Xerox iGen3 90, iGen3 100, iGen3 110 Compatibility Manual

1 of 22 Revision Nov 2008

Instructions for programming media, including specific attributes, listed in this document but not yet in the Xerox iGen3 90/100/110 Digital
Production Press stock library can be found in the customer training manual or in the “Define New Stock” section of online help.

When using the Xerox DocuSP Controller, all stocks will be automatically connected to color profiles and calibration. To program a stock with
non-default settings, see the DocuSP 3.7 Customer Documentation or the On-Line Help on the DocuSP Color Server: On-Line Help/Color
Management/Using Color Profiles. When using a Creo DFE, color mapping is done using the Paper Stock Color.

Warranty Disclaimer

Xerox, The Document Company, the stylized X, and all Xerox names and product numbers mentioned in this publication are trademarks of Xerox Corporation. Other company trademarks are also acknowledged.

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or
manufacturer for any guarantees they may offer. When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure their expectations are met. The quality of Xerox supplies is
consistent from ream to ream and is backed by a 100% guarantee. The quality of non-Xerox branded paper may vary from ream to ream or carton to carton, so for optimum performance on Xerox color equipment, use only the best - Xerox
su

pp

lies. To learn more about the benefits of using Xerox Supplies, please contact your Supplies Representative.

2003 Xerox Cor

p

oration. All rights reserved.

This document will be updated regularly to reflect the most current media test results. Suggested machine adjustments as well as best
practices for operation are included where applicable in order to optimize media performance.

Xerox iGen3 90/100/110 Digital Production Press Europe Paper and Specialty Media Guide

April 2010

General Information
Media observations made in this publication are based on tests conducted using standard images with moderate to heavy image area
coverage. Test machines are maintained within specifications defined by user documentation.

For your convenience, this guide contains two lists. The Xerox Guaranteed Media List and the non-Xerox Tested Media List.

The Xerox Guaranteed Media List

contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110
Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed
and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure
that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are
tested and qualified by Xerox laboratories to guarantee consistent quality.

The Non-Xerox Tested Media List

contains non-Xerox branded paper and specialty media. Xerox tested many media products on the Xerox
iGen3 90/100/110 Digital Production Press and based on such testing have published this list of tested media products which may or may
not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and therefore no
determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

The Xerox Custom Media List

Contains custom media that has been tested on the Xerox iGen3 90/100/110 Digital Production Press for image
quality and performance. Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital
printing equipment. Customers should validate the Best Practices for Operation are acceptable for their application. When purchasing a
particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

1 of 22 Revision Nov 2008

Grammage

Weight (gsm)

XeroxColourImpress 80

(Xerox Colour Impressions 80 gsm)

003R97661 003R97662 80 Uncoated N/A Plain 0 White 91 Yes Regular This media may have a mottled appearance due to poor paper formation (ima ge density and gloss).

XeroxColotech+GLD90

(Xerox Colotech + Gold 90 gsm)

003R97988 003R97990 003R97991 90 Uncoated N/A Plain 0 White 101 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+GLD904HD

(Xerox Colotech + GOLD 90 gsm 4 Holed Drilled)

Yes 003R97989 90 Uncoated N/A Plain 0 White 101 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

XeroxColotech+ 90

(Xerox Colotech + 90 gsm)

003R94641 003R94642 003R95838 90 Uncoated N/A Plain 0 White 97 Yes Regular This media may have a mottled appearance due to poor paper forma tion (image density and gloss).

XeroxColotech+ 904HD

(Xerox Colotech + 90 gsm 4 Hole Drilled)

Yes 003R97673 90 Uncoated N/A Plain 0 White 97 Yes Regular

This media may have a mottled appearance due to poor paper formation (image density and gloss).

Stack quality and stack height may be affected due to media structure or high area coverage.

XeroxColourImpress 90

(Xerox Colour Impressions 90 gsm)

003R97663 003R97664 003R97665 90 Uncoated N/A Plain 0 White 98 Yes Regular This media may have a mottled appearance due to poor paper forma tion (image density and gloss).

XeroxColotech+GLD100

(Xerox Colotech + GOLD 100 gsm)

003R97993 003R97955 003R97956 100 Uncoated N/A Plain 0 White 110 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+GLD1004HD

(Xerox Colotech + Gold 100 gsm 4 Hole Drilled)

Yes 003R97954 100 Uncoated N/A Plain 0 White 110 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

XeroxColotech+ 100

(Xerox Colotech + 100 gsm)

003R94646 003R94647 003R95839

003R94648

(A3+)

(305 x 457mm)

100 Uncoated N/A Plain 0 White 110 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

XeroxColotech+ 1004HD

(Xerox Colotech + 100 gsm 4 Hole Drilled)

Yes 003R97674 100 Uncoated N/A Plain 0 White 110 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

XeroxColotech+ NW 100

(Xerox Colotech + Natural White 100 gsm)

003R97102 003R97103 003R97275 100 Uncoated N/A Plain 0 White 109 Yes Regular

XeroxColourImpress 100

(Xerox Colour Impressions 100 gsm)

003R97666 003R97667 003R97668 100 Uncoated N/A Plain 0 White 110 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed
and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

Uncoated Papers

A4 A3 SRA3

2 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxColotech+GLD120

(Xerox Colotech + GOLD 120 gsm)

003R97958 003R97959 003R97960

003R97961

(iGen3 Max Size)

(364 x 521mm)

120 Uncoated N/A Plain 0 White 125 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+ 120

(Xerox Colotech + 120 gsm)

003R94651 003R94652 003R95840

003R94653

(A3+)

(305 x 457mm)

120 Uncoated N/A Plain 0 White 129 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

XeroxColourImpress 120

(Xerox Colour Impressions 120 gsm)

003R98685 003R97669 003R97670 120 Uncoated N/A Plain 0 White 125 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+GLD160

(Xerox Colotech + GOLD 160 gsm)

003R97963 003R97964 003R97965 160 Uncoated N/A Plain 0 White 158 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColourImpress 160

(Xerox Colour Impressions 160 gsm)

003R98007 003R98008 003R98686 160 Uncoated N/A Plain 0 White 170 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+ 160

(Xerox Colotech + 160 gsm)

003R94656 003R94657 003R94658 003R95841 160 Uncoated N/A Plain 0 White 170 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

XeroxColotech+ NW 160

(Xerox Colotech + Natural White 160 gsm)

003R95956 003R95957 003R97276 160 Uncoated N/A Plain 0 White 157 Yes Regular

XeroxColotech+GLD200

(Xerox Colotech + GOLD 200 gsm)

003R97967 003R97968 003R97969 200 Uncoated N/A Plain 0 White 196 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+ 200

(Xerox Colotech + 200 gsm)

003R94661 003R94662 003R95842

003R94663

(A3+)

(305 x 457mm)

200 Uncoated N/A Plain 0 White 216 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

XeroxColotech+ NW 200

(Xerox Colotech + Natural White 200 gsm)

003R95958 003R95959 003R97277 200 Uncoated N/A Plain 0 White 207 Yes Regular

XeroxColotech+GLD220

(Xerox Colotech + GOLD 220 gsm)

003R97971 003R97972 003R97973 220 Uncoated N/A Plain 0 White 215 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+ 220

(Xerox Colotech + 220 gsm)

003R94668 003R94669 003R95843

003R94670

(A3+)

(305 x 457mm)

220 Uncoated N/A Plain 0 White 239 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

XeroxColotech+GLD250

(Xerox Colotech + GOLD 250 gsm)

003R97975 003R97976 003R97977 250 Uncoated N/A Plain 0 White 245 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

3 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxColotech+ 250

(Xerox Colotech + 250 gsm)

003R94671 003R94672 003R95844

003R94673

(A3+)

(305 x 457mm)

250 Uncoated N/A Plain 0 White 249 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

4 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxColourImpress 250

(Xerox Colour Impressions 250 gsm)

003R98687 003R97671 003R97672 250 Uncoated N/A Plain 0 White 250 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+GLD280

(Xerox Colotech + GOLD 280 gsm)

003R97979 003R97980 003R97981 280 Uncoated N/A Plain 0 White 270 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+ 280

(Xerox Colotech + 280 gsm)

003R97097 003R97098 003R97099

003R97660

(iGen3 Max Size)

(364 x 521mm)

280 Uncoated N/A Plain 0 White 291 Yes Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

XeroxColotech+GLD300

(Xerox Colotech + GOLD 300 gsm)

003R97983 003R97984 003R97985

003R97986

(iGen3 Max Size)

(364 x 521mm)

300 Uncoated N/A Plain 0 White 300 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+GLD350

(Xerox Colotech + GOLD 350 gsm)

003R98625

003R98626

(iGen3 Max Size)

(364 x 521mm)

350 Uncoated N/A Plain 0 White 350 Yes Regular This media may have a mottled appearance due to poor paper formation (image density and gloss).

XeroxColotech+ G 120

(Xerox Colotech + Gloss Coated 120 gsm)

003R97574 003R97575 003R97576 120

Coated Two

Sides

Gloss Plain 0 White 96 Yes Smooth

XeroxColotech+ S 120

(Xerox Colotech + Silk Coated 120 gsm)

003R97592 003R97593 003R97594 120

Coated Two

Sides

Semi-gloss Plain 0 White 115 Yes Smooth

XeroxColourImpresG120

(Xerox Colour Impressions Gloss 120 gsm)

003R97886 003R97887

003R97888

(iGen3 Max Size)

(364 x 521mm)

120

Coated Two

Sides

Gloss Plain 0 White 96 Yes Smooth

XeroxColotech+ G 140

(Xerox Colotech + Gloss Coated 140 gsm)

003R97577 003R97578 003R97579 140

Coated Two

Sides

Gloss Plain 0 White 118 Yes Smooth

XeroxColotech+ S 140

(Xerox Colotech + Silk Coated 140 gsm)

003R97595 003R97596 003R97597 140

Coated Two

Sides

Semi-gloss Plain 0 White 135 Yes Smooth

XeroxColotech+ G 170

(Xerox Colotech + Gloss Coated 170 gsm)

003R97580 003R97581 003R97582 170

Coated Two

Sides

Gloss Plain 0 White 144 Yes Smooth

XeroxColotech+ S 170

(Xerox Colotech + Silk Coated 170 gsm)

003R97598 003R97599 003R97600 170

Coated Two

Sides

Semi-gloss Plain 0 White 164 Yes Smooth

Coated Two Side C2S

Coated Two Side Heavy C2S

5 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxColotech+ G 210

(Xerox Colotech + Gloss Coated 210 gsm)

003R97583 003R97584 003R97585

003R11326

(iGen3 Max Size)

(364 x 521mm)

210

Coated Two

Sides

Gloss Plain 0 White 181 Yes Smooth

6 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxColotech+ S 210

(Xerox Colotech + Silk Coated 210 gsm)

003R97601 003R97602 003R97603

003R11350

(iGen3 Max Size)

(364 x 521mm)

210

Coated Two

Sides

Semi-gloss Plain 0 White 203 Yes Smooth

XeroxColourImpresG210

(Xerox Colour Impressions Gloss 210 gsm)

003R97889 003R97890

003R97891

(iGen3 Max Size)

(364 x 521mm)

210

Coated Two

Sides

Gloss Plain 0 White 183 Yes Smooth

XeroxColotech+ G 250

(Xerox Colotech + Gloss Coated 250 gsm)

003R97586 003R97587 003R97588 250

Coated Two

Sides

Gloss Plain 0 White 212 Yes Smooth

XeroxColotech+ S 250

(Xerox Colotech + Silk Coated 250 gsm)

003R97604 003R97605 003R97606 250

Coated Two

Sides

Semi-gloss Plain 0 White 242 Yes Smooth

XeroxColotech+ G 280

(Xerox Colotech + Gloss Coated 280 gsm)

003R97589 003R97590 003R97591

003R11327

(iGen3 Max Size)

(364 x 521mm)

280

Coated Two

Sides

Gloss Plain 0 White 249 Yes Smooth

XeroxColotech+ S 280

(Xerox Colotech+ Silk Coated 280 gsm)

003R97607 003R97608 003R97609

003R11351

(iGen3 Max Size)

(364 x 521mm)

280

Coated Two

Sides

Semi-gloss Plain 0 White 272 Yes Smooth

XeroxColotech+ G 350

(Xerox Colotech + Gloss Coated 350 gsm)

003R98701 350

Coated Two

Sides

Gloss Plain 0 White 309 Yes Smooth

XeroxColotech+ S 350

(Xerox Colotech+ Silk Coated 350 gsm)

003R98700 350

Coated Two

Sides

Gloss Plain 0 White 312 Yes Smooth

Specialties- Labels

XeroxLabelHSLL 1up

(Xerox High Speed Laser Labels 1 up)

003R96169 140 Uncoated N/A Plain 0 White 164 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

XeroxLabelHSLL 8up

(Xerox High Speed Laser Labels 8 up)

003R96283 140 Uncoated N/A Plain 0 White 164 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

XeroxLabelHSLL 10up

(Xerox High Speed Laser Labels 10 up)

003R96284 140 Uncoated N/A Plain 0 White 164 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

XeroxLabelHSLL 16up

(Xerox High Speed Laser Labels 16 up)

003R96281 140 Uncoated N/A Plain 0 White 164 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

XeroxLabelHSLL 24up

(Xerox High Speed Laser Labels 24 up)

003R96282 140 Uncoated N/A Plain 0 White 164 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

7 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxLabelWRC 1up

(Xerox Labels White with Rounded Corners 1 up)

003R91225 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

8 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxLabelWRC 2up

(Xerox Labels White with Rounded Corners 2 up)

003R97525 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

XeroxLabelWRC 6up

(Xerox Labels White with Rounded Corners 6 up)

003R96288 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

XeroxLabelWRC 8up

(Xerox Labels White with Rounded Corners 8 up)

003R91224 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelWRC 14up

(Xerox Labels White with Rounded Corners 14 up)

003R96289 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelWRC 15up

(Xerox Labels White with Rounded Corners 15 up)

003R97259 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelWRC 16up

(Xerox Labels White with Rounded Corners 16 up)

003R96296 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelWRC 18up

(Xerox Labels White with Rounded Corners 18 up)

003R96297 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelWRC 21up

(Xerox Labels White with Rounded Corners 21 up)

003R96298 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelWRC 24up

(Xerox Labels White with Rounded Corners 24 up)

003R97526 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelWRC 65up

(Xerox Labels White with Rounded Corners 65 up)

003R93177 140 Uncoated N/A Plain 0 White 146 No Smooth

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelCL 1up

(Xerox Colour Laser Labels 1 up)

003R93872 160 Uncoated N/A Plain 0 White 165 No Regular

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

XeroxLabelCL 4up

(Xerox Colour Laser Labels 4 up)

003R95813 160 Uncoated N/A Plain 0 White 165 No Regular

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

XeroxLabelCL 6up

(Xerox Colour Laser Labels 6 up)

003R93873 160 Uncoated N/A Plain 0 White 165 No Regular

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

9 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxLabelCL 8up

(Xerox Colour Laser Labels 8 up)

003R93874 160 Uncoated N/A Plain 0 White 165 No Regular

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelCL 14up

(Xerox Colour Laser Labels 14 up)

003R93875 160 Uncoated N/A Plain 0 White 165 No Regular

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

10 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxLabelCL 21up

(Xerox Colour Laser Labels 21 up)

003R95815 160 Uncoated N/A Plain 0 White 165 No Regular

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelCL 24up

(Xerox Colour Laser Labels 24 up)

003R97524 160 Uncoated N/A Plain 0 White 165 No Regular

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Short Edge Feed recommended.

XeroxLabelCL CD

(Xerox Colour Laser Labels CD 2 up)

003R97514 160 Uncoated N/A Plain 0 White 165 No Regular

Simplex only recommended.

Imaging over die cuts or label edges may adversely affect fuser roll life.

Specialties- Dividers

XeroxColotechTab R5B W

(Xerox Colotech + Tabs 5 bank reverse collated white dividers)

003R97231

(A4+)

(223 x 297mm)

200 Uncoated N/A Precut Tab 5 White 216 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the
latest Customer Maintenance Manual Section 3.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and
Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
For best performance, do not image within 2 mm of tab edge.
May need to use jogger for uniform stacking.

XeroxColotechTab R10B W

(Xerox Colotech + Tabs 10 bank reverse collated white dividers)

003R97232

(A4+)

(223 x 297mm)

200 Uncoated N/A Precut Tab 10 White 216 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the
latest Customer Maintenance Manual Section 3.
Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and
Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.
For best performance, do not image within 2 mm of tab edge.
May need to use jogger for uniform stacking.

Xerox Dividers S6B W

(Xerox Dividers Straight Collated 6 Bank White)

003R91013

(A4+)

(223 x 297mm)

160 Uncoated N/A Full Cut Tab 6 White 170 No Regular For best performance, do not image within 2 mm of tab edge.

XeroxDividers R10B R

(Xerox Dividers Reverse Collated 10 Bank Rainbow)

003R93988

(A4+)

(223 x 297mm)

160 Uncoated N/A Full Cut Tab 10 White 170 No Regular May need to use jogger for uniform stacking.

XeroxDividers R10B W

(Xerox Dividers Reverse Collated 10 Bank White)

003R91001

(A4+)

(223 x 297mm)

160 Uncoated N/A Full Cut Tab 10 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

XeroxDividers R12B R

(Xerox Dividers Reverse Collated 12 Bank Rainbow)

003R93987

(A4+)

(223 x 297mm)

160 Uncoated N/A Full Cut Tab 12 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

XeroxDividers R12B W

(Xerox Dividers Reverse Collated 12 Bank White)

003R91002

(A4+)

(223 x 297mm)

160 Uncoated N/A Full Cut Tab 12 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

XeroxDividers R3B W

(Xerox Dividers Reverse Collated 3 Bank White)

003R90871

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 3 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

XeroxDividers R4B W

(Xerox Dividers Reverse Collated 4 Bank White)

003R90872

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 4 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

11 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxDividers R5B R

(Xerox Dividers Reverse Collated 5 Bank Rainbow)

003R90878

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 5 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

XeroxDividers R5B W

(Xerox Dividers Reverse Collated 5 Bank White)

003R90873

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 5 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

12 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxDividers R6B R

(Xerox Dividers Reverse Collated 6 Bank Rainbow)

003R93992

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 6 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

XeroxDividers R6B W

(Xerox Dividers Reverse Collated 6 Bank White)

003R91000

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 6 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

XeroxDividers R8B R

(Xerox Dividers Reverse Collated 8 Bank Rainbow)

003R93990

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 8 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

May need to use jogger for uniform

XeroxDividers S10B R

(Xerox Dividers Straight Collated 10 Bank Rainbow)

003R91390

(A4+)

(223 x 297mm)

160 Uncoated N/A Full Cut Tab 10 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxDividers S10B W

(Xerox Dividers Sraight Collated 10 Bank White)

003R91014

(A4+)

(223 x 297mm)

160 Uncoated N/A Full Cut Tab 10 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxDividers S12B W

(Xerox Dividers Straight Collated 12 Bank White)

003R91015

(A4+)

(223 x 297mm)

160 Uncoated N/A Full Cut Tab 12 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxDividers S5B W

(Xerox Dividers Straight Collated 5 Bank White)

003R91012

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 5 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

XeroxDividers S6B W

(Xerox Dividers Straight Collated 6 Bank White)

003R91013

(A4+)

(223 x 297mm)

160 Uncoated N/A Precut Tab 6 White 170 No Regular

Please check with your service representative before running. Specific feeder hardware, Tag 016F TAB Media Kit and

Tag 134T RIM 9" Firmware, (included in 1.5 machine configuration) is necessary to run tabs or dividers.

Specialties- Cards

XeroxDocuCard 1up

(Xerox DocuCard 1 up)

003R97571

(500 sheet box)

200 Uncoated N/A Plain 0 White 209 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

For uniform image quality do not image within 5 mm of card edge.

Load and stack 50-100 sheets maximum due to media structure.

TAB may need to be cleaned prior to running media.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

For feedin

g

without a DocuCard Enabler Kit feed tray load max is 50-100 sheets. Load card inboard for Long Edge Feed

and trail edge for Short Edge Feed.

XeroxValuPeel U 1up

(Xerox ValuPeelCard Uncoated 1 up)

003R97952 X 216 Uncoated N/A Plain 0 White 194 No Regular

For uniform image quality do not image within 5 mm of card edge.

Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

XeroxValuPerf U 1up

(Xerox ValuPerfCard Uncoated 1up)

003R97690 X 216 Uncoated N/A Plain 0 White 194 No Regular

For uniform image quality do not image within 5 mm of card edge.

Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

13 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxValuPeel C 1up

(Xerox Value Peel Card Coated 1 up)

003R97953 X 216 Coated One Side Gloss Plain 0 White 170 No Smooth

For uniform image quality do not image within 5 mm of card edge.

Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

TAB may need to be cleaned prior to running media.

XeroxValuPerf C 1up

(Xerox ValuPerfCard Coated 1up)

003R97677 X 216 Coated One Side Gloss Plain 0 White 170 No Smooth

For uniform image quality do not image within 5 mm of card edge.

Load and stack 50-100 sheets maximum due to media structure.

It is recommended to not image on back if laminated.

14 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxDocuGlossC 1up

(Xerox DocuGloss Card 1up)

003R97678 163 Uncoated N/A Plain 0 White 170 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

Stack quality and stack height may be affected due to media structure or high area coverage.

For uniform image quality do not image within 5 mm of card edge.

Load and stack 50-100 sheets maximum due to media structure.

TAB may need to be cleaned prior to running media.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

For feeding without a DocuCard Enabler Kit feed tray load max is 50-100 sheets.

XeroxDC BusCards

(Xerox Digital Color Special Advanced Media Business Cards)

003R97512 195 Uncoated N/A Plain 0 White 226 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

For uniform image quality, do not image within 3 mm of card edges (side 1) or within 7 mm of tape edges (side 2).

Stack quality and stack height may be affected due to media structure or high area coverage.

XeroxDocuMag C

(Xerox DocuMagnet Coated)

003R96071 280

C1S (Coated

One Side)

Gloss Plain 0 White 194 No Smooth

Simplex only recommended

For uniform image quality do not image within 5 mm of card edge.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

XeroxDocuMag U

(Xerox DocuMagnet Uncoated)

003R96072 280

C1S (Coated

One Side)

Matte Plain 0 White 170 No Regular

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the

latest Customer Maintenance Manual Section 3.

Simplex only recommended

For uniform image quality do not image within 5 mm of card edge.

A DocuCard Enabler Kit is available to facilitate feeding and stacking of greater volumes.

Specialties- Synthetic Films

XeroxPremiumNeverTear95

(Xerox Premium NeverTear 95 micron)

No 003R98056 003R98057 003R98031 003R98032 125

Coated Two

Sides

Gloss Plain 0 White 95 Yes Smooth Static build up may affect media runnability and/or stacking.

XeroxPremiumNeverTear120

(Xerox Premium Never Tear 120 micron)

No 003R98058 003R98059 003R98035 003R98036 155

Coated Two

Sides

Gloss Plain 0 White 120 Yes Smooth Static build up may affect media runnability and/or stacking.

XeroxDuraPaper X250

(Xerox DuraPapaer X250)

003R97513 200 Uncoated N/A Plain 0 White 255 No Regular

If image permanence adjustment is required, refer to ADJ 1-Pressure Roll Contact Arc Adjustment procedure in the

latest Customer Maintenance Manual.

Specialties- Other

Xerox UltraMagnet

(Xerox Ultra Magnet)

003R98060 350 Coated One Side Gloss Plain White 194 No Smooth

Simplex only recommended
It is recommended that this media be run to stacker top tray.
Static build up may affect media runnability and/or stacking.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

To enable running Service must set NVM 6876 (LE Late tat TAR sensor Jam Offset) to maximum value.

Output to top tray or bypass tray, if enabled.

Lead edge to Trail edge skew.

For best print quality print 15 mm from edges of the sheet.

XeroxTransferPaper

(Xerox One Step Transfer Paper)

003R97949 003R97951 118 Coated One Side Gloss Custom 0 White 143 No Smooth

Simplex only recommended
Static build up may affect media runnability and/or stacking.

XeroxLasWinGraphiX C

(Xerox Laser Window GraphiX Clear)

003R97494 003R98675 003R98676 003R98677 200 Coated One Side Gloss Transparency Clear 114 No Smooth

For uniform image quality, do not image within 3 mm of die cut on back of decal.

Simplex only recommended
Static build up may affect media runnability and/or stacking.

XeroxLasWinGraphiX O

(Xerox Laser Window GraphiX Opaque)

003R97511 003R97539 003R98678 003R98679 200 Coated One Side Gloss Transparency Clear 114 No Smooth

For uniform image quality, do not image within 3 mm of die cut on back of decal.

Simplex only recommended
Static build up may affect media runnability and/or stacking.

15 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

XeroxPBTrans

(Xerox Universal Paper Backed Transparency)

003R98199 200 Coated One Side Gloss Transparency Clear 187 No Smooth

This media may have a mottled appearance due to paper formation (image density and gloss).

Stack quality and stack height may be affected due to media structure or high area coverage.

Simplex only recommended
Static build up may affect media runnability and/or stacking.

Deliver to stacker FACE DOWN to avoid stacking issues.

XeroxTransWh 150 gsm

(Xerox Translucent White 150 gsm)

007R96576 150

Coated Two

Sides

Matte Plain White 160 No Smooth

XeroxDocuPac M

(Xerox DocuPac Folders Matte)

003R97353 180

Coated Two

Sides

Matte Custom 0 White 223 No Smooth For uniform image quality, do not image within 10 mm of raised score or 2 mm of dimpled score

16 of 22 Revision Nov 2008

Grammage

Weight (gsm)

The Xerox Guaranteed Media List contains Xerox paper and specialty media that has been extensively tested on the Xerox iGen3 90/100/110 Digital Production Press for image quality and performance. All Xerox paper and specialty media on this list are digitally optimized, designed

and manufactured for optimal performance in Xerox digital printing equipment. Our extensive testing and stringent specifications ensure that we are able to guarantee the performance and consistency of Xerox paper and specialty media. Xerox paper and specialty media are tested

and qualified by Xerox laboratories to guarantee consistent quality.

iGen3 Digital Production Press Guaranteed Media List - Europe - April 2010

Best Practices for Operation

Weight of the

paper in grams

per square meter

Sides Coated Coating Type Type Sequence Color

Thickness
(microns)

Cleanup FinishOther Size

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for
easy migration to future enhancements to the stock library and

media management tools.

Standard cut sizes

Drilled

A4 A3 SRA3

Specialties- Carbonless

XeroxCarb2SWP

(Xerox Carbonless, 2 part, Straight PreCollated, White and Pink)

003R99107 80 Uncoated N/A Ordered 2 White 110 Yes Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb2SWY

(Xerox Carbonless, 2 part, Straight PreCollated, White and Yellow)

003R99105 80 Uncoated N/A Ordered 2 White 110 Yes Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb3RPYW

(Xerox Carbonless, 3 part, Reverse PreCollated, Pink, Yelllow and

White)

003R99109 80 Uncoated N/A Ordered 3 White 110 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb3SWYP

(Xerox Carbonless, 3 Part, Straight PreCollated, White, Yellow and

Pink)

003R99108 80 Uncoated N/A Ordered 3 White 110 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb4RGPYW

(Xerox Carbonless, 4 part, Reverse PreCollated, Green, Pink, Yellow

and White)

003R99112 80 Uncoated N/A Ordered 4 White 110 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarb4SWYPB

(Xerox Carbonless, 4 part, Straight PreCollated, White, Yellow,Pink

and Blue)

003R99111 80 Uncoated N/A Ordered 4 White 110 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

Reverse PreCollated product run face up to stacker is recommended.

XeroxCarbCBSingleW

(Xerox Carbonless, Coated Back, Singles, White)

003R99069 80 Uncoated N/A Plain White 110 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFBSingleW

(Xerox Carbonless, Coated Front and Back, Singles, White)

003R99070 80 Uncoated N/A Plain White 110 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFBSingleY

(Xerox Carbonless, Coated Front and Back, Singles , Yellow)

003R99071 80 Uncoated N/A Plain Yellow 112 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFSingleP

(Xerox Carbonless, Coated Front, Single, Pink)

003R99077 80 Uncoated N/A Plain Pink 107 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFSingleW

(Xerox Carbonless, Coated Front, Singles, White)

003R99075 80 Uncoated N/A Plain White 110 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

XeroxCarbCFsingleY

(Xerox Carbonless, Coated Front, Singles, Yellow)

003R99076 80 Uncoated N/A Plain Yellow 112 No Regular

This media may have a mottled appearance due to paper formation (image density and gloss).

Optimization of decurler settings may be needed for best stacking and runnability.

Fuser Fluid II is recommended for duplex applications.

1 of 20 Revision Nov 2008

Grammage

Weight (gsm)

Uncoated

XX

60 Uncoated N/A Plain White 86 No Regular

Stack quality and stack height may be affected due to media structure or high area coverage.

Simplex only recommended

High area coverage with multilayer colors may be stressful on the fusing system.

Recycled Uncoated

003R98801 003R98802

90 Uncoated N/A Plain White 90 No Regular

Due to the nature of the raw material used, print output can be more wavy than virgin fibre paper and some sheets may have inclusions which

may affect print quality.

003R98804 003R98805

100 Uncoated N/A Plain White 100 No Regular

Due to the nature of the raw material, print output can be more wavy than virgin fibre paper and some sheets may have inclusions which may

affect print quality.

003R98807 003R98808

120 Uncoated N/A Plain White 120 No Regular

Due to the nature of the raw material, print output can be more wavy than virgin fibre paper and some sheets may have inclusions which may

affect print quality.

Textured Uncoated

007R96574 250 250 Uncoated N/A Plain White 310 No Rough

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer

Maintenance Manual Section 3.

For additional image quality tips please contact the media hotline.

ATA mode may help image quality.

This is a

g

eneric starting point for this weight and type of media. Adjustments may need to be made to achieve optimum transfer and or toner

adhesion for individual media.

007R96572 250 250 Uncoated N/A Plain White 330 No Rough

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer

Maintenance Manual Section 3.

For additional image quality tips please contact the media hotline.

ATA mode may help image quality.

This is a

g

eneric starting point for this weight and type of media. Adjustments may need to be made to achieve optimum transfer and or toner

adhesion for individual media.

003R97691 250 250 Uncoated N/A Plain White 300 No Rough

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer

Maintenance Manual Section 3.

For additional image quality tips please contact the media hotline.

ATA mode may help image quality.

This is a

g

eneric starting point for this weight and type of media. Adjustments may need to be made to achieve optimum transfer and or toner

adhesion for individual media.

007R96573 250 250 Uncoated N/A Plain White 300 No Rough

If Transfer set point adjustments are required for snow defects, refer to the Snow Sample Artifact Procedure in the latest Customer

Maintenance Manual Section 3.

For additional image quality tips please contact the media hotline.

ATA mode may help image quality.

This is a

g

eneric starting point for this weight and type of media. Adjustments may need to be made to achieve optimum transfer and or toner

adhesion for individual media.

003R98041 003R98042 003R98043 003R98044 260

Coated Two

Sides

Gloss Plain White 195 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

003R98045 003R98046 003R98047 003R98048 300

Coated Two

Sides

Gloss Plain White 270 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

003R98049 003R98050 003R98051 003R98052 350

Coated Two

Sides

Gloss Plain White 350 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

XeroxXmail60

(Xerox Xmail 60 gsm)

XeroxLineEmbossed250

(Xerox line Embossed 250 gsm)

Other Size

Weight of the

paper in grams

per square meter

XeroxColotechRecycled90

(Xerox Colotech Recycled 90 gsm)

XeroxColotechRecycled100

(Xerox Colotech Recycled 100 gsm)

XeroxColotechRecycled120

(Xerox Colotech Recycled 120 gsm)

iGen3 Digital Production Press Custom Media List - Europe - April 2010

The Xerox CUSTOM Media List

contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.

Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.

Best Practices for Operation are outlined below.

Customers should validate the Best Practices for Operation are acceptable for their application.

*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*

When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

CUSTOM media may be ordered through the Xerox Supply Account Manager.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Base Size Tested

Best Practices for Operation

A4 A3 short grain SRA3 FinishType

Synthetics

CleanupCoating Type Sides Coated Sequence Color

Thickness
(microns)

XeroxLinenEmbossed250

(Xerox Embossed Linen 250 gsm)

XeroxTextileEmboss250

(Xerox Textile Embossed 250 gsm)

XeroxHammerEmboss250

(Xerox Hammer Embossed 250 gsm)

XeroxPremNeverTear195

(Xerox Premium NeverTear 195 micron)

XeroxPremNeverTear270

(Xerox Premium Never Tear 270 gsm)

XeroxPremNeverTear350

(Xerox Premium NeverTear 350 gsm)

2 of 20 Revision Nov 2008

Grammage

Weight (gsm)

Other Size

Weight of the

paper in grams

per square meter

iGen3 Digital Production Press Custom Media List - Europe - April 2010

The Xerox CUSTOM Media List

contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.

Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.

Best Practices for Operation are outlined below.

Customers should validate the Best Practices for Operation are acceptable for their application.

*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*

When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

CUSTOM media may be ordered through the Xerox Supply Account Manager.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Base Size Tested

Best Practices for Operation

A4 A3 short grain SRA3 FinishType CleanupCoating Type Sides Coated Sequence Color

Thickness
(microns)

003R98037 003R98038 003R98039 003R98040 195

Coated Two

Sides

Gloss Plain White 145 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

XXXX200200Coated Two Sides Gloss Plain White 130 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

XXXX200200Coated Two Sides Gloss Plain White 130 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

XXXX200200Coated Two Sides Gloss Plain White 130 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

XXXX200200Coated Two Sides Gloss Plain White 130 No Smooth

Static build up may affect media runnability and/or stacking.

Some side to side color difference may be seen if auto duplexing.

Some skew may be seen if auto duplexing.

Feed from a lower tray.

High static may impact inline finishing.

X 150 Uncoated N/A Plain 0 White 160 No Regular

This media may have a mottled appearance due to poor paper formation (image density and gloss).

Stack quality and stack height may be affected due to media structure or high area coverage.

Load Business Reply Envelopes perforated side up.

Load and stack 2

003R98201 200

Coated Two

Sides

Gloss Transparency Clear 187 No Smooth

This media may have a mottled appearance due to paper formation (image density and gloss).

Simplex only recommended

Static build up may affect media runnability and/or stacking.

Output to top tray only. 80 sheets.

Do not invert.

003R97344 003R98645 003R98688 200 200

Coated Two

Sides

Gloss Plain White 250 No Smooth

For uniform image quality, do not image within 3 mm of label edges.

Simplex only recommended

003R97244 003R97347 300 300

Coated Two

Sides

Gloss Plain White 254 No Smooth

Simplex only recommended

It is recommended that this media be run to stacker top tray.

Output to top tray only. 80 sheets.

High static may impact inline finishing.

High area coverage with multilayer colors may be stressful on the fusing system.

003R97245 003R97348 300 300

Coated Two

Sides

Gloss Plain White 254 No Smooth

Simplex only recommended

It is recommended that this media be run to stacker top tray.

Output to top tray only. 80 sheets.

High static may impact inline finishing.

High area coverage with multilayer colors may be stressful on the fusing system.

XeroxBRE 1up

(Xerox Business Reply Envelopes 1 up)

XeroxPNeverTearBlue130

(Xerox Premium NeverTear Blue 130 microns)

XeroxPNeverTearGrn130

(Xerox Premium NeverTear Green 130 microns)

XeroxPNeverTearPink130

(Xerox Premium NeverTear Pink 130 microns)

XeroxPNeverTearYell130

(Xerox Premium NeverTear Yellow 130 micron)

XeroxDuraPaperLabel

(Xerox DuraPaper label)

Specialties

XeroxPremNeverTear145

(Xerox Premium NeverTear 145 microns)

XeroxCrysClearLabel

(Xerox Crystal Clear Self Adhesive Label)

XeroxGlossWhiteLabel

(Xerox Glossy white Self Adhesive Label)

XeroxPBtrans SRA3

(Xerox Universal Paper Backed Transparency SRA3)

3 of 20 Revision Nov 2008

Grammage

Weight (gsm)

Other Size

Weight of the

paper in grams

per square meter

iGen3 Digital Production Press Custom Media List - Europe - April 2010

The Xerox CUSTOM Media List

contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.

Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.

Best Practices for Operation are outlined below.

Customers should validate the Best Practices for Operation are acceptable for their application.

*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*

When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

CUSTOM media may be ordered through the Xerox Supply Account Manager.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Base Size Tested

Best Practices for Operation

A4 A3 short grain SRA3 FinishType CleanupCoating Type Sides Coated Sequence Color

Thickness
(microns)

X 170 170 Uncoated N/A Custom White 203 No Regular

This media is adversely reactive in dry environments.

This media is adversely reactive in wet environments.

Static build up may affect media runnability and/or stacking.

ATA mode may help image quality.

High static may impact inline finishing.

This is a generic starting point for this weight and type of media. Adjustments may need to be made to achieve

optimum transfer and or toner adhesion for individual media.

X 170 170 Uncoated N/A Custom White 203 No Regular

This media is adversely reactive in dry environments.

This media is adversely reactive in wet environments.

Static build up may affect media runnability and/or stacking.

ATA mode may help image quality.

High static may impact inline finishing.

This is a generic starting point for this weight and type of media. Adjustments may need to be made to achieve

optimum transfer and or toner adhesion for individual media.

007R96123 170 170 Uncoated N/A Custom White 203 No Regular

This media is adversely reactive in dry environments.

This media is adversely reactive in wet environments.

Static build up may affect media runnability and/or stacking.

ATA mode may help image quality.

High static may impact inline finishing.

This is a generic starting point for this weight and type of media. Adjustments may need to be made to achieve

optimum transfer and or toner adhesion for individual media.

XeroxDuraDocPap504950PE

(Xerox DuraDocument Paper 504950PE)

XeroxDuraDocPap703670PE

(Xerox DuraDocument Paper 703670PE)

XeroxDuraDocPap503650PT

(Xerox DuraDocument Paper 503650PT)

4 of 20 Revision Nov 2008

Grammage

Weight (gsm)

Other Size

Weight of the

paper in grams

per square meter

iGen3 Digital Production Press Custom Media List - Europe - April 2010

The Xerox CUSTOM Media List

contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.

Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.

Best Practices for Operation are outlined below.

Customers should validate the Best Practices for Operation are acceptable for their application.

*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*

When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

CUSTOM media may be ordered through the Xerox Supply Account Manager.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Base Size Tested

Best Practices for Operation

A4 A3 short grain SRA3 FinishType CleanupCoating Type Sides Coated Sequence Color

Thickness
(microns)

007R96634

007R96635

iGen3

Max Size

007R96636 iGen3

Xtra LargeSize

225 225

Coated One

Sides

Semi-Gloss Plain White 400 No Smooth

Simplex only recommended

EIP mode may enhance image permanence on this media.

TAB may need to be cleaned prior to running media.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

Output to top tray or bypass tray, if enabled.

Optimization of decurler settings may be needed for best stacking and runnability.

Some skew may be seen.

007R96637

007R96638

iGen3

Max Size

007R96639 iGen3

Xtra LargeSize

275 275

Coated One

Sides

Semi-Gloss Plain White 500 No Smooth

Simplex only recommended

EIP mode may enhance image permanence on this media.

TAB may need to be cleaned prior to running media.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

Output to top tray or bypass tray, if enabled.

Optimization of decurler settings may be needed for best stacking and runnability.

Some skew may be seen.

007R96640

iGen3

Max Size

007R96641 iGen3

Xtra LargeSize

240 240

Coated Two

Sides

Gloss Plain White 255 No Smooth

Simplex only recommended

EIP mode may enhance image permanence on this media.

TAB may need to be cleaned prior to running media.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

Output to top tray or bypass tray, if enabled.

Optimization of decurler settings may be needed for best stacking and runnability.

Some skew may be seen.

007R96642

iGen3

Max Size

007R96643 iGen3

Xtra LargeSize

300 300

Coated Two

Sides

Gloss Plain White 330 No Smooth

Simplex only recommended

EIP mode may enhance image permanence on this media.

TAB may need to be cleaned prior to running media.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

Output to top tray or bypass tray, if enabled.

Optimization of decurler settings may be needed for best stacking and runnability.

Some skew may be seen.

007R96644

iGen3 Max Size

007R96645
iGen3 Xtra

LargeSize

350 350

Coated Two

Sides

Gloss Plain White 400 No Smooth

Simplex only recommended

EIP mode may enhance image permanence on this media.

TAB may need to be cleaned prior to running media.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

Output to top tray or bypass tray, if enabled.

Optimization of decurler settings may be needed for best stacking and runnability.

Some skew may be seen.

007R96646

iGen3

Max Size

007R96647 iGen3

Xtra LargeSize

250 250

Coated One

Sides

Gloss Plain White 305 No Smooth

Simplex only recommended

EIP mode may enhance image permanence on this media.

TAB may need to be cleaned prior to running media.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

Output to top tray or bypass tray, if enabled.

Optimization of decurler settings may be needed for best stacking and runnability.

Some skew may be seen.

007R96648

iGen3

Max Size

007R96649 iGen3

Xtra LargeSize

300 300

Coated One

Sides

Gloss Plain White 385 No Smooth

Simplex only recommended

EIP mode may enhance image permanence on this media.

TAB may need to be cleaned prior to running media.

Feed from a lower tray only.

Output to top tray or bypass tray, if enabled.

Optimization of decurler settings may be needed for best stacking and runnability.

Some skew may be seen.

Packaging Grades

XeroxPBoardTambrite225

(Xerox Packaging Board Tambrite 225gsm)

XeroxPBoardTambrite275

(Xerox Packaging Board Tambrite 275 gsm)

XeroxPBoardEnsoGlos240

(Xerox Packaging Board EnsoGloss 240 gsm)

XeroxPBoardEnsoGlos300

(Xerox Packaging Board EnsoGloss 300 gsm)

XeroxPBoardEnsoCoat250

(Xerox Packaging Board EnsoCoat 250 gsm C1S)

XeroxPBoardEnsoCoat300

(Xerox Packaging Board EnsoCoat 300 gsm C1S)

XeroxPBoardEnsoGlos350

(Xerox Packaging Board EnsoGloss 350 gsm)

5 of 20 Revision Nov 2008

Grammage

Weight (gsm)

Other Size

Weight of the

paper in grams

per square meter

iGen3 Digital Production Press Custom Media List - Europe - April 2010

The Xerox CUSTOM Media List

contains custom media that has been tested on the Xerox iGen3 100/110 Digital Production Press for image quality and performance.

Custom media on this list are digitally optimized, designed and manufactured for performance in Xerox digital printing equipment.

Best Practices for Operation are outlined below.

Customers should validate the Best Practices for Operation are acceptable for their application.

*Any alterations to the product's basic design, including sheet size, must be tested and approved by the Xerox Media & Compatibles Technology Center.*

When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that expectations are met.

CUSTOM media may be ordered through the Xerox Supply Account Manager.

Stock Library Name (Full Media Name)

It is imperative to utilize the bolded, abbreviated stock name for easy

migration to future enhancements to the stock library and media

management tools.

Base Size Tested

Best Practices for Operation

A4 A3 short grain SRA3 FinishType CleanupCoating Type Sides Coated Sequence Color

Thickness
(microns)

007R96650 iGen3

Max Size

007R966351

iGen3 Xtra LargeSize

350 350

Coated One

Sides

Gloss Plain White 455 No Smooth

Simplex only recommended

EIP mode may enhance image permanence on this media.

TAB may need to be cleaned prior to running media.

Feed from a lower tray only.

To enable running toggle NVM 12509 (Lower Tray Multifeed Detected FLTByp).

Output to top tray or bypass tray, if enabled.

Optimization of decurler settings may be needed for best stacking and runnability.

Some skew may be seen.

XeroxPBoardEnsoCoat350

(Xerox Packaging Board EnsoCoat 350 gsm C1S)

1 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

Uncoated

Klippan Intensive

70 gsm Uncoated 330 x 560 mm Newspaper advert 6000 No May-05

Only to be used in simplex mode.Due to the very yellow colour of the paper printed colours may look
different. Top tray. Yellow dye migrates to fuser agent reservoir.

Xerox Colotech + 120 gsm

Promail Plus 80 gsm Uncoated 315 x 440mm Full colour 200 Yes Sep-07 Small quantity tested, caution should be used with this media. Xerox Colour Impressions 80 gsm
Trophee 80 gsm Uncoated 315 x 440mm Full colour 200 Yes Sep-07 Small quantity tested, caution should be used with this media. Xerox Colour Impressions 80 gsm

Igepa (perforated media)

80 gsm Uncoated A3 Full colour 5000 Yes Jun-07

Grainy, mottled prints,Folded corners,poor stacking,Build up of contamination in fuser is rapid and
service intervention is required regularly.

Navigator 80 gsm Uncoated 315 x 440mm Full colour 200 Yes Sep-07 Poor Print quality,High post fuser curl,poor stacking, contamination in fuser system Xerox Colour Impressions 80 gsm

MaxiPreprint

80 gsm Uncoated SRA3 Full colour 3000 Yes Dec-08 Poor toner transfer on 2nd side, marginal toner adhesion, contamination on fuser system. Service risk Xerox Colour Impressions 80 gsm

Multioffset 80 gsm Uncoated SRA3 reports 2000 Yes Aug-04 Xerox Colotech + 120 gsm

Druco Pre -perforated

80 gsm Uncoated 319 x 489 Full colour 3000 Yes Feb-08

Graphic and high area coverage files may look grainy. Regular cleaning of the fuser system will be
required.

Xerox Colotech + 90gsm

Color Copy 80 80 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colour Impressions 80 gsm
HVO 80 GSM Uncoated 315 x 440mm Full colour 3000 Yes Sep-07 Grainy prints, poor stacking, long runs will need service interventions in the fuser.
SVH Schmidt Paper 80gsm Uncoated SRA3 Full colour 3000 Yes Jul-05 sheets creasing, poor stacking Xerox Colour Impressions 80 gsm
Rapport Matt 80 gsm Uncoated 521x364mm Full colour 2500 Yes Jun-05 Print Mottle evident. Low area coverage jobs only. Stacking not very good. Xerox Colour Impressions 80 gsm
Graphic Print 90 gsm Uncoated SRA3 Full colour 1000 Yes May-07 Grainy prints ,contamination in Fuser Xerox Colour Impressions 90gsm

Navigator 90 gsm Uncoated 315 x 440mm Full colour 200 Yes Sep-07 Poor Print quality,High post fuser curl,poor stacking, contamination in fuser system Xerox Colour Impressions 90 gsm

Koehler

90 gsm Uncoated 320 x 460mm Full colour 3000 Yes Jul-08

Print quality marginal under default settings, contamination build up on fuser system requires regular
maintenance

Xerox Colour Impressions 90 gsm

Arctic Volume

90 gsm Uncoated 360 x 500mm Full colour 3000 Yes Mar-09

Print quality marginal under default settings, contamination build up on fuser system requires regular
maintenance

Xerox Colour Impressions 90 gsm

IP Laser Duo

90 gsm Uncoated SRA3 Full colour 8000 Yes Jul-07

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 90 gsm

Copy speed

90 gsm Uncoated SRA3 Travel Document 3000 Yes Jan-03

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 90 gsm

UBS offset 90 gsm Uncoated SRA3 Reports 2000 Yes Jan-06 Folded corners in stacker caused jams Xerox Colotech + 90 gsm
IQ Smooth 90 gsm Uncoated SRA3 reports 3000 Yes Nov-04 Xerox Colotech + 90 gsm
ColorCopy 90

90 gsm Uncoated Several 10000 Yes Nov-02 This media may have a mottled appearance due to poor paper formation (image density and Gloss). Xerox Colotech + 90 gsm

Bio Set 90 gsm Uncoated 315 x 440mm Full colour 200 Yes Sep-07 Small quantity tested, caution should be used with this media. Xerox Colour Impressions 80 gsm
Clairefontaine 90 gsm Uncoated

229x362

3000 Yes Jul-08 Print quality is grainy and not suitable for high quality work. Xerox Colotech + 90 gsm

Schleipen Werkdruck

90 gsm Uncoated

229x356mm
210x297mm

3000 Yes Dec-05 Print quality is grainy and not suitable for high quality work. Xerox Colotech + 90 gsm

Chamois Alster Digital 90 gsm Uncoated

229x362

3000 Yes Jul-08 Contamination on the fuser roll system. Potential service risk. Xerox Colotech + 90 gsm

Ballarpur Maplitho

90 gsm Uncoated SRA3 Full Colour 3000 Yes Dec-06

Print quality mottled and grainy.Contamination on the fuser roll and offsetting on prints after a
short run POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

Alabaster

90 gsm Uncoated SRA3 Full Colour 3000 Yes Dec-06

Print quality mottled and grainy.Contamination on the fuser roll and offsetting on prints after a
short run POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

Print Speed offset

90 gsm Uncoated SRA3 Travel Document 3000 Yes Dec-06

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

4CC 100 100 gsm Uncoated Jan-02 Xerox Colotech + 100 gsm
Color Copy 100 100 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 100 gsm
DCP 100 (4hole punched) 100 gsm Uncoated A4 Forms 2500 Yes May-08 Xerox Colotech + 100 gsm
DCP 100 (3hole punched) 100 gsm Uncoated A4 Forms 2500 Yes May-08 Xerox Colotech + 100 gsm
DCP 100 (2hole punched) 100 gsm Uncoated A4 Forms 2500 Yes May-08 Xerox Colotech + 100 gsm

Scandia 2000

100 gsm Uncoated SRA3 1000 Yes Jun-04

Dries the fuser up quickly causing fuser roll contamination, leading to fuser offset and replacement.
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

Copy speed

100 gsm Uncoated SRA3 Travel Document 3000 Yes Jan-03

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

PrintSpeed Offset

100 gsm Uncoated SRA3 Brochure 3000 Yes Jun-04

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

Take2 Offset 100 gsm Uncoated SRA3 Brochure 3000 Yes Nov-08 Poor Image quality, poor runability, contamination on fuser rolls. Xerox Colotech + 100 gsm
Select 115 gsm Uncoated SRA3 Gov. Report 3000 Yes Feb-03 Xerox Colotech + 120 gsm
Real Digital Smooth 115 gsm Uncoated SRA3 Full Colour 3000 Yes Sep-06 Poor toner adhesion Xerox Colotech + 120 gsm

Iprint

120 gsm Uncoated 320 x 460mm Full Colour 500 Yes Jul-07 Grainy Prints, Creasing. Small quantity tested, caution should be used when running this media

PrintSpeed Offset

120 gsm Uncoated SRA3 Brochure 3000 Yes Dec-06

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

Trophee 120 gsm Uncoated 315 x 440mm Full colour 200 Yes Sep-07 Small quantity tested, caution should be used with this media. Xerox Colour Impressions 80 gsm
Natural Evolution White 120 gsm Uncoated SRA3 Full Colour 3000 Yes Sep-06 Poor print qaulity of some colours Xerox Colotech + 120 gsm
Color Copy 120 120 gsm Uncoated A4 Full colour 3000 Yes Feb-02 Xerox Colotech + 120 gsm

Not Recommended

Not Recommended

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Not Recommended

2 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

PrintSpeed Offset

135 gsm Uncoated SRA3 Brochure 3000 Yes Dec-06

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

Igepa (perforated media)

130 gsm Uncoated A3 Full colour 5000 Yes Jun-07

Grainy, mottled prints,jams,Folded corners,poor stacking,Build up of contamination in fuser is rapid
and service intervention is required regularly.

4CC 130 gsm Uncoated SRA3 Brochure 3000 Yes Jun-04 Xerox Colotech + 120 gsm
Multioffset 140 gsm Uncoated SRA3 reports 2000 Yes Aug-04 Xerox Colotech + 120 gsm
Take2 Offset 160 gsm Uncoated SRA3 Full colour 500 Yes Mar-09 Small test, grainy prints. Xerox Colotech + 100 gsm
Logic 700 160 gsm Uncoated A4 Full colour 3000 Xerox Colotech + 160 gsm
Color Copy 160 160 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 160 gsm
Heavy weight Uncoated
Edixion Offset 170 gsm Uncoated 364 x 521 Full colour 3000 Yes Mar-09 Print quality grainy, especially black. Registration issues with large sheets, Xerox Colotech + 160 gsm

Target Digital Offset

190 gsm Uncoated SRA3 Full colour 3000 Yes Nov-08

Grainy IQ. Poor transfer in 3 colour black, Build up of toner on fuser web and contamination of lower
external heat roll

Xerox Colotech + 200 gsm

Color Copy 200 200 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 200 gsm
Color Copy 220 220 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 220 gsm
4CC 220 220 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 220 gsm
Trucard 240 gsm Uncoated SRA3 Full colour 3000 Yes Apr-05 Print mottle , especially in red Xerox Colotech + 280 gsm

PrintSpeed Offset

250 gsm Uncoated SRA3 Brochure 3000 Yes Dec-06

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

On offset 250 gsm Uncoated SRA3 Full colour 3000 Yes Nov-08 Build up of contamination on fuser system. Multifeeding should be expected.Service risk Xerox Colotech + 250 gsm
Color Copy 250 250 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 250 gsm
Xenabel 250 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 250 gsm
Color Copy 280 280 gsm Uncoated A4 Full colour 3000 Yes Jan-02 Xerox Colotech + 280 gsm
Crusade 285 gsm Uncoated SRA3 Business cards/greeting Cards 1000 No Jun-04 Stacking very poor in stacker, Simplex only. POTENTIAL SERVICE RISK Xerox Colotech + 280 gsm
ArcoPrint 300 gsm Uncoated 364 x 521 Greeting Card 3000 Yes Oct-03 Media used by customer Xerox Colotech + 300 gsm

Print Speed offset

300 gsm Uncoated SRA3 Travel Document 3000 Yes Dec-06

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

Hedsorboard 300 gsm Uncoated 364 x 521 Greeting Card 3000 Yes Oct-03 Media used by customer

Take 2

300 gsm Uncoated SRA3 Full Colour 3000 Yes Oct-07 Poor transfer , Poor satcking, jams. Prolonged use may result in fusre related service intervention.

Iprint 340 gsm Uncoated 320 x 460mm Full Colour 500 Yes Jul-07 Grainy Prints. Small quantity tested, caution should be used when running this media

Koehler ice white 340 gsm 340 gsm Uncoated 320 x 460mm Full Colour 3000 Yes Jul-08 Print quality marginal using default settings.

Take2 Offset

350 gsm Uncoated SRA3 Full colour 500 Yes Mar-09 Small test. Mottle, grainy prints, generally poor print quality, misfeeding and multifeeding jams Xerox Colotech + 350 gsm

Print Speed offset

350 gsm Uncoated SRA3 Travel Document 3000 Yes Apr-05

Contamination on the fuser roll and offsetting on prints after a short run
POTENTIAL SERVICE RISK

Xerox Colotech + 100 gsm

Replica Digital 350 gsm Uncoated SRA3 Full colour brochures 3000 Yes Oct-05 Xerox Colotech + 280 gsm

Koehler white rhino ivory board 335 gsm Uncoated 320 x 460 Full Colour 3000 Yes Jul-08 Print quality marginal using default settings.

Coated 1 side
Zanders CX900 80 gsm Coated 1 side 320x445 wine bottle labels 500 No Jun-05 Simplex only. Avoid large areas of flat tint and high coverage.

Chromolux 900

80 gsm Coated 1 side SRA3 wine bottle labels 1000 No Jan-07

Simplex only. Avoid large areas of flat tint and high coverage.Use decurlers to adjust postfuser curl
and avoid jams in stacker.

Venicleux 1/s digital 170 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion
Bindakote 180 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion
Galerie image 195 gsm Coated 1 side 364 x 521 cover for Software manuals 2000 No Jul-03 Simplex only
Venicleux 1/s digital 210 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion

Chromocard

210 gsm Coated 1 side SRA3 Greeting cards, Packaging 3000 Yes Nov-08 Trail Edge flick,Poor Toner adhesion on 2nd side, High coverage prints can adhere to fuser roll. Xerox Pacakgig Board

Pre printed Christmas cards 240 gsm Coated 1 side 190x 241 Christmas cards 4500 No Jun-05 Simplex only, Short Edge feed.
Galerie image 240 gsm Coated 1 side 364 x 521 cover for Software manuals 2000 No Jul-03 Simplex only

Tambrite

240 gsm/ 440
microns

Coated 1 side 364 x 571 Packaging 3000 No Feb-05 Simplex only, Only to top tray or Bypass tray. Xerox Pacakgig Board

Triplex Gris 350 microns 250 gsm Coated 1 side 364 x 571 Packaging 3000 No Apr-08

Simplex only, Only to top tray or Bypass tray. Image mottle in Reds. Toner adhesion can be

Xerox Pacakgig Board

Suomiboard

250 gsm Coated 1 side 315 x 440 Packaging 3000 No May-08

Simplex only.Image registrationissue lead edge to Trail edge.Toner adhesion is poor can be
improved running in EIP mode or will require varnishing or lamination.

Xerox Pacakgig Board

Performa Cream 250 gsm Coated 1 side A3 Packaging 400 Yes Dec-05 Small Test only. Xerox Pacakgig Board
Neocart 250 gsm Coated 1 side 364 x 571 Packaging 3000 No Feb-05 Simplex only, Only to top tray or Bypass tray. Xerox Pacakgig Board
Incad Exell 270 gsm Coated 1 side A3 Packaging 400 Yes Dec-05 Small Test only. Xerox Pacakgig Board

3 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Neocart

270 gsm / 450
micron

Coated 1 side 364 x 521 Pharmaceutical packaging 6000 No Jun-03 Simplex only Xerox Pacakgig Board

Bindakote 250 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion Xerox Pacakgig Board
Venicleux 1/s digital 250 gsm Coated 1 side A3 Covers 200 Yes Nov-04 Toner adhesion not good on 3 and 4 colours. EIP mode may improve toner adhesion Xerox Pacakgig Board
Chromocard 255 gsm Coated 1 side SRA3 Greeting cards, Packaging 3000 Yes Nov-08 Trail Edge flick,Poor Toner adhesion on 2nd side, fuser roll damage due to picking Xerox Pacakgig Board

Avanta Prima

275 gsm/ 450
microns

Coated 1 side 364 x 521 Pharmaceutical packaging 6000 No Jun-03 Simplex only Xerox Pacakgig Board

Multicolor Mirabell 280 gsm Coated 1 side 364 x 500 Covers 3000 Yes Apr-07 Print mottle, Multifeeding. Xerox Pacakgig Board

Galerie Vision

285 gsm Coated 1 side 402 x 330 Full colour 5000 Yes Mar-09

Autoduplex to top tray only. Simplex to main tray. Print Mottle.Fuser roll life will be reduced
significantly when using this media.

Neocart 290gsm Coated 1 side SRA3 Packaging 1000 Yes Oct-05 stiffness causes trail edge disturbances. Skewing of sheets causes misregistration Xerox Pacakgig Board
Invercote G 300 gsm Coated 1 side SRA3 Greeting cards, Packaging 1000 Yes Dec-05 Small Test only. Xerox Pacakgig Board
Chromocard 300 gsm Coated 1 side SRA3 Greeting cards, Packaging 1000 Yes Nov-05 Poor print Mottle, transfer issues Xerox Pacakgig Board
Invercote 350 gsm Coated 1 side SRA3 Greeting cards, Packaging 1000 Yes Nov-05 F eeding and runability issues, transfer issues. Xerox Pacakgig Board
UPM Finesse 400 gsm Coated 1 side A3 Greeting cards, Packaging 400 Yes Dec-05 Small Test only. Xerox Pacakgig Board
Coated 2 side Matt

UPM Finnesse

70 gsm Coated 2 Side Matt 364 x 521 book 1000 Yes Feb-05 jams in fuser, registration and stacker. Fuser roll contaminations, retacking of prints in fuser.

G Print 90 gsm Coated 2 Side Matt 360 x 510 Full Colour 3000 Yes Aug-08 Recommend simplex only. Low area coverage prints. Expect creasing , deletions and jams. Xerox Colotech + Silk 120 gsm

Novatech Matt

90 gsm Coated 2 Side Matt 363 x 521 Software manual 2999 Yes Feb-05 jams in fuser, registration and stacker. Fuser roll contaminations, retacking of prints in fuser.

UPM Finesse Bulky Matt

100 gsm Coated 2 Side Matt SRA3 3000 Yes Jan-06 Print quality is poor in reds . Stacking is por with folded corners. Xerox Colotech + Coated Silk 140 gsm

Novatech Matt 100 gsm Coated 2 Side Matt 362 x 521 Software manual 2998 Yes May-03 Cockle in Printed sheets

G Print

100 gsm Coated 2 Side Matt 353 x 500 Full colour 3000 Yes Dec-07 Recommend simplex only. Low area coverage prints. Expect creasing , deletions and jams. Xerox Colotech + Coated Silk 120 gsm

Novatech Matt 115 gsm Coated 2 Side Matt 362 x 521 Software manual 2998 Yes Feb-05 Cockle in Printed sheets

Zanders Mega Matt

115 gsm Coated 2 Side Matt 300 x 470 Full colour 3000 Yes Aug-08 Deletions, creasings and high jam rate make this product not recommended Xerox Colotech + Coated Silk 120 gsm

G Print

115gsm Coated 2 Side Matt 353 x 500 Full colour 3000 Yes Dec-07 Recommend simplex only. Low area coverage prints. Expect creasing , deletions and jams. Xerox Colotech + Coated Silk 120 gsm

Arctic Matt

115gsm Coated 2 Side Matt SRA3 reports 3000 Yes Mar-03 Xerox Colotech + Coated Silk 120 gsm

UPM Finesse Bulky Matt

130 gsm Coated 2 Side Matt SRA3 3000 Yes Jan-06 Print quality is poor in reds. Xerox Colotech + Coated Silk 140 gsm

Arctic Matt

130 gsm Coated 2 Side Matt SRA3 reports 3000 Yes Feb-05 Cleaning web becomes comtaminated quickly. Higher fuser oil usage. Xerox Colotech + Coated Silk 140 gsm

Sattimatt

130 gsm Coated 2 Side Matt SRA3 Full Colour 600 Yes Apr-05 Only a small volume was tested. Xerox Colotech + Coated Silk 130 gsm

Silverblade Digital Matt

130 gsm Coated 2 Side Matt SRA3 Full Colour 2500 Yes Jul-07 Image mottle and poor stacking. Xerox Colotech + Coated Silk 140 gsm

Silverblade Matt

130 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-02 This media is adversely reactive in wet environment Xerox Colotech + Coated Silk 140 gsm

Chorus Matt

135gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity,Poor Stacking, folded corners Xerox Colotech + Coated Silk 140 gsm

Real Digital Matt

135gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Sep-06 Higer jam rate Xerox Colotech + Coated Silk 140 gsm

Arctic White Smooth

135 gsm Coated 2 Side Matt SRA3 reports 3000 Yes Mar-03 Xerox Colotech + Coated Silk 140 gsm

Novatech Matt

150 gsm Coated 2 Side Matt 362 x 521 Software manual 3000 Yes Feb-05 Cockle in Printed sheets Xerox Colotech + Coated Silk 170 gsm

Arctic Matt

160 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-08 Toner adhesion marginal. Xerox Colotech + Coated Silk 170 gsm

Silverblade Matt

150 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Apr-06 Xerox Colotech + Coated Silk 170 gsm

Garda Matt

170 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-06 Toner adhesion is marginal and EIP mode is advised. Fuser offseting may occur on long runs Xerox Colotech + Coated Silk 170 gsm

Symbol Free life

170 gsm Coated 2 Side Matt SRA3 Full Colour 500 Yes Mar-09 small test. Misfeeding due to badly cut edges. Xerox Colotech + Coated Silk 170 gsm

Chorus Matt

170 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-06 Very Poor toner adhesion. Would lead to comtamination in Fuser system Xerox Colotech + Coated Silk 170 gsm

Silverblade Matt

170 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Apr-04 Oil streaks in print. Potential service risk Xerox Colotech + Coated Silk 170 gsm

Chorus Matt

200 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-06 Very Poor toner adhesion. Would lead to comtamination in Fuser system Xerox Colotech + Coated Silk 210 gsm

Silverblade Matt

200 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-02 Xerox Colotech + Coated Silk 210 gsm

Not Recommended
Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

4 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Zanders mega Matt

200 gsm Coated 2 Side Matt SRA3 Yes Oct-04 Xerox Colotech + Coated Silk 210 gsm

Zanders Mega Dull

216 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-04 Xerox Colotech + Coated Silk 210 gsm

5 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Chorus Matt

250 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity, Poor toner adhesion,Poor Stacking, folded corners Xerox Colotech + Coated Silk 250 gsm

Hello matt

250gsm Coated 2 Side Matt A3 Gov. Report 2000 Yes Sep-07 Poor Toner sdhesion. Xerox Colotech + Coated Silk 250 gsm

Axelium

250gsm Coated 2 Side Matt A3 Gov. Report 2000 Yes Sep-07 Poor Toner sdhesion. Xerox Colotech + Coated Silk 250 gsm

Silverblade Matt

250 gsm Coated 2 Side Matt SRA3 Full Colour 1500 Yes Jul-07 Poor toner adhesion . Xerox Colotech + Coated Silk 250 gsm

Sati matt

250gsm Coated 2 Side Matt SRA3 Gov. Report 3000 Yes Feb-03 Xerox Colotech + Coated Silk 250 gsm

Suomi board

250gsm Coated 2 Side Matt 315 x 440 mm Packaging 500 Yes May-08

Toner adhesion is poor. EIP mode can improve the adhesion. Lead edge to trail edge registration is
outside limits .

Xerox Packaging board 250

Trucard duo

260 gsm Coated 2 Side Matt SRA3 Greeting Cards/Business cards 3000 Yes Sep-04 Xerox Colotech + Coated Silk 250 gsm

Zanders mega Matt 300gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss Xerox Colotech+ Coated Silk 280 gsm
Symbol Free life 300 gsm Coated 2 Side Matt SRA3 Full Colour 500 Yes Mar-09 small test. Misfeeding due to badly cut edges. Xerox Colotech+ Coated Silk 280 gsm
Cartamundi Corona 300gsm Coated 2 Side Matt 364 x 521 Full Colour 1000 Yes Nov-08 Moderatetoner adhesion, EIP mode may improve toner adhesion. Xerox Colotech+ Coated Silk 280 gsm

Zanders mega Matt

350gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss Xerox Colotech + Coated Silk 350 gsm

Garda Matt

350 gsm Coated 2 Side Matt SRA3 Full Colour 3000 Yes Jan-06 Toner adhesion is marginal and EIP mode is advised. Fuser offseting may occur on long runs Xerox Colotech + Coated Silk 350 gsm

Novatech Matt

350 gsm Coated 2 Side Matt 362 x 521 Software manual 3000 Yes Feb-05 Cockle in Printed sheets Xerox Colotech + Coated Silk 350 gsm

Trucard duo**

400 gsm Coated 2 Side Matt SRA3 Greeting Cards/Business cards 3000 Yes Sep-04

Feeding, registration, stacking problems. Needed EIP mode, Fuser damaged end of run. POTENTIAL
SERVICE RISK

Xerox Colotech + Coated Silk 350 gsm

Coated 2 side Silk/Satin

Tera Print SB

70 gsm Coated 2 Side Silk

350 x 500 mm
(LG)

Full Colour 3000 Yes May-08 Due to creasing of the paper, deletions, fuser picking and many jams this media is not recommeded. Xerox Colotech + Coated Silk 120 gsm

HannoArt silk*

90 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Jan-02 Stack quality and Stack Height may be affected due to media structure or high area coverage Xerox Colotech + Coated Silk 120 gsm

Black label Satin

90 gssm Coated 2 Side Satin SRA3 Full Colour 3000 Yes Feb-05 jams in fuser, registration and stacker. Fuser roll contaminations, retacking of prints in fuser. Xerox Colotech + Coated Silk 120 gsm

Condat Offset Silk

90 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Aug-05 Jams in Fuser, retacking of prints in fuser. Xerox Colotech + Coated Silk 120 gsm

9 Lives

100 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated Silk 120 gsm

Black label Satin

115 gsm Coated 2 Side Satin SRA3 Full Colour 3000 Yes Sep-07 Recent information from customers is reliability issues and increase parts usage Xerox Colotech + Coated Silk 120 gsm

Condat digital Silk

115 gsm Coated 2 Side Silk 320 x 460 Full Colour 1000 Yes Feb-08

Creasing and deletions can occur due to the light weight of the paper. high area coverage of prints is

not recommended.

Xerox Colotech + Coated Silk 120 gsm

Maxi Silk

115 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Sep-06 retacking of prints to fuser rolls with very heavy coverage Xerox Colotech + Coated Silk 120 gsm

LumiSilk

115 gsm Coated 2 Side Silk 364 x 521 Software manual 3000 Yes Jul-03 Cockle in Printed sheets Xerox Colotech + Coated Silk 120 gsm

Lazulis( Condat Silk)

135 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Jun-05 Print mottle and runability issues Xerox Colotech + Coated Silk 120 gsm

LumiSilk

130 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Nov-08 Creasing in the sheets, stacking poor. Xerox Colotech + Coated Silk 120 gsm

9 Lives

130 gsm Coated 2 Side Silk A4 Full Colour 1000 Yes Oct-08 Xerox Colotech + Coated Silk 120 gsm

UPM Digi Finesse Silk

130 gsm Coated 2 Side Silk SRA3 Full colour 3000 Yes Dec-07 Deletions, cockled sheets, poor toner adhesion Xerox Colotech + Coated Silk 120 gsm

Voltage

130 gsm Coated 2 Side Satin SRA3 Booklet 3000 Yes May-04 Poor Fusing, POTENTIAL SERVICE RISK Xerox Colotech + Coated Silk 140 gsm

Galarie Art Silk 130 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Oct-05 Print Mottle, Marginal Toner adhesion, high curl causing stacking issues. Wavey stack Xerox Colotech+ Coated silk 130 gsm
Hello Silk 130 gsm Coated 2 Side Silk SRA3 Brochure 3000 Yes Feb-08 Print Mottle. Xerox Colotech+ Coated silk 130 gsm
Black label Satin 150 gsm Coated 2 side Satin SRA3 Full Colour 3000 Yes Feb-05

Multi Art Silk

150 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Jan-06 Small scale print mottle observed. Poor Stacking due to folded corners Xerox Colotech + Coated Silk 170 gsm

Hello Silk

150 gsm Coated 2 Side Silk SRA3 Full Colour 30000 Yes Jan-02 Xerox Colotech + Coated Silk 170 gsm

9 Lives

150 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated Silk 170 gsm

Symbol Free life 170 gsm Coated 2 Side Satin SRA3 Full Colour 500 Yes Mar-09 small test. Toner adhesion lower on 2nd side. Xerox Colotech+ Coated silk 1 70 gsm

UPM Digi Finesse Silk

170 gsm Coated 2 Side Silk SRA3 Full colour 3000 Yes Dec-07 Deletions, marginal toner adhesion Xerox Colotech+ Coated Gloss 170 gsm

Not Recommended

Not Recommended

Marignal Toner adhesion

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

This was a short test. Customers may experience issues on longer runs and with larger sheet sizes

6 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Condat digital Silk

170 gsm Coated 2 Side Silk 320 x 460 Full Colour 1000 Yes Feb-08 Xerox Colotech + Coated Silk 170 gsm

Aleo 80 Silk

170 gsm Coated 2 Side Silk SRA3 Full Colour 500 Yes Mar-09 Small test.Very poor toner adhesion 2nd side. Xerox Colotech + Coated Silk 170 gsm

High Tech Silk

170 gsm Coated 2 Side Silk SRA3 Brochure 3000 Yes Nov-04 Xerox Colotech + Coated Silk 170 gsm

7 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Core Silk 170 gsm Coated 2 Side Silk SRA3 Full Colour 2500 Yes Mar-08 Toner adhesion can be variable and may impact fuser life. Xerox Colotech+ Coated silk 170 gsm

LumiSilk

170 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Nov-08 Xerox Colotech + Coated Silk 170 gsm

Hello Silk 170 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Mar-04 Print Mottle Xerox Colotech+ Coated silk 170 gsm
Lazulis( Condat Silk) 200 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Jun-05 Print mottle

UPM Digi Finesse Silk

200 gsm Coated 2 Side Silk SRA3 Full colour 3000 Yes Dec-07 marginal toner adhesion Xerox Colotech+ Coated Gloss 210 gsm

Condat digital Silk

200 gsm Coated 2 Side Silk 320 x 460 Full Colour 1000 Yes Feb-08 Xerox Colotech + Coated Silk 210 gsm

9 Lives

200 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated Silk 210 gsm

Hello Silk 250 gsm Coated 2 Side Silk SRA3 Brochure 3000 Yes Sep-06 No issues seen Xerox Colotech+ Coated Silk 250 gsm

Condat digital Silk

250 gsm Coated 2 Side Silk 320 x 460 Full Colour 1000 Yes Feb-08 Xerox Colotech + Coated Silk 250 gsm

UPM Digi Finesse Silk

250 gsm Coated 2 Side Silk SRA3 Full colour 3000 Yes Dec-07 Poor toner adhesion Xerox Colotech + Coated Silk 250 gsm

Green Coat Velvet

250 gsm Coated 2 Side Silk SRA3 Full Colour 1000 Yes Nov-08 Toner adhesion is marginal, use EIP mode to improve toner adhesion Xerox Colotech + Coated Silk 250 gsm

Regency Satin

250 gsm Coated 2 Side Silk SRA3 Full Colour 1000 Yes Dec-08 Toner adhesion is marginal, use EIP mode to improve toner adhesion Xerox Colotech + Coated Silk 250 gsm

9 Lives

250 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated Silk 250 gsm

Symbol Free life 250gsm Coated 2 Side Satin SRA3 Brochure 3000 Yes May-08 Xerox Colotech+ Coated Silk 250 gsm
Voltage 260 gsm Coated 2 Side Satin SRA3 Brochure 3000 Yes May-04 Poor Fusing, POTENTIAL SERVICE RISK Xerox Colotech+ Coated Silk 250 gsm

LumiSilk

300 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Nov-08 Xerox Colotech + Coated Silk 280 gsm

Hello Silk

300 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Feb-08 Print Quality Xerox Colotech + Coated Silk 280 gsm

Claro Silk

300 gsm Coated 2 Side Silk SRA3 Full Colour 2000 Yes Jun-07 Print Mottle, Print quality issues, Mulifeed jams.caution should be used with this media. Xerox Colotech + Coated Silk 280 gsm

Lazulis( Condat Silk)

300 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Jun-05 Print mottle seen in prints and may not meet customers expectations Xerox Colotech + Coated Silk 280 gsm

9 Lives

300 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Aug-06 Xerox Colotech + Coated Silk 280 gsm

Digital Green Coat velvet

300 gsm Coated 2 Side velvet SRA3 Full Colour 3000 Yes Aug-04 Image mottle and stacker jams. Potential service risk Xerox Colotech + Coated Silk 280 gsm

High Tech Silk

300 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Jan-06 Xerox Colotech + Coated Silk 280 gsm

Condat digital Silk

300 gsm Coated 2 Side Silk 320 x 460 Full Colour 1000 Yes Feb-08 Xerox Colotech + Coated Silk 280 gsm

Symbol Free life

300 gsm Coated 2 Side Satin SRA3 Full Colour 500 Yes Mar-09 small test. Toner adhesion lower on 2nd side. Xerox Colotech + Coated Silk 280 gsm

UPM Digi Finesse Premium 350 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Apr-07 Poor transfer,Poor Toner adhesion Xerox Colotech+ Coated silk 350 gsm
Aleo 80 Silk 350 gsm Coated 2 Side Silk SRA3 Full Colour 500 Yes Mar-09 Small test. Very poor stacking, will cause jams. Xerox Colotech+ Coated silk 350 gsm
Era Silk 350 gsm Coated 2 Side Silk SRA3 Full Colour 500 Yes Mar-09 Small test. Very poor stacking, will cause jams. Xerox Colotech+ Coated silk 350 gsm
High Tech Silk 350 gsm Coated 2 Side Silk SRA3 Full Colour 3000 Yes Jan-06 Xerox Colotech+ Coated silk 350 gsm
Black label Satin 350 gsm Coated 2 Side Satin SRA3 Full Colour 3000 Yes May-05 Xerox Colotech+ Coated silk 350 gsm
Soverign Silk 400 gsm Coated 2 Side Silk SRA3 Full Colour Brochure 3000 Yes Oct-05 Poor toner adhesion leading to fuser contamination Xerox Colotech+ Coated silk 350 gsm
Coated 2 Side Gloss

Hello Gloss

80 gsm Coated 2 Side Gloss A4 Medical Journal 2000 Yes Feb-03

Excessive Dust or contamination was observed in the machine after a short run; poor stripping from
fuser roll, POTENTIAL SERVICE RISK

Black label Gloss 90 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes May-05
Hello Gloss 90 gsm Coated 2 Side Gloss A4 Medical Journal 2000 Yes Feb-03 Poor stripping from fuser, POTENTIAL SERVICE RISK

Igepa profiGloss

100 gsm Coated 2 Side Gloss SRA3 Car manual 3000 Yes Mar-04 Poor stripping from fuser with Heavy toner coverage. Xerox Colotech+ Coated Gloss 120 gsm

Novatech Gloss

115 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Nov-07 Print Mottle and deletions can occur with this paper quality. Xerox Colotech+ Coated Gloss 120 gsm

UPM Digi Finesse Gloss

115 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Dec-07 Creasing can occur Xerox Colotech+ Coated Gloss 120 gsm

Pionner Gloss

115 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Jun-04 Xerox Colotech+ Coated Gloss 120 gsm

Core Gloss

115 gsm Coated 2 Side Gloss SRA3 Booklets 3000 Yes Oct-04 Cockle in Printed sheets Xerox Colotech+ Coated Gloss 120 gsm

Condat Digital Gloss

115 gsm Coated 2 Side Gloss 320 x 460 Full colour 1000 Yes Feb-08 Poor toner adhesion, creasing, deletions, jams Xerox Colotech+ Coated Gloss 120 gsm

Marginal toner adhesion

No issues seen

Not Recommended

Not Recommended

Not Recommended Very high jam rate

Not Recommended

Not Recommended

8 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Multi Art Gloss

130 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Nov-08 poor toner adhesion, creasing should be expected when runing this paper. Xerox Colotech + Coated Gloss120 gsm

LumiArt

130 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Nov-08 Xerox Colotech + Coated Gloss120 gsm

Galaxi Brilliant

135 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Nov-08 Stacking very poor due to high curl. Xerox Colotech+ Coated Gloss 130 gsm

Silver digital Gloss

130 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Oct-08 Creasing can occur Xerox Colotech + Coated Gloss 120 gsm

Silver digital Wove

130 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Oct-08 Creasing can occur Xerox Colotech + Coated Gloss 120 gsm

4CC Art

130 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Jun-04 Xerox Colotech+ Coated Gloss 130 gsm

Chorus Gloss

135 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity,Poor Stacking, folded corners Xerox Colotech + Coated Gloss 140 gsm

Lazulis( Condat Gloss) 135 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jun-05 Print mottle and runability issues. Pages creasing .

UPM Digi Finesse Gloss

150 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Dec-07 Cockle in Printed sheets Xerox Colotech+ Coated Gloss 140 gsm

Multi Art Gloss

150 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Small scale print mottle observed. Poor Stacking due to folded corners Xerox Colotech+ Coated Gloss 140 gsm

Chorus Gloss

170 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Very Poor toner adhesion. Would lead to comtamination in Fuser system Xerox Colotech+ Coated Gloss 170 gsm

Symbol Free life

170 gsm Coated 2 Side Gloss SRA3 Brochure 500 Yes Mar-09 small test. Toner adhesion very poor on 2nd side. Xerox Colotech+ Coated Gloss 170 gsm

UPM Digi Finesse Gloss

170 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Dec-07 Xerox Colotech+ Coated Gloss 170 gsm

Condat Digital Gloss

170 gsm Coated 2 Side Gloss 320 x 460 Full colour 1000 Yes Feb-08 Poor toner adhesion, jams Xerox Colotech+ Coated Gloss 170 gsm

Silver digital Gloss

170 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Jun-04 Oil streaks in print. Potential service risk Xerox Colotech + Coated Gloss 170 gsm

LumiArt

170 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Nov-08 Poor toner adhesion 2nd side. EIP mode may improve adhesion. Xerox Colotech + CoatedGloss 170 gsm

Leykam Gloss

170 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use Xerox Colotech+ Coated Gloss 210 gsm

Dtec V4

170 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Apr-05 Toner adhesion is marginal and EIP mode is advised Xerox Colotech + Coated Gloss 170 gsm

Chorus Gloss

200 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Very Poor toner adhesion. Would lead to comtamination in Fuser system Xerox Colotech + Coated Gloss 210 gsm

Alterego

200 gsm Coated 2 Side Gloss SRA3 Full colour 3000 yes Jan-02 Xerox Colotech + Coated Gloss 210 gsm

Lazulis( Condat Gloss)

200 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jun-05 Print mottle present in prints, Poor toner adhesion, EIP mode may improve toner adhesion. Xerox Colotech + Coated Gloss 210 gsm

Silver Digital

200 gsm Coated 2 Side Gloss 320 x 460mm Full Colour 3000 Yes Sep-08 Xerox Colotech + Coated Gloss 210 gsm

Profi Gloss

200 gsm Coated 2 Side Gloss 320 x 460mm Full Colour 3000 Yes Sep-08 Toner adhesion is poor, especially on 2nd side and should be validated before use Xerox Colotech + Coated Gloss 210 gsm

Condat Digital Gloss

200 gsm Coated 2 Side Gloss 320 x 460 Full colour 1000 Yes Feb-08 Poor toner adhesion, jams Xerox Colotech+ Coated Gloss 210 gsm

Leykam Gloss

225 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validatedby customer before use Xerox Colotech+ Coated Gloss 210 gsm

Zanders Mega Gloss

216 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-04 Xerox Colotech+ Coated Gloss 210 gsm

Triplex blanco 345 microns 250 gsm Coated 2 Side Gloss 350 x 500 Full Colour 250 Yes Apr-08 Simplex only recommended. Auto duplex not recommended Xerox Packaging Board.

Ningbo

250 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Dec-06 Jams frequently in stacker Xerox Colotech+ Coated Gloss 250 gsm

UPM Digi Finesse Gloss

250 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Dec-07 Xerox Colotech+ Coated Gloss 170 gsm

Black Label Gloss

250 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Nov-07 Toner adhesion is marginal and customer can expect some jams Xerox Colotech+ Coated Gloss 250 gsm

Chorus Gloss

250 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor Print qulaity, Poor toner adhesion,Poor Stacking, folded corners Xerox Colotech + Coated Silk 250 gsm

Galarie Gloss

250 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Aug-06 Print quality defects in a few sheets. Xerox Colotech+ Coated Gloss 250 gsm

4CC Art

250 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Jun-04 Print quality defects in a few sheets. Xerox Colotech+ Coated Gloss 250 gsm

Pionner Gloss

250 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Jun-04 Xerox Colotech+ Coated Gloss 250 gsm

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

9 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Condat Digital Gloss

250gsm Coated 2 Side Gloss 320 x 460 Full colour 1000 Yes Feb-08 Poor toner adhesion, jams Xerox Colotech+ Coated Gloss 250 gsm

Not Recommended

10 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Novatech Gloss

250gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Nov-07 Differential gloss, marginal toner adhesion 2nd side. Xerox Colotech+ Coated Gloss 250 gsm

Invercote Albato

250 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Excessive jams, Transfer issues, poor toner adhesion Xerox Colotech+ Coated Gloss 250 gsm

Sappi Voltage

260 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes May-04 Poor Fusing, POTENTIAL SERVICE RISK Xerox Colotech+ Coated Gloss 250 gsm

Silver digital Gloss

300 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Oct-08 Xerox Colotech + Coated Gloss 280 gsm

Silver digital wove

300 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Oct-08 Xerox Colotech + Coated Gloss 280 gsm

Leykam Gloss

300 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use Xerox Colotech+ Coated Gloss 280 gsm

Lazulis( Condat Gloss)

300 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jun-05 Print mottle present in prints, Poor toner adhesion, EIP mode may improve toner adhesion. Xerox Colotech + Coated Gloss 280 gsm

UPM Digi Finesse Gloss

300 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Dec-07 PoorToner adhesion Xerox Colotech+ Coated Gloss 280 gsm

Symbol Free life

300 gsm Coated 2 Side Gloss SRA3 Full Colour 500 Yes Mar-09 small test. Toner adhesionvery poor low on 2nd side. Xerox Colotech+ Coated Gloss 280 gsm

Condat Digital Gloss

300 gsm Coated 2 Side Gloss 320 x 460 Full colour 1000 Yes Feb-08 Poor toner adhesion, jams Xerox Colotech+ Coated Gloss 280 gsm

Dtec V4

300 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Apr-05 Print mottle in heavt red colours, Gloss variations Xerox Colotech + Coated Gloss 280 gsm

Splendorgel Ivory

300 gsm Coated 2 Side Gloss SRA3 Greeting Card 100 Yes Apr-03

EIP mode may be needed for acceptable image permanence
Jams in stacker in Auto Duplex mode
Evaluation based on low volume test, POTENTIAL SERVICE RISK

Xerox Colotech+ Coated Gloss 280 gsm

Novatech Gloss

300 gsm Coated 2 Side Gloss 362 x 521 Software manual 3000 Yes May-05 Cockle in Printed sheets Xerox Colotech+ Coated Gloss 280 gsm

Excelsior

300 gsm Coated 2 Side Gloss SRA3 Greeting Card 100 Yes Apr-03

EIP mode may be needed for acceptable image permanence
Jams in stacker in Auto Duplex mode
Evaluation based on low volume test, POTENTIAL SERVICE RISK

Xerox Colotech+ Coated Gloss 280 gsm

High Tech Gloss

300 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor toner Adhesion Xerox Colotech + Coated Gloss 280 gsm

LumiArt

300 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Nov-08 Xerox Colotech + Coated Gloss 280 gsm

Zanders Mega Gloss

300gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss Xerox Colotech + Coated Gloss 280 gsm

Zanders Mega Gloss

350gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jul-05 Poor toner adhesion, differential Gloss Xerox Colotech + Coated Gloss 280 gsm

Trucard Duo Gloss

350 gsm Coated 2 Side Gloss SRA3 Swing Tickets 3000 Yes Feb-05 Xerox Colotech + Coated Gloss 350 gsm

Black Label Gloss

350 gsm Coated 2 Side Gloss 362 x 521 Software manual 3000 Yes May-05 Cockle in Printed sheets Xerox Colotech + Coated Gloss 350 gsm

Media Print Gloss

350 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Toner adhesion is marginal and EIP mode is advised. Fuser offseting may occur on long runs Xerox Colotech + Coated Gloss 350 gsm

High Tech Gloss

350 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Jan-06 Poor toner Adhesion Xerox Colotech + Coated Gloss 350 gsm

UPM Digi Finesse Gloss

350 gsm Coated 2 Side Gloss SRA3 Full colour 3000 Yes Dec-07 PoorToner adhesion Xerox Colotech + Coated Gloss 350 gsm

Ningbo

350 gsm Coated 2 Side Gloss SRA3 Full Colour 3000 Yes Dec-06

Print quality will show differential gloss.Jams frequently in stacker, Paper surface is soft and can be
easily damaged by handling and transport in Press

Xerox Colotech + Coated Gloss 350 gsm

Lumi Digital Gloss

350 gsm Coated 2 Side Gloss SRA3 Full Colour 5000 Yes Jan-06 Toner adhesion variable from side to side. EIP mode will improve toner adhesion Xerox Colotech + Coated Gloss 350 gsm

Leykam Gloss

350 gsm Coated 2 Side Gloss SRA3 Brochure 3000 Yes Aug-06 Toner adhesion is poor and should be validated before use Xerox Colotech + Coated Gloss 350 gsm

High Gloss coated one side and 2 side Paper

Lustralux

260 gsm Coated 2 Side High Gloss SRA3 Full Colour 200 Yes Jun-07 Small quantity tested only, Poor Toner adhesion, caution should be used when running this media. Xerox Colotech+ Coated Gloss 250 gsm

Chromoulux 2Z (800) 250 gsm 0 315 x 440 Full Colour 200 Yes Sep-07 Very Poor Toner adhesion Xerox Colotech Supergloss 250 gsm

Chromoulux 1Z (700)

250 gsm Coated 1 Side high Gloss 315 x 440 Full Colour 200 Yes Sep-07 Very Poor Toner adhesion Xerox Colotech Supergloss 250 gsm

Chromoulux 900

80 gsm Coated 1 Side high Gloss SRA3 Full Colour 1000 Yes Jan-07 High post fuser curl will cause jams and stack quality issues. Xerox Colotech Supergloss 250 gsm

Recycled Paper
Office Paper Multiline Eco Plus 80 gsm Recycled SRA3 Gov. Report 2000 Yes Oct-03
Recycled Supreme 80 gsm Recycled SRA3 Gov. Report 2000 Yes May-03

V Green 100 % recycled

80 gsm Recycled SRA3 Full colour 3500 Yes Jan-08 Grainy prints, Some contamination on fuser external heat rolls, which will need regular cleaning.

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

11 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Biber Copy Novanta 80 gsm Recycled SRA3 Gov. Report 2000 Yes Sep-03 Print Deletion, POTENTIAL SERVICE RISK
Planojet 80 gsm Recycled SRA3 Gov. Report 1000 Yes Sep-03 Cockle in Printed sheets

12 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Revive Print

80 Recycled uncoated 315 x 440 Full Colour 200 Yes Sep-07

Not all colours reproduce well, Quantity tested was small and there fore caution is advised when
using this media.

Ecoline Recycling 80 gsm Recycled SRA3 Gov. Report 1000 Yes Sep-03 Cockle in Printed sheets

Revive Print

100 Recycled uncoated 315 x 440 Full Colour 200 Yes Sep-07

Not all colours reproduce well, Quantity tested was small and there fore caution is advised when
using this media.

Cyclus 115 gsm Recycled SRA3 Gov. Report 2000 Yes Oct-04 Excessive jams during run
Revive Silk 130 gsm Recycled Coated SRA3 3000 Yes Feb-07 Sheets are prone to crease and cause jams
Revive 50/50 offset 170 gsm Recycled uncoated SRA3 Full Colour 500 Yes Mar-09 Smalll test Xerox Reycled Uncoated
Revive 50/50 silk 170 gsm Recycled Coated SRA3 Full Colour 500 Yes Mar-09 Smalll test Xerox Reycled Coated
Revive Special 170 gsm Recycled Coated SRA3 Full Colour 500 Yes Mar-09 Smalll test Xerox Reycled Coated
Revive Special 300 gsm Recycled Coated SRA3 Full Colour 500 Yes Mar-09 Smalll test, Very poor toner adhesion on 2nd side. Xerox Reycled Coated
Cyclus 300 gsm Recycled SRA3 Gov. Report 3000 Yes Sep-07 poor print quality,multifeeds,contamination. Xerox Reycled Uncoated
Revive 50/50 offset 350 gsm Recycled Uncoated SRA3 Full Colour 500 Yes Mar-09 Smalll test Poor print quality, Very poor stacking Xerox Reycled Uncoated
Revive 50/50 silk 350 gsm Recycled Coated SRA3 Full Colour 500 Yes Mar-09 Smalll test Poor print quality, Very poor stacking Xerox Reycled Coated
Era Silk 350 gsm Recycled Coated SRA3 Full Colour 3000 Yes Mar-07 Poor Print quality and mottle , Toner Adhesion poor side to side. Xerox Reycled Coated
Synthetic and speciality
Teslin 163 gsm Polyolefin A3 Diplomas 1000 Yes Jul-04 Poor Image quality, Poor fusing ,poor runability Xerox DuraPaper X 250
Tyvek 4182 105 gsm Synthetic A3 manuals for Marine Vessels 100 No Nov-03 Wrinkle Xerox DuraPaper X 250

Artysyn 250

250 microns Polyolefin A4 key tags 1000 No Apr-05

Excessive jams during run

Xerox DuraPaper X 250

Artysyn 250

250 microns Polyolefin A3 key tags 1000 No Apr-05

Excessive jams during run

Xerox DuraPaper X 250

Robuskin White PET

50 microns PET SRA3 manuals for railway engineers 3000 Yes Jun-08 Only to be used for simplex printing. Low area coverage. This media is prone to jams and static. Xerox Premium NeverTear 95 microns

Antalis Digipol Synthetic

50 microns PET 295 x 420 mm manuals 200 Yes Jun-08 Very poor runability, frequent jams, especially in auto duplex mode, can lead to damage to machine. Xerox Premium NeverTear 95 microns

Creation Star DWM 95 Micron

95 microns PET SRA3 Manuals 90 Yes Aug-05

This media can only work with very low area coverage of toner. Coverage must be unifrom. That is no
single area of high toner coverage

Xerox Premium NeverTear 95 microns

Durokote K075240 95 microns PET SRA3 Parts Manual/Catalogue 1000 Yes Jan-06 Image quality -large areas of flat tints are not recommended, as is heavy coverage Xerox Premium NeverTear 95 microns

Melinex(Dupont)

125 microns PET A3 out door applications 100 No Oct-04 Poor Image quality, Poor fusing ,poor runability Xerox Premium NeverTear 120 microns

Melinex(Dupont)

200 microns PET A3 out door applications 100 No Oct-04 Poor Image quality, Poor fusing ,poor runability Xerox Premium NeverTear 195 microns

Durokote 250

250 microns PET A4 Plant Pot Labels 20 No Jan-04

EIP mode may be needed for acceptable image permanence
Excessive jams during run

Xerox DuraPaper X 250

A PET 350 microns PET SRA3 Full Colour 1000 Yes Sep-06 PET material caused fuser damage Xerox DuraPaper X 250

ICI mark resist

185 microns PET SRA3 Full Colour 1000 Yes Jun-05

Transfer set to 120. Image quality -large areas of flat tints are not recommended, as is heavy
coverage

Xerox DuraPaper X 250

Credit Card PET

449 microns PET G SRA3 Credit Card 50 No Feb-04

Simplex only
Static may effect runnability
Media used by customer

Xerox DuraPaper X 251

Credit Card PET

450 microns PET G SRA3 Credit Card 50 No Feb-04

Simplex only
Static may effect runnability
Media used by customer

Xerox DuraPaper X 252

Polystyrene

300 microns Synthetic 360 x 520mm Full colour, Plant pot labels 1000 Yes Oct-05 Jams in Fuser causes material to melt and cause damage to fuser system Xerox Premium NeverTear 270 microns

Polystyrene

400 microns Synthetic SRA3 Plant Pot Labels 998 Yes Jul-04 Poor Image quality, Poor fusing ,poor runability Xerox Premium NeverTear 350 microns

Polystyrene

500 microns Synthetic SRA3 Plant Pot Labels 999 Yes Aug-04 Poor Image quality, Poor fusing ,poor runability Xerox Premium NeverTear 350 microns

PolyPropylene

400 micron Synthetic SRA3 Plant Pot Labels 1000 Yes Sep-04 Poor Image quality, Poor fusing ,poor runability Xerox Premium NeverTear 350 microns

PolyPropylene

500 micron Synthetic SRA3 Plant Pot Labels 1000 Yes Oct-04 Poor Image quality, Poor fusing ,poor runability Xerox Premium NeverTear 350 microns

EVC PVC 200 micron PVC SRA3 Credit Card 3000 Yes Jul-05 Simplex only. Print to sample tray only.

MDV PVC

250 micron PVC 350x500mm Full Colour 300 Yes Apr-07 Excessive jams feeder and jams in fuser system will lead to sheets melting and causing damage Xerox DuraPaper X 250

MDV PVC

350 micron PVC 350x500mm Full Colour 350 Yes Apr-07 Image quality poor on 2nd side, jams in feeders. This media will melt in fuser if there is a jam Xerox DuraPaper X 250

Lucchesi PVC

300 micron PVC 350x500mm Full Colour 300 No Jun-05 simplex only, top tray. Static may effect runability.This media will melt in fuser if there is a jam. Xerox DuraPaper X 250

PR ZOO PVC-U

400 microns PVC SRA3 Credit Card 3000 Yes Jun-05

Poor feeding,Severe Contamination, Very poorStacking, very poor toner adhesion . This media
should not be used.

Xerox Premium NeverTear 350 microns

EVC PVC

400 micron PVC SRA3 Credit Card 2800 No Oct-07

Simplex only. Print to sample tray only. Default transfre settings need adjusting to help
runnability.This media will melt in fuser if there is a jam

Xerox Premium NeverTear 350 microns

Alkorprint 320 microns PVC 320x450 mm Luggage Tag 3000 Yes Apr-05 Jams excessively . Print quality not suitanble for all print files Xerox DuraPaper X 250

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended
Not Recommended

Not Recommended

Not Recommended

Not Recommended

13 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

NoviTech (perforated Luggage Tag)

145gsm
perforated

composite material A3 Luggage Tag 5000 Yes Jun-07

Multiple jams, high reactivity of paper,stacking poor , jams in stacker. Contaminated fuser web
indicates possibel fis

Xerox DuraPaper X 250

14 of 22 Revision Nov 2008

Product Description Weight g/m2 Coating type Size Application

Number of
sheets run

Image
Quality

Image

Permanence

Runnability

Auto

Duplex

Date of

test

Notes

Xerox Guaranteed Media
Alternative

iGen3 Digital Production Press Non-Xerox Tested Media List - Europe - April 2010

Green - Good test results, purchase a small quantity to insure expectations are met.

Yellow - Customer should validate the limitations are acceptable for their application.

Not Recommended

Xerox makes no guarantees or warranties, either expressed or implied, concerning the performance, use, consistency or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media

product for the first time, customers are advised to purchase small quantities to insure that expectations are met. For guaranteed best performance, use digitally optimized paper and specialty media from Xerox Supplies.

The Non-Xerox Tested Media List contains non-Xerox branded paper and specialty media. Xerox has tested many media products on the Xerox iGen3 Digital Production Press and based on such testing have published this list of tested media products which may or may not, at the time of and based upon such testing, meet Xerox performance criteria. No subsequent testing has been done and

therefore no determination can be made as to whether or not such products would currently fail or pass Xerox performance criteria.

Envelopes

Envelope- Kraft

130 gsm

Envelope (Sac) peel and
Stick

229 x 324mm Envelope printing 20 No Feb-04

Wrinkle
Excessive jams during run
Misfeeds

Envelope

90 gsm

Envelope plain Peel and
Stick

229 x 324mm Envelope printing 20 Feb-04

Wrinkle
Excessive jams during run
Misfeeds

Envelope- Kraft

130 gsm

Envelope plain(pouch)
Peel and Stick

229 x 324mm Envelope printing 20 Feb-04

Wrinkle
Excessive jams during run
Misfeeds

Envelope

90 gsm

Envelope with window
Peel &Stick

229 x 324mm Envelope printing 20 No Feb-04

Wrinkle
Excessive jams during run
Misfeeds

Translucent, Metallic
Curious Metalic 120 gsm Coated 2 side Gloss A3 Full colour 900 Yes Dec-06 Service risk due to contamination in fuser system
Zanders T2 2000 200gsm Tracing Paper A4 Full colour 500 No Sep-05 low opacity of the substrate causes misfeeds.
Simulator Translucent,metalic 90 gsm Tracing Paper SRA3 Full colour 1000 No Jan-06 low opacity of the substrate causes misfeeds.

Canson T2000 tracing paper

200 gsm Tracing Paper SRA3 Greeting Card 2 No Apr-03

Excessive jams during run
Misfeeds

Carbonless Paper, NCR
Idem Digital carbonless - CF 60 gsm Carbonless Paper CF A4 forms 200 Yes Sep-07 Poor toner adhesion, Jams and Sheets creasing
Idem Digital carbonless - CB 60 gsm Carbonless Paper CB A4 forms 200 Yes Sep-07 Poor toner adhesion, Jams and Sheets creasing
Idem Digital carbonless - CFB 80 gsm Carbonless Paper CFB A4 forms 200 Yes Sep-07 Poor toner adhesion, Jams and Sheets creasing
Idem Digital carbonless - CF 80 gsm Carbonless Paper CF A4 forms 1000 Yes Jul-05 Poor toner adhesion, Jams and Sheets creasing
Idem Digital carbonless - CB 80 gsm Carbonless Paper CB A4 forms 1000 Yes Jul-05 Poor toner adhesion, Jams and Sheets creasing
Labels, Adhesives

School Stickers - Gold label A3

136 Polyester A3 Labels 300 No May-08 Due to poor toner adhesion, high post fuser curl, and stacking jams this product is not recommended. Xerox Labels

Gloss Clear Polyester permanent label

Polyester A3 Labels 1000 No Oct-04

Simplex only, Printed image should be within die cut edges. Image permanence can be improved
with EIP mode, POTENTIAL SERVICE RISK

Gloss White Polyester permanent label

Polyester A4 Labels 1001 No Nov-04

Simplex only, Printed image should be within die cut edges. Image permanence can be improved
with EIP mode, POTENTIAL SERVICE RISK

Raflabrite 1 to view adhesive labels

180 gsm coated A4 Packaging labels 200 No Nov-05 Simplex only.High curl in sheets post printing will cause stacking and post processing jams or issues Xerox Labels

Raflabrite 40 to view adhesive labels

180 gsm coated A4 Packaging labels 600 No Nov-05

Simplex only. Print deletions around the die cuts.High curl in sheets post printing will cause stacking
and post processing jams or issues

Xerox labels

Gruppo Pasqui Bottle label 185 gsm Uncoated 364 x 571 Bottle labels 100 No Feb-08 Not Recommended due to high number of jams Xerox labels
Falck Member cards

100 gsm, Uncoated A4 Bike sticker and member card 3000 Yes Oct-08 Not Recommended due to high number of jams Xerox labels

Silver Reflective clear backed label 250 gsm Coated 345 x 495 Labels 20 No Jan-07 Poor transfer of toners, poor toner adhesion and runability jams. This was a small test. Xerox labels
Silver Reflective paper backed label 250 gsm Coated 345 x 495 Labels 20 No Jan-07 Poor transfer of toners, poor toner adhesion and runability jams. This was a small test. Xerox labels
White paper backed label 260 gsm Coated 345 x 495 Labels 20 No Jan-07 Poor transfer of toners, poor toner adhesion and runability jams. This was a small test. Xerox labels
Textured
Fedrigoni Marina Conchiglia 175 gsm Textured SRA3 Creative 200 Yes Aug-04 ATA need for Acceptable image transfer Xerox Textured 250 gsm
Fedrigoni Tintoretto Gesso 200 gsm 200 gsm Textured SRA7 Creative 200 Yes Aug-04 ATA need for Acceptable image transfer Xerox Textured 250 gsm
Fedrigoni Constellation Ivory E/E Raster 240 gsm 240 gsm Textured SRA5 Creative 200 Yes Aug-04 ATA need for Acceptable image transfer Xerox Textured 250 gsm
Fedrigoni Constellation Snow E/E Raster 240 gsm Textured SRA3 Business cards 3000 Yes Feb-03 ATA may be needed for acceptable transfer Xerox Textured 250 gsm
Fedrigoni Ivory E/E Tela 240 gsm 240gsm Textured SRA6 Creative 200 Yes Aug-04 ATA need for Acceptable image transfer Xerox Textured 250 gsm

Terreus

250 gsm Textured SRA3 Greeting Cards 250 Yes Aug-04

ATA may be needed for acceptable transfer

Xerox Textured 250 gsm

Fedrigoni Constellation Snow E21 Silk

280 gsm Textured - 1 side SRA3 Business cards 3000 No Feb-03

Jams in stacker in Auto Duplex mode
ATA may be needed for acceptable transfer

Xerox Textured 250 gsm

Sneeuww Gesat 200 gsm Textured 315 x 440 Full colour 200 Yes Sep-07 small test only. Caution when using this media. Xerox Textured Linen 250 gsm
Sneeuww Gesat 250 gsm Textured 315 x 440 Full colour 200 Yes Sep-07 small test only. Caution when using this media. Xerox Textured Linen 250 gsm
Sneeuww Linnen 250 gsm Textured 315 x 440 Full colour 200 Yes Sep-07 small test only. Caution when using this media. Xerox Textured Linen 250 gsm
ColourPlus Textured 250 gsm textured - 1 side SRA3 Greeting Cards 3000 Yes Sep-06 Poor print quality and mottle Xerox Textured 250 gsm
ColourPlus Textured 270 gsm textured - 1 side SRA3 Greeting Cards 3000 Yes Sep-06 Poor print quality and mottle Xerox Textured 250 gsm

Consular Coated

300 gsm Textured 364 x 521 Greeting Card 3000 Yes Oct-03

ATA may be needed for acceptable transfer
Media used by customer

Xerox Textured 250 gsm

Sneeuww Gesat 300 gsm Textured 315 x 440 Full colour 200 Yes Sep-07 small test only. Caution when using this media. Xerox Textured Linen 250 gsm
Feltmark 300 gsm Textured SRA3 Greeting Card 3000 Yes Oct-06 Fuser contamination Xerox Textured 250 gsm
Mellotex Regency embossed 340 gsm Texured_2 side coated SRA3 Business cards 3000 No Mar-03 Jams in stacker in Auto Duplex mode Xerox Textured 250 gsm
Galerie image embossed 235 gsm Textured SRA3 Full colour 3000 Yes Sep-07 Poor Image transfer, High curl, jams in stacker Xerox Textured 250 gsm

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended
Not Recommended

Not Recommended

Not Recommended
Not Recommended
Not Recommended
Not Recommended

Not Recommended
Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended

Not Recommended