
Weight (gsm) Weight of the
paper in grams
per square
meter
Sides Coated Coating Type Type Sequence Color
Thickness
(microns)
Cleanup Finish
Best Practices for Operation
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
XeroxLabelCL 1up
(Xerox Colour Laser Labels 1 up)
XeroxLabelCL 4up
(Xerox Colour Laser Labels 4 up)
XeroxLabelCL 6up
(Xerox Colour Laser Labels 6 up)
XeroxLabelCL 8up
(Xerox Colour Laser Labels 8 up)
XeroxLabelCL 14up
(Xerox Colour Laser Labels 14 up)
XeroxLabelCL 21up
(Xerox Colour Laser Labels 21 up)
XeroxLabelCL 24up
(Xerox Colour Laser Labels 24 up)
XeroxLabelCL CD
(Xerox Colour Laser Labels CD 2 up)
Specialties- Dividers
(Xerox Colotech + Tabs 5 bank reverse collated white dividers)
(Xerox Colotech + Tabs 10 bank reverse collated white dividers)
XeroxColotechTab R5B W
XeroxColotechTab R10B W
Xerox Dividers S6B W
(Xerox Dividers Straight Collated 6 Bank White)
003R93872 160 Uncoated N/A Plain 0 White 165 No Regular
003R95813 160 Uncoated N/A Plain 0 White 165 No Regular
003R93873 160 Uncoated N/A Plain 0 White 165 No Regular
003R93874 160 Uncoated N/A Plain 0 White 165 No Regular
003R93875 160 Uncoated N/A Plain 0 White 165 No Regular
003R95815 160 Uncoated N/A Plain 0 White 165 No Regular
003R97524 160 Uncoated N/A Plain 0 White 165 No Regular
003R97514 160 Uncoated N/A Plain 0 White 165 No Regular
003R97231
(A4+)
(223 x 297mm)
003R97232
(A4+)
(223 x 297mm)
003R91013
(A4+)
(223 x 297mm)
200 Uncoated N/A Precut Tab 5 White 216 No Regular
200 Uncoated N/A Precut Tab 10 White 216 No Regular
160 Uncoated N/A Full Cut Tab 6 White 170 No Regular For best performance, do not image within 2 mm of tab edge.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
Imaging over die cuts or label edges may adversely affect fuser roll life.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer Maintenance Manual Section 3. Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers. For best performance, do not image within 2 mm of tab edge. May need to use jogger for uniform stacking.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer Maintenance Manual Section 3. Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers. For best performance, do not image within 2 mm of tab edge. May need to use jogger for uniform stacking.
Simplex only recommended.
Simplex only recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
Short Edge Feed recommended.
Simplex only recommended.
XeroxDividers R10B R
(Xerox Dividers Reverse Collated 10 Bank Rainbow)
XeroxDividers R10B W
(Xerox Dividers Reverse Collated 10 Bank White)
XeroxDividers R12B R
(Xerox Dividers Reverse Collated 12 Bank Rainbow)
XeroxDividers R12B W
(Xerox Dividers Reverse Collated 12 Bank White)
XeroxDividers R3B W
(Xerox Dividers Reverse Collated 3 Bank White)
003R93988
(A4+)
(223 x 297mm)
003R91001
(A4+)
(223 x 297mm)
003R93987
(A4+)
(223 x 297mm)
003R91002
(A4+)
(223 x 297mm)
003R90871
(A4+)
(223 x 297mm)
160 Uncoated N/A Full Cut Tab 10 White 170 No Regular May need to use jogger for uniform stacking.
160 Uncoated N/A Full Cut Tab 10 White 170 No Regular
160 Uncoated N/A Full Cut Tab 12 White 170 No Regular
160 Uncoated N/A Full Cut Tab 12 White 170 No Regular
160 Uncoated N/A Precut Tab 3 White 170 No Regular
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
May need to use jogger for uniform
May need to use jogger for uniform
May need to use jogger for uniform
May need to use jogger for uniform
5 of 20 Revision Dec 2007
Xerox iGen3 90/100/110 Digital Production Press Europe Guaranteed Media List Jan 2008
The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally
optimized, designed and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media.
Stock Library Name (Full Media Name) It is imperative to utilize the bolded, abbreviated stock name for easy migration to future enhancements to the stock library and
media management tools.
XeroxDividers R4B W
(Xerox Dividers Reverse Collated 4 Bank White)
XeroxDividers R5B R
(Xerox Dividers Reverse Collated 5 Bank Rainbow)
XeroxDividers R5B W
(Xerox Dividers Reverse Collated 5 Bank White)
XeroxDividers R6B R
(Xerox Dividers Reverse Collated 6 Bank Rainbow)
XeroxDividers R6B W
(Xerox Dividers Reverse Collated 6 Bank White)
XeroxDividers R8B R
(Xerox Dividers Reverse Collated 8 Bank Rainbow)
Drilled
Standard cut sizes
A4 A3 SRA3 Other Size
Xerox paper and specialty media are tested and qualified by Xerox laboratories to guarantee consistent quality.
Grammage
Weight (gsm) Weight of the
003R90872
(A4+)
(223 x 297mm)
003R90878
(A4+)
(223 x 297mm)
003R90873
(A4+)
(223 x 297mm)
003R93992
(A4+)
(223 x 297mm)
003R91000
(A4+)
(223 x 297mm)
003R93990
(A4+)
(223 x 297mm)
paper in grams
Sides Coated Coating Type Type Sequence Color
per square
meter
160 Uncoated N/A Precut Tab 4 White 170 No Regular
160 Uncoated N/A Precut Tab 5 White 170 No Regular
160 Uncoated N/A Precut Tab 5 White 170 No Regular
160 Uncoated N/A Precut Tab 6 White 170 No Regular
160 Uncoated N/A Precut Tab 6 White 170 No Regular
160 Uncoated N/A Precut Tab 8 White 170 No Regular
Thickness
(microns)
Cleanup Finish
Best Practices for Operation
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
May need to use jogger for uniform
May need to use jogger for uniform
May need to use jogger for uniform
May need to use jogger for uniform
May need to use jogger for uniform
May need to use jogger for uniform
XeroxDividers S10B R
(Xerox Dividers Straight Collated 10 Bank Rainbow)
XeroxDividers S10B W
(Xerox Dividers Sraight Collated 10 Bank White)
XeroxDividers S12B W
(Xerox Dividers Straight Collated 12 Bank White)
XeroxDividers S5B W
(Xerox Dividers Straight Collated 5 Bank White)
XeroxDividers S6B W
(Xerox Dividers Straight Collated 6 Bank White)
Specialties- Cards
XeroxDocuCard 1up
(Xerox DocuCard 1 up)
XeroxValuPeel U 1up
(Xerox ValuPeelCard Uncoated 1 up)
XeroxValuPerf U 1up
(Xerox ValuPerfCard Uncoated 1up)
XeroxValuPeel C 1up
(Xerox Value Peel Card Coated 1 up)
003R97571
(500 sheet box)
003R91390
(A4+)
(223 x 297mm)
003R91014
(A4+)
(223 x 297mm)
003R91015
(A4+)
(223 x 297mm)
003R91012
(A4+)
(223 x 297mm)
003R91013
(A4+)
(223 x 297mm)
160 Uncoated N/A Full Cut Tab 10 White 170 No Regular
160 Uncoated N/A Full Cut Tab 10 White 170 No Regular
160 Uncoated N/A Full Cut Tab 12 White 170 No Regular
160 Uncoated N/A Precut Tab 5 White 170 No Regular
160 Uncoated N/A Precut Tab 6 White 170 No Regular
200 Uncoated N/A Plain 0 White 209 No Regular
003R97952 X 216 Uncoated N/A Plain 0 White 194 No Regular
003R97690 X 216 Uncoated N/A Plain 0 White 194 No Regular
003R97953 X 216
Coated One
Side
Gloss Plain 0 White 170 No Smooth
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media
Kit and Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
Stack quality and stack height may be affected due to media structure or high area coverage.
A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.
For feeding without a DocuCard Enabler Kit feed tray load max is 50-100 sheets. Load card inboard for Long
the latest Customer Maintenance Manual Section 3.
For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.
TAB may need to be cleaned prior to running media.
Edge Feed and trail edge for Short Edge Feed.
For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.
It is recommended to not image on back if laminated.
For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.
It is recommended to not image on back if laminated.
For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.
It is recommended to not image on back if laminated.
TAB may need to be cleaned prior to running media.
XeroxValuPerf C 1up
(Xerox ValuPerfCard Coated 1up)
XeroxDocuGlossC 1up
(Xerox DocuGloss Card 1up)
(Xerox Digital Color Special Advanced Media Business Cards)
XeroxDC BusCards
XeroxDocuMag C
(Xerox DocuMagnet Coated)
XeroxDocuMag U
(Xerox DocuMagnet Uncoated)
003R97677 X 216
Coated One
Side
Gloss Plain 0 White 170 No Smooth
003R97678 163 Uncoated N/A Plain 0 White 170 No Regular
003R97512 195 Uncoated N/A Plain 0 White 226 No Regular
003R96071 280
003R96072 280
C1S (Coated
One Side)
C1S (Coated
One Side)
Gloss Plain 0 White 194 No Smooth
Matte Plain 0 White 170 No Regular
For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.
It is recommended to not image on back if laminated.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
Stack quality and stack height may be affected due to media structure or high area coverage.
A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in For uniform image quality, do not image within 3 mm of card edges (side 1) or within 7 mm of tape edges (side
Stack quality and stack height may be affected due to media structure or high area coverage.
A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in
A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.
the latest Customer Maintenance Manual Section 3.
For uniform image quality do not image within 5 mm of card edge.
Load and stack 50-100 sheets maximum due to media structure.
TAB may need to be cleaned prior to running media.
For feeding without a DocuCard Enabler Kit feed tray load max is 50-100 sheets.
the latest Customer Maintenance Manual Section 3.
2).
For uniform image quality do not image within 5 mm of card edge.
For uniform image quality do not image within 5 mm of card edge.
Simplex only recommended
the latest Customer Maintenance Manual Section 3.
Simplex only recommended
6 of 20 Revision Dec 2007
i
d
p
d
y
g
y
g
s
g
s
p
d
p
d
p
d
p
d
p
d
p
d
Xerox iGen3 90/100/110 Digital Production Press Europe Guaranteed Media List Jan 2008
The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally
optimized, designed and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media.
Stock Library Name (Full Media Name) It is imperative to utilize the bolded, abbreviated stock name for easy migration to future enhancements to the stock library and
media management tools.
Specialties- Synthetic Films
Drilled
Standard cut sizes
A4 A3 SRA3 Other Size
Xerox paper and specialty media are tested and qualified by Xerox laboratories to guarantee consistent quality.
Grammage
Weight (gsm) Weight of the
paper in grams
per square
meter
Sides Coated Coating Type Type Sequence Color
Thickness
(microns)
Cleanup Finish
Best Practices for Operation
XeroxPremiumNeverTear95
(Xerox Premium NeverTear 95 micron)
XeroxPremiumNeverTear120
(Xerox Premium Never Tear 120 micron)
XeroxDuraPaper X250
(Xerox DuraPapaer X250)
Specialties- Other
Xerox UltraMagnet
(Xerox Ultra Magnet)
XeroxTransferPaper
(Xerox One Step Transfer Paper)
XeroxLasWinGraphiX C
(Xerox Laser Window GraphiX Clear)
XeroxLasWinGraphiX O
(Xerox Laser Window GraphiX Opaque)
XeroxTransWh 150 gsm
(Xerox Translucent White 150 gsm)
XeroxDocuPac M
(Xerox DocuPac Folders Matte)
Specialties- Carbonless
(Xerox Carbonless, 2 part, Straight PreCollated, White and
(Xerox Carbonless, 2 part, Straight PreCollated, White and
(Xerox Carbonless, 3 part, Reverse PreCollated, Pink, Yelllow
(Xerox Carbonless, 3 Part, Straight PreCollated, White, Yellow
(Xerox Carbonless, 4 part, Reverse PreCollated, Green, Pink,
(Xerox Carbonless, 4 part, Straight PreCollated, White,
(Xerox Carbonless, Coated Front and Back, Singles, White)
(Xerox Carbonless, Coated Front and Back, Singles , Yellow)
XeroxCarb2SWP
Pink)
XeroxCarb2SWY
Yellow)
XeroxCarb3RPYW
and White)
XeroxCarb3SWYP
and Pink)
XeroxCarb4RGPYW
Yellow and White)
XeroxCarb4SWYPB
Yellow,Pink and Blue)
XeroxCarbCBSingleW
(Xerox Carbonless, Coated Back, Singles, White)
XeroxCarbCFBSingleW
XeroxCarbCFBSingleY
XeroxCarbCFSingleP
(Xerox Carbonless, Coated Front, Single, Pink)
XeroxCarbCFSingleW
(Xerox Carbonless, Coated Front, Singles, White)
XeroxCarbCFsingleY
(Xerox Carbonless, Coated Front, Singles, Yellow)
No 003R98056 003R98057 003R98031 003R98032 125
No 003R98058 003R98059 003R98035 003R98036 155
003R97513 200 Uncoated N/A Plain 0 White 255 No Regular
003R98060 350
003R97949 003R97951 118
003R97494 003R98675 003R98676 003R98677 200
003R97511 003R97539 003R98678 003R98679 200
003R98199 200
007R96576 150
003R97353 180
003R99107 80 Uncoated N/A Ordered 2 White 110 Yes Regular
003R99105 80 Uncoated N/A Ordered 2 White 110 Yes Regular
003R99109 80 Uncoated N/A Ordered 3 White 110 No Regular
003R99108 80 Uncoated N/A Ordered 3 White 110 No Regular
003R99112 80 Uncoated N/A Ordered 4 White 110 No Regular
003R99111 80 Uncoated N/A Ordered 4 White 110 No Regular
003R99069 80 Uncoated N/A Plain White 110 No Regular
003R99070 80 Uncoated N/A Plain White 110 No Regular
003R99071 80 Uncoated N/A Plain Yellow 112 No Regular
003R99077 80 Uncoated N/A Plain Pink 107 No Regular
003R99075 80 Uncoated N/A Plain White 110 No Regular
003R99076 80 Uncoated N/A Plain Yellow 112 No Regular
Coated Two
Sides
Coated Two
Sides
Coated One
Side
Coated One
Side
Coated One
Side
Coated One
Side
Coated One
Side
Coated Two
Sides
Coated Two
Sides
Gloss Plain 0 White 95 Yes Smooth Static build up may affect media runnability and/or stacking.
Gloss Plain 0 White 120 Yes Smooth Static build up may affect media runnability and/or stacking.
Gloss Plain White 194 No Smooth
Gloss Custom 0 White 143 No Smooth
Gloss Transparency Clear 114 No Smooth
Gloss Transparency Clear 114 No Smooth
Gloss Transparency Clear 187 No Smooth
Matte Plain White 160 No Smooth
Matte Custom 0 White 223 No Smooth For uniform image quality, do not image within 10 mm of raised score or 2 mm of dimpled score
If image permanence adjustment is required, refer to ADJ 1-Pressure Roll Contact Arc Adjustment procedure
To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
To enable running Service must set NVM 6876 (LE Late tat TAR sensor Jam Offset) to maximum value.
For uniform image quality, do not image within 3 mm of die cut on back of decal.
For uniform image quality, do not image within 3 mm of die cut on back of decal.
This media may have a mottled appearance due to paper formation (image density and glo
Stack quality and stack height may be affected due to media structure or high area coverage.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
This media may have a mottled appearance due to paper formation (image density and gloss).
Optimization of decurler settings may be needed for best stacking and runnability.
the latest Customer Maintenance Manual.
Simplex only recommende
It is recommended that this media be run to stacker top tray.
Static build up may affect media runnability and/or stacking.
Feed from a lower tray only.
ut to top tray or bypass tray, if enable
Out
Simplex only recommended
Static build up may affect media runnability and/or stacking.
Simplex only recommended
Static build up ma
Static build up ma
Static build up may affect media runnability and/or stacking.
Deliver to stacker FACE DOWN to avoid stackin
Fuser Fluid II is recommended for duplex applications.
Reverse PreCollated
Fuser Fluid II is recommended for duplex applications.
Reverse PreCollated
Fuser Fluid II is recommended for duplex applications.
Reverse PreCollated
Fuser Fluid II is recommended for duplex applications.
Reverse PreCollated
Fuser Fluid II is recommended for duplex applications.
Reverse PreCollated
Fuser Fluid II is recommended for duplex applications.
Reverse PreCollated
Fuser Fluid II is recommended for duplex applications.
Fuser Fluid II is recommended for duplex applications.
Fuser Fluid II is recommended for duplex applications.
Fuser Fluid II is recommended for duplex applications.
Fuser Fluid II is recommended for duplex applications.
Fuser Fluid II is recommended for duplex applications.
affect media runnability and/or stackin
Simplex only recommended
affect media runnability and/or stackin
Simplex only recommended
roduct run face up to stacker is recommende
roduct run face up to stacker is recommende
roduct run face up to stacker is recommende
roduct run face up to stacker is recommende
roduct run face up to stacker is recommende
roduct run face up to stacker is recommende
issue
1 of 20 Revision Dec 2007
g
Xerox iGen3 90/100/110 Digital Production Press European CUSTOM Media List Jan 2008
The Xerox CUSTOM Media List contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.
Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.
Best Practices for Operation are outlined below.
Customers should validate the Best Practices for Operation are acceptable for their application.
*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*
When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.
CUSTOM media may be ordered through the Xerox Supply Account Manager.
Grammage
Weight (gsm)
Weight of the
paper in
rams
per square
meter
60 60 Uncoated N/A Plain White 86 No Regular
Thickness
(microns)
CleanupCoating Type Sides Coated Sequence Color
Best Practices for Operation
Stack quality and stack height may be affected due to media structure or high area coverage.
High area coverage with multilayer colors may be stressful on the fusing system.
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer
For additional image quality tips please contact the media hotline.
This is a generic starting point for this weight and type of media. Adjustments may need to be made to achieve optimum transfer and
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer
For additional image quality tips please contact the media hotline.
This is a generic starting point for this weight and type of media. Adjustments may need to be made to achieve optimum transfer and
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer
For additional image quality tips please contact the media hotline.
This is a generic starting point for this weight and type of media. Adjustments may need to be made to achieve optimum transfer and
If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer
For additional image quality tips please contact the media hotline.
This is a generic starting point for this weight and type of media. Adjustments may need to be made to achieve optimum transfer and
Simplex only recommended
Maintenance Manual Section 3.
ATA mode may help image quality.
or toner adhesion for individual media.
Maintenance Manual Section 3.
ATA mode may help image quality.
or toner adhesion for individual media.
Maintenance Manual Section 3.
ATA mode may help image quality.
or toner adhesion for individual media.
Maintenance Manual Section 3.
ATA mode may help image quality.
or toner adhesion for individual media.
It is imperative to utilize the bolded, abbreviated stock name for easy
migration to future enhancements to the stock library and media
Stock Library Name (Full Media Name)
management tools.
Uncoated
XeroxXmail60
(Xerox Xmail 60 gsm)
Textured Uncoated
XeroxHammerEmboss250
(Xerox Hammer Embossed 250 gsm)
XeroxLineEmbossed250
(Xerox line Embossed 250 gsm)
XeroxLinenEmbossed250
(Xerox Embossed Linen 250 gsm)
XeroxTextileEmboss250
(Xerox Textile Embossed 250 gsm)
Base Size Tested
A4 A3 short grain SRA3 FinishType
Other Size
XX
007R96574 250 250 Uncoated N/A Plain White 310 No Rough
007R96572 250 250 Uncoated N/A Plain White 330 No Rough
003R97691 250 250 Uncoated N/A Plain White 300 No Rough
007R96573 250 250 Uncoated N/A Plain White 300 No Rough
Synthetics
XeroxPremNeverTear195
(Xerox Premium NeverTear 195 micron)
XeroxPremNeverTear270
(Xerox Premium Never Tear 270 gsm)
XeroxPremNeverTear350
(Xerox Premium NeverTear 350 gsm)
003R98041 003R98042 003R98043 003R98044 260
003R98045 003R98046 003R98047 003R98048 300
003R98049 003R98050 003R98051 003R98052 350
Coated Two
Sides
Coated Two
Sides
Coated Two
Sides
Gloss Plain White 195 No Smooth
Gloss Plain White 270 No Smooth
Gloss Plain White 350 No Smooth
Static build up may affect media runnability and/or stacking.
Some side to side color difference may be seen if auto duplexing.
Some skew may be seen if auto duplexing.
Feed from a lower tray.
High static may impact inline finishing.
Static build up may affect media runnability and/or stacking.
Some side to side color difference may be seen if auto duplexing.
Some skew may be seen if auto duplexing.
Feed from a lower tray.
High static may impact inline finishing.
Static build up may affect media runnability and/or stacking.
Some side to side color difference may be seen if auto duplexing.
Some skew may be seen if auto duplexing.
Feed from a lower tray.
High static may impact inline finishing.
2 of 20 Revision Dec 2007
g
Xerox iGen3 90/100/110 Digital Production Press European CUSTOM Media List Jan 2008
The Xerox CUSTOM Media List contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.
Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.
Best Practices for Operation are outlined below.
Customers should validate the Best Practices for Operation are acceptable for their application.
*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*
When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.
CUSTOM media may be ordered through the Xerox Supply Account Manager.
Grammage
Weight (gsm)
Weight of the
paper in
rams
per square
meter
Coated Two
Sides
Thickness
(microns)
CleanupCoating Type Sides Coated Sequence Color
Gloss Plain White 145 No Smooth
Best Practices for Operation
Static build up may affect media runnability and/or stacking.
Some side to side color difference may be seen if auto duplexing.
Some skew may be seen if auto duplexing.
Feed from a lower tray.
High static may impact inline finishing.
Static build up may affect media runnability and/or stacking.
Some side to side color difference may be seen if auto duplexing.
Some skew may be seen if auto duplexing.
Feed from a lower tray.
High static may impact inline finishing.
Static build up may affect media runnability and/or stacking.
Some side to side color difference may be seen if auto duplexing.
Some skew may be seen if auto duplexing.
Feed from a lower tray.
High static may impact inline finishing.
It is imperative to utilize the bolded, abbreviated stock name for easy
migration to future enhancements to the stock library and media
Stock Library Name (Full Media Name)
management tools.
XeroxPremNeverTear145
(Xerox Premium NeverTear 145 microns)
XeroxPNeverTearBlue130
(Xerox Premium NeverTear Blue 130 microns)
XeroxPNeverTearGrn130
(Xerox Premium NeverTear Green 130 microns)
Base Size Tested
A4 A3 short grain SRA3 FinishTypeOther Size
003R98037 003R98038 003R98039 003R98040 195
XXXX200200Coated Two Sides Gloss Plain White 130 No Smooth
XXXX200200Coated Two Sides Gloss Plain White 130 No Smooth
XeroxPNeverTearPink130
(Xerox Premium NeverTear Pink 130 microns)
XeroxPNeverTearYell130
(Xerox Premium NeverTear Yellow 130 micron)
Specialties
(Xerox Business Reply Envelopes 1 up)
(Xerox Universal Paper Backed Transparency SRA3)
(Xerox Crystal Clear Self Adhesive Label)
(Xerox Glossy white Self Adhesive Label)
(Xerox DuraDocument Paper 703670PE)
(Xerox DuraDocument Paper 503650PT)
(Xerox DuraDocument Paper 504950PE)
XeroxBRE 1up
XeroxPBtrans SRA3
XeroxDuraPaperLabel
(Xerox DuraPaper label)
XeroxCrysClearLabel
XeroxGlossWhiteLabel
XeroxDuraDocPap703670PE
XeroxDuraDocPap503650PT
XeroxDuraDocPap504950PE
XXXX200200Coated Two Sides Gloss Plain White 130 No Smooth
XXXX200200Coated Two Sides Gloss Plain White 130 No Smooth
X 150 Uncoated N/A Plain 0 White 160 No Regular
003R98201 200
X X X 200 200
003R97244 003R97347 300 300
003R97245 003R97348 300 300
Coated Two
Sides
Gloss Transparency Clear 187 No Smooth
Coated Two
Sides
Coated Two
Sides
Coated Two
Sides
Gloss Plain White 250 No Smooth
Gloss Plain White 254 No Smooth
Gloss Plain White 254 No Smooth
X 170 170 Uncoated N/A Custom White 203 No Regular
X 170 170 Uncoated N/A Custom White 203 No Regular
007R96123 170 170 Uncoated N/A Custom White 203 No Regular
Static build up may affect media runnability and/or stacking.
Some side to side color difference may be seen if auto duplexing.
Some skew may be seen if auto duplexing.
Feed from a lower tray.
High static may impact inline finishing.
Static build up may affect media runnability and/or stacking.
Some side to side color difference may be seen if auto duplexing.
Some skew may be seen if auto duplexing.
Feed from a lower tray.
High static may impact inline finishing.
This media may have a mottled appearance due to poor paper formation (image density and gloss).
Stack quality and stack height may be affected due to media structure or high area coverage.
This media may have a mottled appearance due to paper formation (image density and gloss).
High area coverage with multilayer colors may be stressful on the fusing system.
High area coverage with multilayer colors may be stressful on the fusing system.
This is a generic starting point for this weight and type of media. Adjustments may need to be made to
This is a generic starting point for this weight and type of media. Adjustments may need to be made to
This is a generic starting point for this weight and type of media. Adjustments may need to be made to
Load Business Reply Envelopes perforated side up.
Static build up may affect media runnability and/or stacking.
For uniform image quality, do not image within 3 mm of label edges.
It is recommended that this media be run to stacker top tray.
It is recommended that this media be run to stacker top tray.
This media is adversely reactive in dry environments. This media is adversely reactive in wet environments.
Static build up may affect media runnability and/or stacking.
Load and stack 2
Simplex only recommended
Output to top tray only. 80 sheets.
Do not invert.
Simplex only recommended
Simplex only recommended
Output to top tray only. 80 sheets.
High static may impact inline finishing.
Simplex only recommended
Output to top tray only. 80 sheets.
High static may impact inline finishing.
ATA mode may help image quality.
High static may impact inline finishing.
achieve optimum transfer and or toner adhesion for individual media.
This media is adversely reactive in dry environments. This media is adversely reactive in wet environments.
Static build up may affect media runnability and/or stacking.
ATA mode may help image quality.
High static may impact inline finishing.
achieve optimum transfer and or toner adhesion for individual media.
This media is adversely reactive in dry environments. This media is adversely reactive in wet environments.
Static build up may affect media runnability and/or stacking.
ATA mode may help image quality.
High static may impact inline finishing.
achieve optimum transfer and or toner adhesion for individual media.
3 of 20 Revision Dec 2007
g
Xerox iGen3 90/100/110 Digital Production Press European CUSTOM Media List Jan 2008
The Xerox CUSTOM Media List contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.
Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.
Best Practices for Operation are outlined below.
Customers should validate the Best Practices for Operation are acceptable for their application.
*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*
When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.
CUSTOM media may be ordered through the Xerox Supply Account Manager.
Grammage
Weight (gsm)
Weight of the
paper in
rams
per square
meter
225 225
275 275
240 240
300 300
350 350
250 250
300 300
350 350
Coated One
Sides
Coated One
Sides
Coated Two
Sides
Coated Two
Sides
Coated Two
Sides
Coated One
Sides
Coated One
Sides
Coated One
Sides
Thickness
(microns)
CleanupCoating Type Sides Coated Sequence Color
Semi-Gloss Plain White 400 No Smooth
Semi-Gloss Plain White 500 No Smooth
Gloss Plain White 255 No Smooth
Gloss Plain White 330 No Smooth
Gloss Plain White 400 No Smooth
Gloss Plain White 305 No Smooth
Gloss Plain White 385 No Smooth
Gloss Plain White 455 No Smooth
Best Practices for Operation
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
Optimization of decurler settings may be needed for best stacking and runnability.
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
Optimization of decurler settings may be needed for best stacking and runnability.
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
Optimization of decurler settings may be needed for best stacking and runnability.
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
Optimization of decurler settings may be needed for best stacking and runnability.
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
Optimization of decurler settings may be needed for best stacking and runnability.
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
Optimization of decurler settings may be needed for best stacking and runnability.
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
Optimization of decurler settings may be needed for best stacking and runnability.
EIP mode may enhance image permanence on this media.
TAB may need to be cleaned prior to running media.
To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).
Optimization of decurler settings may be needed for best stacking and runnability.
Simplex only recommended
Feed from a lower tray only.
Output to top tray or bypass tray, if enabled.
Some skew may be seen.
Simplex only recommended
Feed from a lower tray only.
Output to top tray or bypass tray, if enabled.
Some skew may be seen.
Simplex only recommended
Feed from a lower tray only.
Output to top tray or bypass tray, if enabled.
Some skew may be seen.
Simplex only recommended
Feed from a lower tray only.
Output to top tray or bypass tray, if enabled.
Some skew may be seen.
Simplex only recommended
Feed from a lower tray only.
Output to top tray or bypass tray, if enabled.
Some skew may be seen.
Simplex only recommended
Feed from a lower tray only.
Output to top tray or bypass tray, if enabled.
Some skew may be seen.
Simplex only recommended
Feed from a lower tray only.
Output to top tray or bypass tray, if enabled.
Some skew may be seen.
Simplex only recommended
Feed from a lower tray only.
Output to top tray or bypass tray, if enabled.
Some skew may be seen.
It is imperative to utilize the bolded, abbreviated stock name for easy
migration to future enhancements to the stock library and media
Stock Library Name (Full Media Name)
management tools.
Packaging Grades
XeroxPBoardTambrite225
(Xerox Packaging Board Tambrite 225gsm)
XeroxPBoardTambrite275
(Xerox Packaging Board Tambrite 275 gsm)
XeroxPBoardEnsoGlos240
(Xerox Packaging Board EnsoGloss 240 gsm)
XeroxPBoardEnsoGlos300
(Xerox Packaging Board EnsoGloss 300 gsm)
XeroxPBoardEnsoGlos350
(Xerox Packaging Board EnsoGloss 350 gsm)
XeroxPBoardEnsoCoat250
(Xerox Packaging Board EnsoCoat 250 gsm C1S)
XeroxPBoardEnsoCoat300
(Xerox Packaging Board EnsoCoat 300 gsm C1S)
XeroxPBoardEnsoCoat350
(Xerox Packaging Board EnsoCoat 350 gsm C1S)
Base Size Tested
A4 A3 short grain SRA3 FinishTypeOther Size
007R96635
iGen3 Max Size
007R96634
007R96637
007R96636
iGen3 Xtra LargeSize
007R96638
iGen3 Max Size
007R96639
iGen3 Xtra LargeSize
007R96640
iGen3 Max Size
007R96641
iGen3 Xtra LargeSize
007R96642
iGen3 Max Size
007R96643
iGen3 Xtra LargeSize
007R96644
iGen3 Max
Size
007R96645
iGen3 Xtra LargeSize
007R96646
iGen3 Max Size
007R96647
iGen3 Xtra LargeSize
007R96648
iGen3 Max Size
007R96649
iGen3 Xtra LargeSize
007R96650
iGen3 Max Size
007R966351
iGen3 Xtra LargeSize
1 of 20 Revision March 2007
.
K
K
iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - Jan 2008
The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.
Green - Good test results, purchase a small quantity to insure expectations are met.
Yellow - Customer should validate the limitations are acceptable for their application.
Not Recommended
Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a
Product Description
Uncoated
Klippan Intensive
Promail Plus
Trophee
Igepa (perforated media)
Navigator
Multioffset
Color Copy 80
HVO
SVH Schmidt Paper
Rapport Matt Graphic Print
Navigator
IP Laser Duo
Copy speed
UBS offset IQ Smooth
ColorCopy 90
Bio Set
Clairefontaine
Schleipen Werkdruck
Alster Digital
Ballarpur Maplitho
Alabaster
Print Speed offset
4CC 100
Color Copy 100
DCP 100
Scandia 2000
Copy speed
PrintSpeed Offset
Select
Real Digital Smooth
Iprint
PrintSpeed Offset
Trophee
Natural Evolution White
Color Copy 120
PrintSpeed Offset
Igepa (perforated media)
4CC
Multioffset
Logic 700
Heavy weight Uncoated
Color Copy 160
particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.
2
Weight g/m
80 GSM Uncoated 315 x 440mm Full colour 3000 Yes Sep-07 Grainy prints, poor stacking, long runs will need service interventions in the fuser.
90 gsm Uncoated SRA3 Full Colour 8000 Yes Jul-07 90 gsm Uncoated SRA3 Travel Document 3000 Yes Jan-03
90 gsm Uncoated SRA3 Reports 2000 Yes Jan-06 Folded corners in stacker caused jams Xerox Colotech + 90 gsm
90 gsm Uncoated Several 10000 Yes Nov-02
90 gsm Uncoated
90 gsm Uncoated
90 gsm Uncoated
90 gsm Uncoated SRA3 Full Colour 3000 Yes Dec-06 90 gsm Uncoated SRA3 Full Colour 3000 Yes Dec-06 90 gsm Uncoated SRA3 Travel Document 3000 Yes Dec-06
100 gsm Uncoated Jan-02 Xerox Colotech + 100 gsm 100 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 100 gsm 100 gsm Uncoated A4 Forms 2500 Yes Sep-03 Xerox Colotech + 100 gsm
100 gsm Uncoated SRA3 1000 Yes Jun-04 100 gsm Uncoated SRA3 Travel Document 3000 Yes Jan-03 100 gsm Uncoated SRA3 Brochure 3000 Yes Jun-04
115 gsm Uncoated SRA3 Gov. Report 3000 Yes Feb-03 Xerox Colotech + 120 gsm 115 gsm Uncoated SRA3 Full Colour 3000 Yes Sep-06 Poor toner adhesion Xerox Colotech + 120 gsm
120 gsm Uncoated 320 x 460mm Full Colour 500 Yes Jul-07 Grainy Prints, Creasing. Small quantity tested, caution should be used when running this media 120 gsm Uncoated SRA3 Brochure 3000 Yes Dec-06
120 gsm Uncaoted 315 x 440mm Full colour 200 Yes Sep-07 Small quantity tested, caution should be used with this media. Xerox Colour Impressions 80 gsm 120 gsm Uncoated SRA3 Full Colour 3000 Yes Sep-06 Poor print qaulity of some colours Xerox Colotech + 120 gsm 120 gsm Uncoated A4 Full colour 3000 Yes Feb-02 Xerox Colotech + 120 gsm
135 gsm Uncoated SRA3 Brochure 3000 Yes Dec-06 130 gsm Uncaoted A3 Full colour 5000 Yes Jun-07
130 gsm Uncoated SRA3 Brochure 3000 Yes Jun-04 Xerox Colotech + 120 gsm 140 gsm Uncoated SRA3 reports 2000 Yes Aug-04 Xerox Colotech + 120 gsm 160 gsm Uncoated A4 Full colour 3000 Xerox Colotech + 160 gsm 160 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 160 gsm
Coating type Size Application
70 gsm Uncoated 330 x 560 mm Newspaper advert 6000 No May-05 80 gsm Uncaoted 315 x 440mm Full colour 200 Yes Sep-07 Small quantity tested, caution should be used with this media. Xerox Colour Impressions 80 gsm
80 gsm Uncaoted 315 x 440mm Full colour 200 Yes Sep-07 Small quantity tested, caution should be used with this media. Xerox Colour Impressions 80 gsm 80 gsm Uncaoted A3 Full colour 5000 Yes Jun-07 80 gsm Uncaoted 315 x 440mm Full colour 200 Yes Sep-07 Poor Print quality,High post fuser curl,poor stacking, contamination in fuser system Xerox Colour Impressions 80 gsm
80 gsm Uncoated SRA3 reports 2000 Yes Aug-04 Xerox Colotech + 120 gsm 80 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colour Impressions 80 gsm
80gsm Uncoated SRA3 Full colour 3000 Yes Jul-05 sheets creasing, poor stacking Xerox Colour Impressions 80 gsm 80 gsm Uncoated 521x364mm Full colour 2500 Yes Jun-05 Print Mottle evident. Low area coverage jobs only. Stacking not very good. Xerox Colour Impressions 80 gsm 90 gsm Uncaoted SRA3 Full colour 1000 Yes May-07 Grainy prints ,contamination in Fuser Xerox Colour Impressions 90gsm 90 gsm Uncaoted 315 x 440mm Full colour 200 Yes Sep-07 Poor Print quality,High post fuser curl,poor stacking, contamination in fuser system Xerox Colour Impressions 90 gsm
90 gsm Uncoated SRA3 reports 3000 Yes Nov-04 Xerox Colotech + 90 gsm
90 gsm Uncaoted 315 x 440mm Full colour 200 Yes Sep-07 Small quantity tested, caution should be used with this media. Xerox Colour Impressions 80 gsm
229x356mm 210x297mm 229x356mm 210x297mm 229x356mm 210x297mm
Number of sheets run
3000 Print quality is grainy and not suitable for high quality work. Xerox Colotech + 90 gsm
3000 Print quality is grainy and not suitable for high quality work. Xerox Colotech + 90 gsm
3000 Yes Dec-05 Print quality is grainy and not suitable for high quality work. Xerox Colotech + 90 gsm
Image
Quality
Image
Permanence
Not Recommended
Not Recommended
Not Recommended
Runnability
Auto
Duplex
Date of
test
Only to be used in simplex mode.Due to the very yellow colour of the paper printed colours may
look different. Top tray. Yellow dye migrates to fuser agent reservoir
Grainy, mottled prints,Folded corners,poor stacking,Build up of contamination in fuser is rapid
This media may have a mottled appearance due to poor paper formation (image density and
Print quality mottled and grainy.Contamination on the fuser roll and offsetting on prints after a Print quality mottled and grainy.Contamination on the fuser roll and offsetting on prints after a
Dries the fuser up quickly causing fuser roll contamination, leading to fuser offset and
Grainy, mottled prints,jams,Folded corners,poor stacking,Build up of contamination in fuser is
and service intervention is required regularly.
Contamination on the fuser roll and offsetting on prints after a short run Contamination on the fuser roll and offsetting on prints after a short run
short run POTENTIAL SERVICE RIS short run POTENTIAL SERVICE RIS
Contamination on the fuser roll and offsetting on prints after a short run
replacement. POTENTIAL SERVICE RISK
Contamination on the fuser roll and offsetting on prints after a short run Contamination on the fuser roll and offsetting on prints after a short run
Contamination on the fuser roll and offsetting on prints after a short run
Contamination on the fuser roll and offsetting on prints after a short run
rapid and service intervention is required regularly.
Notes
POTENTIAL SERVICE RISK POTENTIAL SERVICE RISK
Gloss).
POTENTIAL SERVICE RISK
POTENTIAL SERVICE RISK POTENTIAL SERVICE RISK
POTENTIAL SERVICE RISK
POTENTIAL SERVICE RISK
Xerox Guaranteed Media
Alternative
Xerox Colotech + 120 gsm
Xerox Colotech + 90 gsm Xerox Colotech + 90 gsm
Xerox Colotech + 90 gsm
Xerox Colotech + 100 gsm Xerox Colotech + 100 gsm Xerox Colotech + 100 gsm
Xerox Colotech + 100 gsm Xerox Colotech + 100 gsm Xerox Colotech + 100 gsm
Xerox Colotech + 100 gsm
Xerox Colotech + 100 gsm
2 of 20 Revision March 2007
iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - Jan 2008
The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.
Green - Good test results, purchase a small quantity to insure expectations are met.
Yellow - Customer should validate the limitations are acceptable for their application.
Not Recommended
Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a
Product Description
Color Copy 200 Color Copy 220
4CC 220 Trucard
PrintSpeed Offset
Color Copy 250
Xenabel
Color Copy 280
Crusade
ArcoPrint
Print Speed offset
Hedsorboard
Iprint
Print Speed offset
Replica Digital
Coated 1 side
Coated 2 side Matt
Take 2
Zanders CX900
Venicleux 1/s digital
Bindakote
Galerie image
Venicleux 1/s digital
Pre printed Christmas cards
Galerie image
Tambrite
Triplex Gris
Performa Cream
Neocart
Incad Exell
Neocart
Bindakote
Venicleux 1/s digital
Avanta Prima
Multicolor Mirabell
Neocart
Invercote G
Chromocard
Invercote
UPM Finesse
UPM Finnesse
G Print
Novatech Matt
UPM Finesse Bulky Matt
Novatech Matt
G Print
Novatech Matt
Arctic Matt
UPM Finesse Bulky Matt
Arctic Matt
Sattimatt
Silverblade Digital Matt
Silverblade Matt
Chorus Matt
Real Digital Matt
particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.
2
Weight g/m
200 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 200 gsm 220 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 220 gsm 220 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 220 gsm 240 gsm Uncoated SRA3 Full colour 3000 Yes Apr-05 Print mottle , especially in red Xerox Colotech + 280 gsm
250 gsm Uncoated SRA3 Brochure 3000 Yes Dec-06 250 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 250 gsm
250 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 250 gsm 280 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 280 gsm 285 gsm Uncoated SRA3 Business cards/greeting Cards 1000 No Jun-04 Stacking very poor in stacker, Simplex only. POTENTIAL SERVICE RISK Xerox Colotech + 280 gsm 300 gsm Uncoated 364 x 521 Greeting Card 3000 Yes Oct-03 Media used by customer Xerox Colotech + 300 gsm
300 gsm Uncoated SRA3 Travel Document 3000 Yes Dec-06 300 gsm Uncoated 364 x 521 Greeting Card 3000 Yes Oct-03 Media used by customer
340 gsm Uncoated 320 x 460mm Full Colour 500 Yes Jul-07 Grainy Prints. Small quantity tested, caution should be used when running this media 350 gsm Uncoated SRA3 Travel Document 3000 Yes Apr-05 350 gsm Uncoated SRA3 Full colour brochures 3000 Yes Oct-05 Xerox Colotech + 280 gsm 300 gsm Uncoated SRA3 Full Colour 3000 Yes Oct-07
80 gsm
170 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion 180 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion 195 gsm Coated 1 side 364 x 521 cover for Software manuals 2000 No Jul-03 Simplex only 210 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion 240 gsm Coated 1 side 190x 241 Christmas cards 4500 No Jun-05 Simplex only, Short Edge feed. 240 gsm Coated 1 side 364 x 521 cover for Software manuals 2000 No Jul-03 Simplex only
240 gsm/ 440
microns 250 gsm Coated 1 side 364 x 571 Packaging 3000 No Feb-05 250 gsm Coated 1 side A3 Packaging 400 Yes Dec-05 Small Test only. Xerox Pacakgig Board
250 gsm Coated 1 side 364 x 571 Packaging 3000 No Feb-05 Simplex only, Only to top tray or Bypass tray. Xerox Pacakgig Board 270 gsm Coated 1 side A3 Packaging 400 Yes Dec-05 Small Test only. Xerox Pacakgig Board
270 gsm / 450
250 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion Xerox Pacakgig Board 250 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion Xerox Pacakgig Board
275 gsm/ 450
microns 280 gsm Coated 1 side 364 x 500 mm Covers 3000 Yes Apr-07 Print mottle, Multifeeding. Xerox Pacakgig Board
290gsm Coated 1 side SRA3 Packaging 1000 Yes Oct-05 stiffness causes trail edge disturbances. Skewing of sheets causes misregistration Xerox Pacakgig Board 300 gsm Coated 1 side SRA3 Greeting cards, Packaging 1000 Yes Dec-05 Small Test only. Xerox Pacakgig Board 300 gsm Coated 1 side SRA3 Greeting cards, Packaging 1000 Yes Nov-05 Poor print Mottle, transfer issues Xerox Pacakgig Board
350 gsm Coated 1 side SRA3 Greeting cards, Packaging 1000 Yes Nov-05 Feeding and runability issues, transfer issues. Xerox Pacakgig Board 400 gsm Coated 1 side A3 Greeting cards, Packaging 400 Yes Dec-05 Small Test only. Xerox Pacakgig Board
90 gsm Coated 2 side Matt 364 x 521 Software manual 3000 Yes Jul-03 Cockle in Printed sheets 90 gsm Coated 2 side Matt 363 x 521 Software manual 2999 Yes Feb-05 jams in fuser, registration and stacker. Fuser roll contaminations, retacking of prints in fuser.
100 gsm Coated 2 side Matt SRA3 3000 Yes Jan-06 Print quality is poor in reds . Stacking is por with folded corners. Xerox Colotech + Coated silk 140 gsm 100 gsm Coated 2 side Matt 362 x 521 Software manual 2998 Yes May-03 Cockle in Printed sheets 100 gsm Coated 2 side Matt 364 x 521 Software manual 3000 Yes Mar-03 Cockle in Printed sheets Xerox Colotech + Coated silk 120 gsm 115 gsm Coated 2 side Matt 362 x 521 Software manual 2998 Yes Feb-05 Cockle in Printed sheets
115gsm Coated 2 side Matt SRA3 reports 3000 Yes Mar-03 Xerox Colotech + Coated silk 120 gsm 130 gsm Coated 2 side Matt SRA3 3000 Yes Jan-06 Print quality is poor in reds. Xerox Colotech + Coated silk 140 gsm 130 gsm Coated 2 side Matt SRA3 reports 3000 Yes Feb-05 Cleaning web becomes comtaminated quickly. Higher fuser oil usage. Xerox Colotech + Coated silk 140 gsm 130 gsm Coated 2 side Matt SRA3 Full Colour 600 Yes Apr-05 Only a small volume was tested. Xerox Colotech + Coated silk 130 gsm 130 gsm Coated 2 side Matt SRA3 Full Colour 2500 Yes Jul-07 Image mottle and poor stacking. Xerox Colotech + Coated silk 140 gsm 130 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-02 This media is adversely reactive in wet environment Xerox Colotech + Coated silk 140 gsm
135gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity,Poor Stacking, folded corners Xerox Colotech + Coated silk 140 gsm
135gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Sep-06 Higer jam rate Xerox Colotech + Coated silk 140 gsm
Coating type Size Application
Coated 1 side 320x445 wine bottle labels 500 No Jun-05 Simplex only. Avoid large areas of flat tint and high coverage.
Coated 1 side 364 x 571 Packaging 3000 No Feb-05 Simplex only, Only to top tray or Bypass tray. Xerox Pacakgig Board
micron
70 gsm Coated 2 Side Matt 364 x 521 book 1000 Yes Feb-05 jams in fuser, registration and stacker. Fuser roll contaminations, retacking of prints in fuser.
Coated 1 side 364 x 521 Pharmaceutical packaging 6000 No Jun-03 Simplex only Xerox Pacakgig Board
Coated 1 side 364 x 521 Pharmaceutical packaging 6000 No Jun-03 Simplex only Xerox Pacakgig Board
Number of sheets run
Image
Quality
Image
Permanence
Not Recommended Not Recommended
Not Recommended
Not Recommended
Not Recommended
Runnability
Auto
Duplex
Date of
test
Contamination on the fuser roll and offsetting on prints after a short run
Contamination on the fuser roll and offsetting on prints after a short run
Contamination on the fuser roll and offsetting on prints after a short run
Poor transfer , Poor satcking, jams. Prolonged use may result in fusre related service
Simplex only, Only to top tray or Bypass tray. Image mottle in Reds. Toner adhesion can be
Notes
POTENTIAL SERVICE RISK
POTENTIAL SERVICE RISK
POTENTIAL SERVICE RISK
intervention.
improved running in EIP mode
Xerox Guaranteed Media
Alternative
Xerox Colotech + 100 gsm
Xerox Colotech + 100 gsm
Xerox Colotech + 100 gsm
Xerox Pacakgig Board
3 of 20 Revision March 2007
iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - Jan 2008
The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.
Green - Good test results, purchase a small quantity to insure expectations are met.
Yellow - Customer should validate the limitations are acceptable for their application.
Not Recommended
Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a
Product Description
Arctic White Smooth
Novatech Matt
Silverblade Matt
Garda Matt
Chorus Matt
Silverblade Matt
Chorus Matt
Silverblade Matt
Zanders mega Matt
Zanders Mega Dull
Chorus Matt
Hello matt
Axelium
Silverblade Matt
Sati matt
Trucard duo
Zanders mega Matt
Zanders mega Matt
Garda Matt
Novatech Matt
Coated 2 side Silk/Satin
Trucard duo**
HannoArt silk*
Black label Satin
Condat Offset Silk
9 Lives
Black label Satin
Maxi Silk
LumiSilk
Lazulis( Condat Silk)
Voltage
Galarie Art Silk
Hello Silk
Black label Satin
Multi Art Silk
particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.
2
Weight g/m
135 gsm Coated 2 side Matt SRA3 reports 3000 Yes Mar-03 Xerox Colotech + Coated silk 140 gsm 150 gsm Coated 2 side Matt 362 x 521 Software manual 3000 Yes Feb-05 Cockle in Printed sheets Xerox Colotech + Coated Silk 170 gsm 150 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-02 Xerox Colotech + Coated Silk 170 gsm 170 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-06 Toner adhesion is marginal and EIP mode is advised. Fuser offseting may occur on long runs Xerox Colotech + Coated Silk 170 gsm 170 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-06 Very Poor toner adhesion. Would lead to comtamination in Fuser system Xerox Colotech + Coated Silk 170 gsm 170 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Apr-04 Oil streaks in print. Potential service risk Xerox Colotech + Coated Silk 170 gsm 200 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-06 Very Poor toner adhesion. Would lead to comtamination in Fuser system Xerox Colotech + Coated Silk 210 gsm 200 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-02 Xerox Colotech + Coated Silk 210 gsm 200 gsm Coated 2 side Matt SRA3 Yes Oct-04 Xerox Colotech + Coated Silk 210 gsm 216 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-04 Xerox Colotech + Coated Silk 210 gsm 250 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity, Poor toner adhesion,Poor Stacking, folded corners Xerox Colotech + Coated silk 250 gsm
250gsm Coated 2 side Matt A3 Gov. Report 2000 Yes Sep-07 Poor Toner sdhesion. Xerox Colotech + Coated silk 250 gsm
250gsm Coated 2 side Matt A3 Gov. Report 2000 Yes Sep-07 Poor Toner sdhesion. Xerox Colotech + Coated silk 250 gsm 250 gsm Coated 2 side Matt SRA3 Full Colour 1500 Yes Jul-07 Poor toner adhesion . Xerox Colotech + Coated Silk 250 gsm
250gsm Coated 2 side Matt SRA3 Gov. Report 3000 Yes Feb-03 Xerox Colotech + Coated silk 250 gsm 260 gsm Coated 2 side Matt SRA3 Greeting Cards/Business cards 3000 Yes Sep-04 Xerox Colotech + Coated silk 250 gsm
300gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss Xerox Colotech + Coated Silk 280 gsm
350gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss Xerox Colotech + Coated Silk 280 gsm 350 gsm Coated 2 side Matt SRA3 Full Colour 3000 Yes Jan-06 Toner adhesion is marginal and EIP mode is advised. Fuser offseting may occur on long runs Xerox Colotech + Coated Silk 170 gsm 350 gsm Coated 2 side Matt 362 x 521 Software manual 3000 Yes Feb-05 Cockle in Printed sheets Xerox Colotech + Coated Silk 280 gsm 400 gsm Coated 2 side Matt SRA3 Greeting Cards/Business cards 3000 Yes Sep-04
90 gssm Coated 2 side Satin SRA3 Full Colour 3000 Yes Feb-05 jams in fuser, registration and stacker. Fuser roll contaminations, retacking of prints in fuser.
100 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated silk 120 gsm 115 gsm Coated 2 side Satin SRA3 Full Colour 3000 Yes Sep-07 Recent information from customers is reliability issues and increase parts usage Xerox Colotech + Coated silk 120 gsm 115 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Sep-06 retacking of prints to fuser rolls with very heavy coverage Xerox Colotech + Coated silk 120 gsm 115 gsm Coated 2 side Silk 364 x 521 Software manual 3000 Yes Jul-03 Cockle in Printed sheets Xerox Colotech + Coated silk 120 gsm
135 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Jun-05 Print mottle and runability issues 130 gsm Coated 2 Side Satin SRA3 Booklet 3000 Yes May-04 Poor Fusing, POTENTIAL SERVICE RISK Xerox Colotech + Coated silk 140 gsm
130 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Oct-05 Print Mottle, Marginal Toner adhesion, high curl causing stacking issues. Wavey stack Xerox Colotech+ Coated silk 130 gsm 130 gsm Coated 2 side Silk SRA3 Brochure 3000 Yes Mar-04 Xerox Colotech+ Coated silk 130 gsm
150 gsm Coated 2 side Satin SRA3 Full Colour 3000 Yes Feb-05 150 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Small scale print mottle observed. Poor Stacking due to folded corners
Coating type Size Application
90 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Jan-02 Stack quality and Stack Height may be affected due to media structure or high area coverage
90 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Aug-05 Jams in Fuser, retacking of prints in fuser.
Number of sheets run
Image
Quality
Image
Permanence
Not Recommended
Not Recommended
Not Recommended
Not Recommended Not Recommended
Not Recommended
Not Recommended Not Recommended Not Recommended
Not Recommended
Runnability
Auto
Duplex
Date of
test
Feeding, registration, stacking problems. Needed EIP mode, Fuser damaged end of run.
Notes
POTENTIAL SERVICE RISK
Not Recommended
Xerox Guaranteed Media
Alternative
Xerox Colotech + Coated Silk 280 gsm
4 of 20 Revision March 2007
iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - Jan 2008
The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.
Green - Good test results, purchase a small quantity to insure expectations are met.
Yellow - Customer should validate the limitations are acceptable for their application.
Not Recommended
Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a
Product Description
Hello Silk
9 Lives
Symbol Free life
High Tech Silk
Lumi Silk
Hello Silk
Lazulis( Condat Silk)
9 Lives
Hello Silk
9 Lives
Voltage
Hello Silk
Claro Silk
Lazulis( Condat Silk)
9 Lives
Digital Green Coat velvet
High Tech Silk
Symbol Free life
UPM Digi Finesse Premium
Era Silk
High Tech Silk
Black label Satin
Coated 2 side Gloss
Soverign Silk
Hello Gloss
Black label Satin
Hello Gloss
Igepa profiGloss
Pionner Gloss
Core Gloss
4CC Art
Chorus Gloss
Lazulis( Condat Gloss)
Multi Art Gloss
Chorus Gloss
Silverblade digital Gloss
Leykam Gloss
Dtec V4
Chorus Gloss
Alterego
particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.
2
Weight g/m
150 gsm Coated 2 side Silk SRA3 Full Colour 30000 Yes Jan-02 150 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated silk 140 gsm
170 gsm Coated 2 Side Satin SRA3 Brochure 3000 Yes Mar-05 Xerox Colotech+ Coated silk 170 gsm 170 gsm Coated 2 Side Silk SRA3 Brochure 3000 Yes Nov-04 Xerox Colotech + Coated silk 170 gsm 170 gsm Coated 2 side Silk SRA3 Booklet 2000 Yes Aug-04 EIP mode may be needed for acceptable image permanence, POTENTIAL SERVICE RISK Xerox Colotech + Coated silk 170 gsm 170 gsm Coated 2 side Silk SRA3 Brochure 3000 Yes Mar-04 Xerox Colotech+ Coated silk 170 gsm
200 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Jun-05 Print mottle 200 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated silk 210 gsm
250 gsm Coated 2 side Silk SRA3 Brochure 3000 Yes Sep-06 No issues seen Xerox Colotech+ Coated silk 250 gsm 250 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated silk 250 gsm 260 gsm Coated 2 Side Satin SRA3 Brochure 3000 Yes May-04 Poor Fusing, POTENTIAL SERVICE RISK Xerox Colotech+ Coated silk 250 gsm 300 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Jan-02 EIP mode may be needed for acceptable image permanence Xerox Colotech+ Coated silk 350 gsm 300 gsm Coated 2 side Silk SRA3 Full Colour 2000 Yes Jun-07 Print Mottle, Print quality issues, Mulifeed jams.caution should be used with this media. Xerox Colotech+ Coated silk 350 gsm
300 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Jun-05 Print mottle seen in prints and may not meet customers expectations 300 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech+ Coated silk 350 gsm
300 gsm Coated 2 side velvet SRA3 Full Colour 3000 Yes Aug-04 Image mottle and stacker jams. Potential service risk Xerox Colotech+ Coated silk 350 gsm 300 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Jan-06 Xerox Colotech+ Coated silk 350 gsm 300 gsm Coated 2 Side Satin SRA3 Brochure 3000 Yes Jul-04 Xerox Colotech+ Coated silk 350 gsm 350 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Apr-07 Poor transfer,Poor Toner adhesion Xerox Colotech+ Coated silk 350 gsm 350 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Jan-06 Xerox Colotech+ Coated silk 350 gsm 350 gsm Coated 2 side Silk SRA3 Full Colour 3000 Yes Jan-06 Xerox Colotech+ Coated silk 350 gsm 350 gsm Coated 2 side Satin SRA3 Full Colour 3000 Yes May-05 Xerox Colotech+ Coated silk 350 gsm 400 gsm Coated 2 side Silk SRA3 Full Colour Brochure 3000 Yes Oct-05 Poor toner adhesion leading to fuser contamination Xerox Colotech+ Coated silk 350 gsm
100 gsm Coated 2 side Gloss SRA3 Car manual 3000 Yes Mar-04 Poor stripping from fuser with Heavy toner coverage. 115 gsm Coated 2 side Gloss SRA2 Brochure 3000 Yes Jun-04
115 gsn Coated 2 side Gloss SRA3 Booklets 3000 Yes Oct-04 Cockle in Printed sheets 130 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Jun-04 135 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity,Poor Stacking, folded corners Xerox Colotech + Coated silk 140 gsm
135 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jun-05 Print mottle and runability issues. Pages creasing . 150 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Small scale print mottle observed. Poor Stacking due to folded corners 170 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Very Poor toner adhesion. Would lead to comtamination in Fuser system
170 gsm Coated 2 side Gloss SRA3 Full colour 3000 Yes Jun-04 Oil streaks in print. Potential service risk 170 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use 170 gsm Coated 2 side Gloss SRA3 Full colour 3000 Yes Apr-05 Toner adhesion is marginal and EIP mode is advised
200 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Very Poor toner adhesion. Would lead to comtamination in Fuser system 200 gsm Coated 2 side Gloss SRA3 Full colour 3000 yes Jan-02
Coating type Size Application
80 gsm Coated 2 side Gloss A4 Medical Journal 2000 Yes Feb-03 90 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes May-05
90 gsm Coated 2 side Gloss A4 Medical Journal 2000 Yes Feb-03 Poor stripping from fuser, POTENTIAL SERVICE RISK
Number of sheets run
Image
Quality
Image
Permanence
Not Recommended Not Recommended
Not Recommended
Not Recommended
Not Recommended
Not Recommended
Runnability
Auto
Duplex
Date of
test
Notes
Marignal Toner adhesion
Very high jam rateNot Recommended
Marginal toner adhesion
No issues seen
Excessive Dust or contamination was observed in the machine after a short run; poor stripping
from fuser roll, POTENTIAL SERVICE RISK
Xerox Guaranteed Media
Alternative
Xerox Colotech+ Coated Gloss 120
gsm
Xerox Colotech+ Coated Gloss 120
gsm
Xerox Colotech+ Coated Gloss 120
gsm
Xerox Colotech+ Coated Gloss 130
gsm
Xerox Colotech + Coated Gloss 170
Xerox Colotech + Coated Gloss 170
gsm
Xerox Colotech+ Coated Gloss 210
gsm gsm
Xerox Colotech + Coated Gloss 210
gsm
5 of 20 Revision March 2007
g
s
iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - Jan 2008
The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.
Green - Good test results, purchase a small quantity to insure expectations are met.
Yellow - Customer should validate the limitations are acceptable for their application.
Not Recommended
Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a
Product Description
Lazulis( Condat Gloss)
Leykam Gloss
Zanders Mega Gloss
Ningbo
Chorus Gloss
Galarie Gloss
4CC Art
Lustralux
Pionner Gloss
Invercote Albato
Media Print Gloss
Sappi Voltage
Leykam Gloss
Lazulis( Condat Gloss)
Dtec V4
Splendorgel Ivory
Lumi Art
Novatech Gloss
Excelsior
High Tech Gloss
Zanders Mega Gloss
Zanders Mega Gloss
Trucard Duo Gloss
Black Label Gloss
High Tech Gloss
Ningbo
Lumi Digital Gloss
Leykam Gloss
particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.
2
Weight g/m
200 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jun-05 Print mottle present in prints, Poor toner adhesion, EIP mode may improve toner adhesion. 225 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use
216 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-04 250 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Dec-06 Jams frequently in stacker
250 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity, Poor toner adhesion,Poor Stacking, folded corners Xerox Colotech + Coated silk 250 gsm 250 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Print quality defects in a few sheets. 250 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Jun-04 Print quality defects in a few sheets. 260 gsm 250 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Jun-04 250 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Excessive jams, Transfer issues, poor toner adhesion 350 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Toner adhesion is marginal and EIP mode is advised. Fuser offseting may occur on long runs 260 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes May-04 Poor Fusing, POTENTIAL SERVICE RISK 300 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use 300 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jun-05 Print mottle present in prints, Poor toner adhesion, EIP mode may improve toner adhesion. 300 gsm Coated 2 side Gloss SRA3 Full colour 3000 Yes Apr-05 Print mottle in heavt red colours, Gloss variations
300 gsm Coated 2 side Gloss SRA3 Greeting Card 100 Yes Apr-03
300gsm Coated 2 side Gloss SRA3 Covers 3000 Poor fusing, POTENTIAL SERVICE RISK 300 gsm Coated 2 side Gloss 362 x 521 Software manual 3000 Yes May-05 Cockle in Printed sheets
300 gsm Coated 2 side Gloss SRA3 Greeting Card 100 Yes Apr-03
300 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor toner Adhesion
300gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss
350gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss 350 gsm Coated 2 side Gloss SRA3 Swing Tickets 3000 Yes Feb-05
350 gsm Coated 2 side Gloss 362 x 521 Software manual 3000 Yes May-05 Cockle in Printed sheets 350 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor toner Adhesion
350 gsm Coated 2 side Gloss SRA3 Full Colour 3000 Yes Dec-06 350 gsm Coated 2 side Gloss SRA3 Full Colour 5000 Yes Jan-06 Toner adhesion variable from side to side. EIP mode will improve toner adhesion 350 gsm Coated 2 side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use
Coating type Size Application
Coated 2 side High
Gloss
SRA3 Full Colour 200 Yes Jun-07
Number of sheets run
Image
Quality
Image
Permanence
Not Recommended
Not Recommended
Not Recommended
Not Recommended Not Recommended Not Recommended
Not Recommended Not Recommended
Not Recommended
Runnability
Auto
Duplex
Date of
test
Small quantity tested only, Poor Toner adhesion, caution should be used when running this
EIP mode may be needed for acceptable image permanence
Evaluation based on low volume test, POTENTIAL SERVICE RISK
EIP mode may be needed for acceptable image permanence
Evaluation based on low volume test, POTENTIAL SERVICE RISK
Print quality will show differential gloss.Jams frequently in stacker, Paper surface is soft and can
be easily damaged by handling and transport in Pres
Notes
media.
Jams in stacker in Auto Duplex mode
Jams in stacker in Auto Duplex mode
Xerox Guaranteed Media
Alternative
Xerox Colotech + Coated Gloss 210
gsm
Xerox Colotech+ Coated Gloss 210
gsm
Xerox Colotech+ Coated Gloss 250
gsm
Xerox Colotech+ Coated Gloss 250
gsm
Xerox Colotech+ Coated Gloss 250
gsm
Xerox Colotech+ Coated Gloss 250 Xerox Colotech+ Coated Gloss 250 Xerox Colotech+ Coated Gloss 280 Xerox Colotech+ Coated Gloss 250 Xerox Colotech+ Coated Gloss 250 Xerox Colotech+ Coated Gloss 210 Xerox Colotech + Coated Gloss 280
Xerox Colotech + Coated Gloss 280
Xerox Colotech+ Coated Gloss 280
Xerox Colotech+ Coated Gloss 280
Xerox Colotech+ Coated Gloss 280
Xerox Colotech + Coated Gloss 280 Xerox Colotech + Coated Gloss 280 Xerox Colotech + Coated Gloss 280
Xerox Colotech + Coated Gloss 280 Xerox Colotech+ Coated Gloss 280 Xerox Colotech + Coated Gloss 280 Xerox Colotech+ Coated Gloss 210
sm gsm gsm gsm gsm gsm gsm gsm
gsm
gsm
gsm
gsm gsm gsm
gsm gsm gsm gsm
6 of 20 Revision March 2007
t
t
r
r
iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - Jan 2008
The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.
Green - Good test results, purchase a small quantity to insure expectations are met.
Yellow - Customer should validate the limitations are acceptable for their application.
Not Recommended
Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a
Product Description
High Gloss coated one side Paper
Chromoulux 2Z (800)
Chromoulux 1Z (700)
Recycled Paper
Office Paper Multiline Eco Plus
Recycled Supreme
Biber Copy Novanta
Planojet
Revive Print
Ecoline Recycling
Revive Print
Cyclus
Revive Silk
Cyclus
Synthetic and speciality
Era Silk
Melinex(Dupont)
Robuskin White PET
Creation Star DWM 95 Micron
Melinex(Dupont)
Teslin
Polystyrene
Polystyrene
Polystyrene
PolyPropylene
PolyPropylene
Tyvek 4182
Durokote K075240
EVC PVC
Durokote 250
Artysyn 250
Artysyn 250
A PET
ICI mark resist
MDV PVC
MDV PVC
Lucchesi PVC
Credit Card PET
Credit Card PET
PR ZOO PVC-U
EVC PVC
particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.
2
Weight g/m
115 gsm Recycled SRA3 Gov. Report 2000 Yes Oct-04 Excessive jams during run 130 gsm Recycled Coated SRA3 3000 Yes Feb-07 Sheets are prone to crease and cause jams 300 gsm Recycled SRA3 Gov. Report 3000 Yes Sep-07 poor print quality,multifeeds,contamination. 350 gsm Recycled Coated SRA3 Full Colour 3000 Yes Mar-07 Poor Print quality and mottle , Toner Adhesion poor side to side.
200 microns PET A3 out door applications 100 No Oct-04 Poor Image quality, Poor fusing ,poor runability
50 microns PET SRA3 manuals for railway engineers 3000 Yes Feb-07 95 microns PET SRA3 Manuals 90 Yes Aug-05
125 microns PET A3 out door applications 100 No Oct-04 Poor Image quality, Poor fusing ,poor runability
163 gsm Polyolefin A3 Diplomas 1000 Yes Jul-04 Poor Image quality, Poor fusing ,poor runability Xerox DuraPaper X 250
300 microns Synthetic 360 x 520mm Full colour, Plant pot labels 1000 Yes Oct-05 Jams in Fuser causes material to melt and cause damage to fuser system 400 microns Synthetic SRA3 Plant Pot Labels 998 Yes Jul-04 Poor Image quality, Poor fusing ,poor runability 500 microns Synthetic SRA3 Plant Pot Labels 999 Yes Aug-04 Poor Image quality, Poor fusing ,poor runability
400 micron Synthetic SRA3 Plant Pot Labels 1000 Yes Sep-04 Poor Image quality, Poor fusing ,poor runability 500 micron Synthetic SRA3 Plant Pot Labels 1000 Yes Oct-04 Poor Image quality, Poor fusing ,poor runability
105 gsm Synthetic A3 manuals for Marine Vessels 100 No Nov-03 Wrinkle Xerox DuraPaper X 250 95 microns PET SRA3 Parts Manual/Catalogue 1000 Yes Jan-06 Image quality -large areas of flat tints are not recommended, as is heavy coverage Xerox Premium NeverTear 95 microns 200 micron PVC SRA3 Credit Card 3000 Yes Jul-05 Simplex only. Print to sample tray only.
250 microns PET A4 Plant Pot Labels 20 No Jan-04 250 microns Polyolefin A4 key tags 1000 No Apr-05 250 microns Polyolefin A3 key tags 1000 No Apr-05
350 microns PET SRA3 Full Colour 1000 Yes Sep-06 PET material caused fuser damage Xerox DuraPaper X 250 185 microns PET SRA3 Full Colour 1000 Yes Jun-05
250 micron PVC 350x500mm Full Colour 300 Yes Apr-07 350 micron PVC 350x500mm Full Colour 350 Yes Apr-07 Image quality poor on 2nd side, jams in feeders. This media will melt in fuser if there is a jam Xerox DuraPaper X 250 300 micron PVC 350x500mm Full Colour 300 No Jun-05 simplex only, top tray. Static may effect runability.This media will melt in fuser if there is a jam. Xerox DuraPaper X 250
449 microns PET G SRA3 Credit Card 50 No Feb-04
450 microns PET G SRA3 Credit Card 50 No Feb-04
400 microns PVC SRA3 Credit Card 3000 Yes Jun-05
400 micron PVC SRA3 Credit Card 2800 No Oct-07
Coating type Size Application
Coated 1 side high
250
gloss Coated 1 side high
250
gloss
80 gsm Recycled SRA3 Gov. Report 2000 Yes Oct-03 80 gsm Recycled SRA3 Gov. Report 2000 Yes May-03 80 gsm Recycled SRA3 Gov. Report 2000 Yes Sep-03 Print Deletion, POTENTIAL SERVICE RISK 80 gsm Recycled SRA3 Gov. Report 1000 Yes Sep-03 Cockle in Printed sheets
80 Recycled uncoated 315 x 440 Full Colour 200 Yes Sep-07
80 gsm Recycled SRA3 Gov. Report 1000 Yes Sep-03 Cockle in Printed sheets
100 Recycled uncoated 315 x 440 Full Colour 200 Yes Sep-07
315 x 440 Full Colour 200 Yes Sep-07 Very Poor Toner adhesion Xerox Colotech Supergloss 250 gsm 315 x 440 Full Colour 200 Yes Sep-07 Very Poor Toner adhesion Xerox Colotech Supergloss 250 gsm
Number of sheets run
Image
Quality
Image
Permanence
Not Recommended Not Recommended
Not Recommended Not Recommended
Not Recommended
Not Recommended Not Recommended Not Recommended
Not Recommended Not Recommended Not Recommended Not Recommended
Not Recommended
Not Recommended Not Recommended Not Recommended
Not Recommended
Not Recommended Not Recommended
Not Recommended Not Recommended
Runnability
Auto
Duplex
Date of
test
Not all colours reproduce well, Quantity tested was small and there fore caution is advised when
Not all colours reproduce well, Quantity tested was small and there fore caution is advised when
This media can only work with very low area coverage of toner. Coverage must be unifrom. Tha This media can only work with very low area coverage of toner. Coverage must be unifrom. Tha
EIP mode may be needed for acceptable image permanence
Transfer set to 120. Image quality -large areas of flat tints are not recommended, as is heavy
Excessive jams feeder and jams in fuser system will lead to sheets melting and causing
Poor feeding,Severe Contamination, Very poorStacking, very poor toner adhesion . This media
Simplex only. Print to sample tray only. Default transfre settings need adjusting to help
runnability.This media will melt in fuser if there is a jam
Notes
using this media.
using this media.
is no single area of high toner coverage is no single area of high toner coverage
Excessive jams during run Excessive jams during run Excessive jams during run
coverage
damage
Simplex only
Static may effect runnability
Media used by custome
Simplex only
Static may effect runnability
Media used by custome
should not be used.
Xerox Guaranteed Media
Alternative
Xerox Premium NeverTear 195
microns
Xerox Premium NeverTear 95 microns Xerox Premium NeverTear 95 microns
Xerox Premium NeverTear 120
microns
Xerox Premium NeverTear 270
microns
Xerox Premium NeverTear 350
microns
Xerox Premium NeverTear 350
microns
Xerox Premium NeverTear 350
microns
Xerox Premium NeverTear 350
microns
Xerox DuraPaper X 250 Xerox DuraPaper X 250 Xerox DuraPaper X 250
Xerox DuraPaper X 250 Xerox DuraPaper X 250
Xerox DuraPaper X 251
Xerox DuraPaper X 252
Xerox Premium NeverTear 350
microns
Xerox Premium NeverTear 350
microns
7 of 20 Revision March 2007
m
r
r
iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - Jan 2008
The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.
Green - Good test results, purchase a small quantity to insure expectations are met.
Yellow - Customer should validate the limitations are acceptable for their application.
Not Recommended
Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a
Product Description
Alkorprint
NoviTech (perforated Luggage Tag)
Luggage Tag
Envelope- Kraft
Envelope
Envelope- Kraft
Envelope
Curious Metalic
Zanders T2 2000
Simulator Translucent
Canson T2000 tracing paper
Idem Digital carbonless - CF Idem Digital carbonless - CB
Idem Digital carbonless - CFB
Idem Digital carbonless - CF Idem Digital carbonless - CB
Gloss Clear Polyester permanent label
Gloss White Polyester permanent label
Raflabrite 1 to view adhesive labels
Raflabrite 40 to view adhesive labels
Textured
Fedrigoni Marina Conchiglia
Fedrigoni Tintoretto Gesso 200 gsm
edrigoni Constellation Ivory E/E Raster 240 gs
Fedrigoni Constellation Snow E/E Raster
Fedrigoni Ivory E/E Tela 240 gsm
Terreus
Fedrigoni Constellation Snow E21 Silk
Sneeuww Gesat Sneeuww Gesat
Sneeuww Linnen ColourPlus Textured ColourPlus Textured
Consular Coated Sneeuww Gesat
Feltmark
Mellotex Regency embossed
Galerie image embossed
particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.
2
Weight g/m
320 microns PVC 320x450 mm Luggage Tag 3000 Yes Apr-05 Jams excessively . Print quality not suitanble for all print files Xerox DuraPaper X 250
145gsm
perforated
176 gsm
perforated
130 gsm
130 gsm
120 gsm Coated 2 side Gloss A3 Full colour 900 Yes Dec-06 Service risk due to contamination in fuser system
200gsm Tracing Paper A4 Full colour 500 No Sep-05 low opacity of the substrate causes misfeeds.
200 gsm Tracing Paper SRA3 Greeting Card 2 No Apr-03
180 gsm coated A4 Packaging labels 200 No Nov-05 180 gsm coated A4 Packaging labels 600 No Nov-05
175 gsm textured SRA3 Creative 200 Yes Aug-04 ATA need for Acceptable image transfer Xerox Textured 250 gsm 200 gsm textured SRA7 Creative 200 Yes Aug-04 ATA need for Acceptable image transfer Xerox Textured 250 gsm 240 gsm textured SRA5 Creative 200 Yes Aug-04 ATA need for Acceptable image transfer Xerox Textured 250 gsm 240 gsm textured SRA3 Business cards 3000 Yes Feb-03 ATA may be needed for acceptable transfer Xerox Textured 250 gsm
240gsm textured SRA6 Creative 200 Yes Aug-04 ATA need for Acceptable image transfer Xerox Textured 250 gsm
250 gsm textured SRA3 Greeting Cards 250 Yes Aug-04 280 gsm textured - 1 side SRA3 Business cards 3000 No Feb-03
200 gsm textured 315 x 440 Full colour 200 Yes Sep-07 small test only. Caution when using this media. Xerox Textured Linen 250 gsm 250 gsm textured 315 x 440 Full colour 200 Yes Sep-07 small test only. Caution when using this media. Xerox Textured Linen 250 gsm 250 gsm textured 315 x 440 Full colour 200 Yes Sep-07 small test only. Caution when using this media. Xerox Textured Linen 250 gsm 250 gsm textured - 1 side SRA3 Greeting Cards 3000 Yes Sep-06 Poor print quality and mottle Xerox Textured 250 gsm 270 gsm textured - 1 side SRA3 Greeting Cards 3000 Yes Sep-06 Poor print quality and mottle Xerox Textured 250 gsm
300 gsm textured 364 x 521 Greeting Card 3000 Yes Oct-03 300 gsm textured 315 x 440 Full colour 200 Yes Sep-07 small test only. Caution when using this media. Xerox Textured Linen 250 gsm
300 gsm textured SRA3 Greeting Card 3000 Yes Oct-06 Fuser contamination Xerox Textured 250 gsm 340 gsm Texured_2 side coated SRA3 Business cards 3000 No Mar-03 Jams in stacker in Auto Duplex mode Xerox Textured 250 gsm 235 gsm Textured SRA3 Full colour 3000 Yes Sep-07 Poor Image transfer, High curl, jams in stacker Xerox Textured 250 gsm
Coating type Size Application
composite material A3 Luggage Tag 5000 Yes Jun-07 composite material SRA3 Luggage Tag 2000 Yes Nov-02 Media used by customer Xerox DuraPaper X 250
Envelope (Sac) peel
and Stick
Envelope plain Peel
90 gsm
90 gsm
90 gsm Tracing Paper SRA3 Full colour 1000 No Jan-06 low opacity of the substrate causes misfeeds.
60 gsm Carbonless Paper CF A4 forms 200 Yes Sep-07 Poor toner adhesion, Jams and Sheets creasing 60 gsm Carbonless Paper CB A4 forms 200 Yes Sep-07 Poor toner adhesion, Jams and Sheets creasing
80 gsm Carbonless Paper CFB A4 forms 200 Yes Sep-07 Poor toner adhesion, Jams and Sheets creasing 80 gsm Carbonless Paper CF A4 forms 1000 Yes Jul-05 Poor toner adhesion, Jams and Sheets creasing
80 gsm Carbonless Paper CB A4 forms 1000 Yes Jul-05 Poor toner adhesion, Jams and Sheets creasing
and Stick
Envelope plain(pouch)
Peel and Stick
Envelope with window
Peel &Stick
Polyester A3 Labels 1000 No Oct-04 Polyester A4 Labels 1001 No Nov-04
229 x 324mm Envelope printing 20 No Feb-04
229 x 324mm Envelope printing 20 Feb-04
229 x 324mm Envelope printing 20 Feb-04
229 x 324mm Envelope printing 20 No Feb-04
Number of sheets run
Image
Quality
Image
Permanence
Not Recommended
Not Recommended
Not Recommended
Not Recommended
Not Recommended
Not Recommended Not Recommended
Not Recommended Not Recommended
Not Recommended Not Recommended Not Recommended
Not Recommended
Not Recommended
Runnability
Auto
Duplex
Date of
test
Multiple jams, high reactivity of paper,stacking poor , jams in stacker. Contaminated fuser web
Simplex only, Printed image should be within die cut edges. Image permanence can be Simplex only, Printed image should be within die cut edges. Image permanence can be
Simplex only.High curl in sheets post printing will cause stacking and post processing jams or
Simplex only. Print deletions around the die cuts.High curl in sheets post printing will cause
improved with EIP mode, POTENTIAL SERVICE RISK improved with EIP mode, POTENTIAL SERVICE RISK
stacking and post processing jams or issues
ATA may be needed for acceptable transfer
ATA may be needed for acceptable transfe
ATA may be needed for acceptable transfer
Notes
indicates possibel fis
Wrinkle
Excessive jams during run
Misfeeds
Wrinkle
Excessive jams during run
Misfeeds
Wrinkle
Excessive jams during run
Misfeeds
Wrinkle
Excessive jams during run
Misfeeds
Excessive jams during run
Misfeeds
issues
Jams in stacker in Auto Duplex mode
Media used by custome
Xerox Guaranteed Media
Alternative
Xerox DuraPaper X 250
Xerox Labels
Xerox labels
Xerox Textured 250 gsm Xerox Textured 250 gsm
Xerox Textured 250 gsm
Loading...