Xerox FreeFlow Print Manager 7.0 Installation guide
FreeFlow® Print Manager 7.0
October 2008
Use the following general steps to install FreeFlow Print Manager 7.0.
To install the Print Manager 7.0
1. Ensure that any previous versions of FreeFlow Print Manager are removed from the
workstation on which FreeFlow Print Manager will be installed. Perform the
following to start the uninstall process:
• Click Start > Programs > Xerox Applications > FreeFlow Print Manager Tool Suite
<version> > Uninstall FreeFlow Print Manager Tool Suite.
NOTE: Printer Manager version 7.0 and higher must be uninstalled using the Windows Control
Panel Add or Remove Programs utility.
2. Insert the Installation CD into the CD drive on the workstation. Perform the
following to start the installer:
• If the installation program does not start automatically double-click Setup.exe to
begin the installation process. Follow the screen instructions to install the product.
NOTE: The installation program may require you to supply the operating system CD or the i386
folder location in order to install additional components necessary for the software to function.
3. After a successful installation, perform the following post-installation tasks:
Xerox Corporation
Global Knowledge &
Language Services
800 Phillips Road
MS 0218-01A
Webster, NY 14580
© 2008 Xerox
Corporation. All rights
reserved. Xerox® and
the sphere of
connectivity design, and
FreeFlow® are
trademarks of Xerox
Corporation in the US
and/or other countries.
a. Select whether a local or remote printer list will be utilized. Click Start >
Programs > Xerox FreeFlow applications > Printer Administration > FreeFlow
Printer Registration List Locator. For information on how to use the Printer List
Locator, use the online Help for the application.
b. If you are using a local printer list, set up the printer list using the Printer
Registration Tool. Click Start > Programs > Xerox FreeFlow applications >
Printer Administration > FreeFlow Printer Registration Tool. Ensure that The
Print Manager check box is selected when the program is started. For
information on how to use the Printer List Locator, use the online Help for the
application.
4. Test the installation by printing a document. For information on how to print using
Print Manager, use the online Help for the application.
The following documentation is available for instruction and use of additional FreeFlow
applications:
• Xerox FreeFlow Print Manager Job Ticket Converter Installation and User Guide,
Part Number: 701P47213
• Xerox FreeFlow JMF Service User Guide, Part Number: 701P48823
• Xerox FreeFlow Hot Folder application: available as part of the FreeFlow Print
Manager online help system.
701P48824
Loading...