Xerox Fiery EXP8000/50 Graphic Arts Package

Fiery

EXP8000/50 Color Server

Graphic Arts Package

45059280 09 February 2007

ONTENTS

CONTENTS

NTRODUCTION

Terminology and conventions

About this document

Graphic Arts Package

Graphic Arts Package, Premium Edition

Available upgrade

Enabling the feature at the Fiery EXP50

Updating the status of Graphic Arts Package

Updating the status on Windows 11

Updating the status on Mac OS 12

Setting up your monitor and the monitor proﬁle

APER

POT

IMULATION

Paper simulation workﬂow

Printing with default Paper Simulation

Paper Simulation print option 15

Paper Simulation White Point editing

Paper Simulation White Point dialog box 16

Editing Paper Simulation White Point 17

Printing with custom paper simulation values

-O

WITH

Using Two-Color Print Mapping

-C

HITE

OLOR

OINT

RINT

DITING

APPING

Deﬁning a color for Two-Color Print Mapping 23

Printing a job with Two-Color Print Mapping 25

CONTENTS

OLOR

ETUP

ColorWise Pro Tools Color Setup features

Using Color Setup 28

Control Bar

Control Bar workﬂow 29

Printing with the default Control Bar 29

Control Bar pane 31

Printing with a custom Control Bar 36

Conﬁgurable Auto Trapping

Conﬁgurable Auto Trapping workﬂow 37

Printing with default Auto Trapping 37

Auto Trapping pane 38

EATURES

Setting the Apply Auto Trapping option to On 39

Deﬁning custom values for Auto Trapping 41

Printing with the conﬁgurable Auto Trapping feature 41

Progressives

Progressives workﬂow 42

Printing with default Progressives 43

Progressives pane 44

Specifying color channels 45

Printing with custom Progressives 45

Halftone Simulation

Halftone Simulation workﬂow 46

Halftone Simulation print option 46

Printing with pre-deﬁned halftone screens 47

Halftone Simulation pane 48

Setting a custom halftone screen 49

Printing with custom halftone screens 50

Supported applications 50

Calibrating for custom halftone screens 50

CONTENTS

MAGE

IEWER

Accessing ImageViewer

OFT

ROOFING

Viewing soft proofs

REFLIGHT

OLDERS

About ﬁle conversion

Filters

Specifying ﬁlter settings for a Hot Folder

ILTERS

About PS-> PDF Normalizer 62

Using the ﬁlters

Using the CT/LW to PostScript ﬁlter 63

Using the DCS 2.0 to PostScript ﬁlter 64

Using the EPS to PostScript ﬁlter 65

Using the ExportPS ﬁlter 66

Using the JPEG to PDF ﬁlter 67

Using the PDF/X Preﬂight ﬁlter 68

Using the PDF2Go ﬁlter 69

Using the TIFF to PDF ﬁlter 70

Using the TIFF/IT to PostScript ﬁlter 71

OSTFLIGHT

About Postﬂight

Postﬂight Test Page 74

Postﬂight color-coded pages 74

Postﬂight reports 75

Postﬂight print option

CONTENTS

Postﬂight workﬂow

Scenario 1: Diagnose an unexpected color 79

Scenario 2: Check the calibration status 81

Scenario 3: Check the quality of the output proﬁle 82

Scenario 4: Diagnose a color problem of a speciﬁc object 83

ULTIPLE

Multiple plate separations workﬂow

Combine Separations print option

Supported applications

APER

LATE

IMULATION

EPARATIONS

Paper Simulation workﬂow

Paper Simulation print option

NDEX

NTRODUCTION

Terminology and conventions

INTRODUCTION

This document explains the Graphic Arts Package features and how they work. Because of the ﬂexibility of the controls Graphic Arts Package provides, users in any environment can beneﬁt from the Graphic Arts Package features. Novice users can use the default settings to obtain optimal results. Expert users with speciﬁc needs and requirements in graphic arts and other markets can also obtain optimal results by customizing the settings.

The documentation for the Fiery EXP8000/50 Color Server uses the following terminology and conventions.

Term or convention Refers to

Aero Fiery EXP8000/50 (in illustrations and examples)

Digital press DocuColor 8000/7000/5000 digital press

Fiery EXP8000/50 Fiery EXP8000/50 Color Server

Mac OS Apple Mac OS X

Titles in

Windows Microsoft Windows 2000, Windows XP, Windows Server 2003

italics

About this document

This document describes the features that are available through the print options and utilities such as ColorWise Pro Tools and Command WorkStation. The features are organized as follows:

•Features accessible from or used to set the values in ColorWise Pro Tools

Paper Simulation White Point Editing

–

Color Editor.

–

Spot-On with Two-Color Print Mapping

colors with print colors.

Color Setup

–

and Halftone Screen.

•Features accessible from Command WorkStation

–

ImageViewer

describes the white point editing feature with

describes the feature used to map document

describes the following features: Control Bar, Auto Trapping, Progressives,

describes how to start the ImageViewer application.

Soft Prooﬁng

–

Preﬂight

describes the Soft Proof feature.

describes how to perform the Preﬂight check of your job.

•Features accessible from or used to set the values in utilities other than ColorWise Pro Tools and Command WorkStation

–

Hot Folders Filters

describes the ﬁlters features.

•Other features

Postﬂight

–

Multiple Plate Separations

–

describes the Postﬂight feature and its workﬂow examples.

describes the combine separation feature for more than

four plates.

–

Paper Simulation

describes the ﬁxed Paper Simulation feature.

INTRODUCTION

Graphic Arts Package

The following features are included in Graphic Arts Package:

Feature Where to set values or access Print option name See

Halftone screening

Soft prooﬁng

Multiple plate separations

Fixed paper simulation

ColorWise Pro Tools Color Setup

Command WorkStation Soft Prooﬁng

Halftone Screen Color Setup Features

Combine Separation Multiple Plate Separations

Paper Simulation Paper Simulation

Graphic Arts Package, Premium Edition

The following features are included in Graphic Arts Package, Premium Edition:

Feature Where to set values or access Print option name See

Paper simulation white point editing

Spot-On: two-color print mapping

Control bar

Conﬁgurable auto trapping

Progressives

Halftone screening

ImageViewer

Preﬂight

Hot Folders ﬁle ﬁlters

Postﬂight

Multiple plate separations

ColorWise Pro Tools Color Editor

ColorWise Pro Tools Spot-On

ColorWise Pro Tools Color Setup

Command WorkStation: ImageViewer

Command WorkStation: Preﬂight

Hot Folders Hot Folders Filters

Command WorkStation: ImageViewer

Paper Simulation Paper Simulation White Point

Editing

Two-Color Print Mapping Spot-On with Two-Color Print

Mapping

Control Bar Color Setup Features

Auto Trapping Color Setup Features

Progressives Color Setup Features

Halftone Screen Color Setup Features

ImageViewer

Preﬂight

Postﬂight Postﬂight

Combine Separation Multiple Plate Separations

Fixed paper simulation

Paper Simulation Paper Simulation

INTRODUCTION

Available upgrade

The following feature package is available for Fiery EXP50.

Fiery EXP50

Graphic Arts Package Graphic Arts Package,

Premium Edition

Standard Optional Upgrade Graphic Arts Package to

NOTE: Graphic Arts Package, Premium Edition is supported as standard for Fiery EXP8000.

There is no upgrade package available for Fiery EXP8000.

Enabling the feature at the Fiery EXP50

To access the Graphic Arts Package, Premium Edition features from your computer, the option must be enabled at the Fiery EXP50. A service technician enables the option at your site using the Feature Update or Restore/Update Server Software CD and the hardware key (dongle).

To check whether the option is enabled at the Fiery EXP50, do one of the following:

•Print the Conﬁguration page (see Conﬁguration and Setup)

• Check the Command WorkStation main window (see Utilities)

NOTE: Graphic Arts Package, Premium Edition is supported as standard for Fiery EXP8000.

It is not necessary to enable the feature.

To use Graphic Arts Package, Premium Edition features

Graphic Arts Package, Premium Edition

Updating the status of Graphic Arts Package

Before using Graphic Arts Package, Premium Edition features with the Fiery EXP50, you must enable the option at the Fiery EXP50 and update the status of the option on your computer.

NOTE: Graphic Arts Package, Premium Edition is supported as standard for Fiery EXP8000.

It is not necessary to update the status on your computer.

INTRODUCTION

Updating the status on Windows

Use the following procedure to update the status of Graphic Arts Package on a Windows computer.

NOTE: Before updating the status on a Windows computer, you must install the printer driver.

For information about installing the printer driver, see Printing from Windows.

TO UPDATE THE STATUS ON A WINDOWS COMPUTER

1 Windows 2000: Click Start, choose Settings, and then choose Printers.

Windows XP: Click Start and choose Printers and Faxes. Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and Faxes.

2 Right-click the Fiery EXP8000/50 and choose Properties.

The Properties dialog box appears.

3 Click the Installable Options tab.

4 Select the Two-Way Communication option.

5Type the Fiery EXP50 IP address or DNS name and click Update.

The Graphic Arts Package option that is enabled at the Fiery EXP50 is displayed in the Installed Options area.

NOTE: If you use the Point and Print method to install the printer driver and printer

description ﬁle, you must enable Two-Way Communication on the Fiery Advanced Controller Interface monitor at the Fiery EXP8000/50 for each connection (print, hold, or direct) before you install them on your computer. For more information about Point and Print, see Printing from Windows.

INTRODUCTION

Updating the status on Mac OS

Use the following procedure to update the status of Graphic Arts Package on a computer running Mac OS X.

NOTE: Before updating the status of Graphic Arts Package on a computer running Mac OS X,

install the printer driver. For information about installing the printer driver, see Printing from

Mac OS.

TO UPDATE THE STATUS ON A COMPUTER RUNNING MAC OS X

1 Start Printer Setup Utility or Printer Center.

2 Select your printer in the Printer List.

3 Choose Show Info from the Printer menu.

The Printer Info dialog box appears.

4 Click Name and Location and choose Installable Options.

5 Select Fiery Graphic Arts Package, Premium Edition from the GA Package list.

NOTE: If the Two-Way Communication feature is enabled, the option that is enabled at the

Fiery EXP50 appears in the GA Package list.

6 Click Apply Changes.

7 Close the dialog box.

INTRODUCTION

Setting up your monitor and the monitor proﬁle

Some Graphic Arts Package features require that a job be displayed with correct colors on your monitor.

The following features require the correct monitor display:

•Paper Simulation White Point editing (see page 14)

•Soft Prooﬁng from Command WorkStation (see page 55)

•ImageViewer previewing from Command WorkStation (see page 53)

To display the colors correctly on your monitor, you must set up the monitor display according to the manufacturer’s recommendations, and specify the correct monitor proﬁle for your monitor.

Specify the following settings for the monitor display:

•At the monitor: Brightness, Contrast, and Temperature

•From the control panel of the operating system: Resolution, Refresh rate, and Number of colors

For more information about setting up your monitor and the monitor proﬁle, see the documentation that accompanies the monitor.

PAPER SIMULATION WHITE POINT EDITING

Although an ICC proﬁle contains a deﬁnition of “white,” the white may not always visually match the human eye, requiring a perceptual adjustment. The Paper Simulation White Point editing feature allows you to perceptually adjust the hue, brightness, and saturation of the simulated paper white deﬁned in the ICC proﬁle.

Paper simulation workﬂow

You can print a job with the Paper Simulation feature set to On from the printer driver without customizing paper simulation. Many jobs may print satisfactorily with the ﬁxed default Paper Simulation setting. However, you can customize the paper simulation by editing the white point values with ColorWise Pro Tools Color Editor. After you customize the values, print the job with the custom paper simulation values from the printer driver by setting the Paper Simulation print option to On.

To print a job with the ﬁxed Paper Simulation setting, use the procedure on page 15. For more information about editing Paper Simulation White Point values and printing with custom paper simulation values, see page 16.

PAPER SIMULATION WHITE POINT EDITING

Printing with default Paper Simulation

Use the following procedure to print a job with the ﬁxed Paper Simulation value.

NOTE: The procedures for printing a job from a Mac OS or a Windows computer are similar.

TO PRINT A JOB WITH DEFAULT PAPER SIMULATION

1 Choose Print from your application.

2 Select Fiery EXP8000/50 as your printer and click Properties.

The Properties dialog box appears with the Fiery Printing tab selected.

3 Click the ColorWise icon.

4 Click Expert Settings.

The Expert Color Settings dialog box appears.

5 Select Paper Simulation.

6 Click OK to close the Expert Color Settings dialog box.

7 Click OK to close the Properties dialog box.

8 Click Print.

The job prints with the default Paper Simulation White Point setting.

Paper Simulation print option

The following values are available for the Paper Simulation print option:

•Off (Default)

•On

NOTE: If you have not edited the Paper Simulation White Point values with ColorWise Pro

Tools Color Editor and selected On for this option, your job is printed with the default Paper Simulation values. If you edited the values, your job is printed with the custom Paper Simulation values.

PAPER SIMULATION WHITE POINT EDITING

Paper Simulation White Point editing

Your job may print satisfactorily with the ﬁxed Paper Simulation setting. However, you can customize the Paper Simulation setting by editing the Paper Simulation White Point values with ColorWise Pro Tools Color Editor.

Paper Simulation White Point dialog box

The Paper Simulation White Point dialog box displays Hue, Brightness, and Saturation sliders. A graphic under each slider displays the current setting. To adjust the settings, drag the slider left or right, or type a value in the editable text ﬁeld to the right of the slider bar.

NOTE: The sliders do not show absolute values. The slider position and associated values are

relative to the paper white deﬁnition in effect when you open the dialog box.

Hue

This setting allows you to change the hue of the Paper Simulation White Point. Specify a value between 0.0 and +359.9. If you specify a value greater than 359.9, it automatically changes to 359.9. If you specify a value less than 0.0, it automatically changes to 0.0.

Brightness

This setting allows you to change the brightness of the Paper Simulation White Point. Specify a value between 0.0 and 100.0 (inclusive). If you specify a value greater than 100.0, it automatically changes to 100.0. If you specify a value less than 0.0, it automatically changes to 0.0.

Saturation

This setting allows you to change the saturation of the Paper Simulation White Point. Specify a value between 0.0 and 100.0 (inclusive). If you specify a value greater than 100.0, it automatically changes to 100.0. If you specify a value less than 0.0, it automatically changes to 0.0.

PAPER SIMULATION WHITE POINT EDITING

Preview

This area in the lower-left corner of the dialog box displays a preview of the paper simulation color, surrounded by a white border for contrast. The preview is based on the monitor proﬁle you speciﬁed next to Current Monitor Proﬁle.

To preview the color correctly with your monitor, select the Monitor Compensation option, and then select the correct monitor proﬁle for your monitor. For more information, see

page 19.

NOTE: To display the colors correctly with your monitor, you must set the monitor and

monitor settings correctly. For more information, see page 13.

Editing Paper Simulation White Point

To edit a custom proﬁle, do the following:

•Select a CMYK Simulation Proﬁle.

•Select Full (Output GCR) for a simulation method.

• Link the simulation proﬁle to an output proﬁle.

Use the following procedure to access the Paper Simulation White Point dialog box to edit the values.

NOTE: If Paper Simulation is set to On, and you have deﬁned a substitute color as

C=0, M=0, Y=0, K=0, the values deﬁned in Substitute Colors override those for Paper Simulation. For information about Substitute Colors, see Color Printing.

TO ACCESS THE PAPER SIMULATION WHITE POINT DIALOG BOX

1 Start ColorWise Pro Tools and connect to the Fiery EXP8000/50.

Start ColorWise Pro Tools from a stand-alone application or Command WorkStation, at your computer or at the monitor connected to the Fiery EXP8000/50.

2 Click Color Editor.

1 Select Simulation

PAPER SIMULATION WHITE POINT EDITING

3 Select Simulation from the View list.

NOTE: You can edit the white point values of simulation proﬁles only. You cannot edit those of

output proﬁles.

4 Select a simulation proﬁle and click Select.

The Color Editor dialog box appears.

1 Select Full (Output GCR) 2 Output proﬁle name

5 Select Full (Output GCR) in the Edit Mode menu.

1 2

6 Select an output proﬁle to link to the edited simulation proﬁle.

NOTE: When you print a job with the edited simulation proﬁle, you must select the same

output proﬁle you linked to here to realize the effect of the Paper Simulation White Point editing.

PAPER SIMULATION WHITE POINT EDITING

7 Click Paper Simulation.

The Paper Simulation White Point dialog box appears.

Use the following procedure to edit the Paper Simulation White Point values.

TO EDIT PAPER SIMULATION WHITE POINT VALUES

1 Select the Monitor Compensation option in the Paper Simulation White Point dialog box.

2 Make sure that the correct monitor proﬁle for your monitor is displayed next to Current

Monitor Proﬁle.

3 If the correct monitor proﬁle is not selected, click Monitor.

The Select Monitor Proﬁle dialog box appears.

4 Select ICC Proﬁles from the Format list.

5 Select the monitor proﬁle for your monitor and click Open.

The Paper Simulation White Point dialog box appears.

6 Edit the Hue, Brightness, and Saturation values.

Edit the values by dragging the sliders or typing values in the text ﬁelds. For detailed information about the Paper Simulation White Point dialog box, see page 16.

7 View the changes in the preview patch in the lower-left corner of the dialog box.

8 Click Print.

The Print Test dialog box appears.

PAPER SIMULATION WHITE POINT EDITING

9 Select settings from the Paper Size and Input Tray lists and click Print.

10 Click OK to close the Paper Simulation White Point dialog box.

11 Click Save in the Color Editor dialog box.

The Save dialog box appears.

12 Type a new name and click Save.

13 Quit Color Editor.

Printing with custom paper simulation values

After you edit the paper simulation values in Color Editor, you can print a document with the custom paper simulation values from the printer driver. You can also override the setting with Command WorkStation.

NOTE: The procedures for printing a job from a Windows or Mac OS computer are

fundamentally the same. The following procedure uses illustrations from a Mac OS computer.

Use the following procedure to print a job with the custom paper simulation values.

TO PRINT A JOB WITH EDITED PAPER SIMULATION VALUES

1 Choose Print in your application.

The print dialog box appears.

2 Click Copies & Pages and choose ColorSync from the menu.

The ColorSync pane appears.

3 Select In Printer from the Color Conversion list.

4 Click Copies & Pages and choose ColorWise from the menu.

The ColorWise pane appears.

5 Select Two-Way Communication.

For information about enabling Two-Way Communication, see Printing from Mac OS.

PAPER SIMULATION WHITE POINT EDITING

6 Click Expert Settings in the Print Mode area.

The ColorWise Expert Settings dialog box appears.

7 Select the custom simulation proﬁle from the CMYK Simulation Proﬁle list.

Select the simulation proﬁle you saved after editing the Paper Simulation White Point values in the previous section.

8 Select the Full (Output GCR) option.

9 Select Paper Simulation.

10 Select the output proﬁle that you linked to the custom simulation proﬁle from the Output

Proﬁle menu.

11 Click OK.

The ColorWise pane reappears.

12 Click Print.

The job is printed using your custom CMYK Simulation Proﬁle with the edited White Point values.

SPOT-ON WITH TWO-COLOR PRINT MAPPING

In addition to managing “named” colors, Spot-On allows you to assign spot colors and process colors to the generic colors that are used in a job. The Two-Color Print Mapping feature is designed for print shop operators to do the prooﬁng for a two-color press. You can print a two-color job to a two-color device by mapping the colors in a job to the colors that are already created on the device.

For information about managing named colors with Spot-On, see Color Printing.

NOTE: The RGB colors in a document are ﬁrst converted to CMYK colors and then the

Two-Color Print Mapping is applied.

The following limitations apply when you use the Two-Color Print Mapping feature:

• The settings for Two-Color Print Mapping are ignored when the Composite Overprint and Combine Separation features are enabled.

•Postﬂight does not report on Two-Color Print Mapping, because Postﬂight reports the source state of a document. The color space that the digital press receives before any conversions is reported in Postﬂight.

•You cannot select the Two-Color Print Mapping and Substitute Color options at the same time. Also, you cannot select a substitute color to be used in the Two-Color Print Mapping feature.

Using Two-Color Print Mapping

In the Two-Color Print Mapping feature, the colors that are used in a job are mapped with the colors to print. From the Spot-On main window, open the Deﬁne Two-Color Print Map dialog box and then reassign the document colors to the named or custom colors to print with. When the feature is turned on from the printer driver, Fiery EXP8000/50 replaces the document colors with the colors you deﬁned in the Deﬁne Two-Color Print Map dialog box. You can also override the print option setting using Command WorkStation.

SPOT-ON WITH TWO-COLOR PRINT MAPPING

Deﬁning a color for Two-Color Print Mapping

Use the following procedure to deﬁne the color mappings in the Two-Color Print Map dialog box.

TO DEFINE A COLOR FOR TWO-COLOR PRINT MAPPING

1 Start ColorWise Pro Tools and connect to the Fiery EXP8000/50.

Start ColorWise Pro Tools from a stand-alone application or Command WorkStation, at your computer or at the monitor connected to the Fiery EXP8000/50.

1 Output proﬁle

2 Click Spot-On.

The Select Output Proﬁle dialog box appears.

3 Select an output proﬁle and click OK.

The Spot-On main window appears.

NOTE: The Two-Color Print Mapping group always appears at the top of the list. It is not

included in the priority arrangements.

4 Double-click Two-Color Print Mapping.

The two colors for mapping appear.

SPOT-ON WITH TWO-COLOR PRINT MAPPING

5 Double-click one of the color lines.

The Deﬁne Two-Color Print Map dialog box appears.

The document colors on the left side represent the colors that are used in a job. Map these colors to the named or process colors that you select on the right. Initially, Black and Magenta appear as placeholder colors on the left.

NOTE: When you change the color selection on the left, the selection on the right changes to

Process Color with the same color name. This is to avoid accidentally mapping a color to a different process color.

6 Select a process color from the Print list on the left.

Select Cyan, Magenta, Yellow, or Black.

7 Select Named Color Group or Process Color on the right.

To select a named color, continue the steps. To select a process color, go to step 10.

8 Select a group from the Named Color Group list.

Select from the list of the named color groups that are already deﬁned in Spot-On.

The preﬁx of the selected group appears on the left side of the Named Color ﬁeld. The sufﬁx appears on the right side of the ﬁeld.

SPOT-ON WITH TWO-COLOR PRINT MAPPING

9Type the name of the named color in the Named Color ﬁeld.

NOTE: The names are case sensitive. Type the name exactly as it appears in the list in Spot-On.

If the name you typed in the Named Color ﬁeld is invalid, the Fiery EXP8000/50 displays an error message.

NOTE: If the Named Color Group option is selected and the Named Color ﬁeld is not ﬁlled,

the Fiery EXP8000/50 displays an error message. Type a name in the Named Color ﬁeld or select the Process Color option instead of the Named Color Group.

10 Select Cyan, Magenta, Yellow, or Black from the Process Color list.

11 Repeat steps 6 through 10 for the other color to map.

NOTE: You cannot select the same process color for both document colors. When a process

color is selected for a document color, it is grayed out for the other document color.

12 When you are done selecting the colors, click OK.

The changes in the Deﬁne Two-Color Print Map are saved and the newly assigned mapping colors and values appear in the Spot-On main window.

Printing a job with Two-Color Print Mapping

After you map the colors in the Two-Color Print Map dialog box in Spot-On, you can print a two-color job from the printer driver. You can also override the print option setting using Command WorkStation.

NOTE: When you print a job, select the same output proﬁle from the printer driver as the one

that was selected in the Select Output Proﬁle dialog box. Otherwise, print mappings that are deﬁned in Spot-On have no effect.

NOTE: The procedures for printing a job from a Mac OS and a Windows computer

are similar.

SPOT-ON WITH TWO-COLOR PRINT MAPPING

TO PRINT A TWO-COLOR JOB

1 Open a document in your application.

2 Choose Print.

3 Click Copies & Pages and choose ColorWise from the menu.

The ColorWise pane appears.

4 Select 2-Color Print Mapping.

5 Click Print.

The job is printed with the mapping you deﬁned in Spot-On.

COLOR SETUP FEATURES

With Graphic Arts Package, Premium Edition, ColorWise Pro Tools Color Setup offers the following customizable features, in addition to the Color Process Flow feature:

• Control Bar

•Auto Trapping

•Progressives

•Halftone Simulation

For information about Color Process Flow, see Color Printing.

NOTE: The ColorWise Pro Tools applications for Windows and Mac OS computers

are similar.

ColorWise Pro Tools Color Setup features

Access the Control Bar, Auto Trapping, Progressive, and Halftone Simulation features from Color Setup.

For information about these features, see the following sections:

• Control Bar (see page 29)

•Auto Trapping (see page 37)

•Progressives (see page 42)

•Halftone Simulation (see page 46)

COLOR SETUP FEATURES

Using Color Setup

Use the following procedure to start Color Setup.

NOTE: For information about installing ColorWise Pro Tools and conﬁguring a connection,

see Color Printing.

TO START COLOR SETUP

1 Start ColorWise Pro Tools and connect to the Fiery EXP8000/50.

NOTE: Start ColorWise Pro Tools from a stand-alone application or Command WorkStation,

at your computer or at the monitor connected to the Fiery EXP8000/50.

2 Click Color Setup.

The Color Setup main window appears with the Color Process Flow tab selected.

+ 64 hidden pages